Betonla uyumlu polipropilen elyaf takviyeli kompozitlerin üretimi ve özellikleri
Production and properties of concrete compatible polypropylene fiber reinforced composites
- Tez No: 201581
- Danışmanlar: DOÇ. DR. MUSTAFA ÖKSÜZ
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Polimer Bilim ve Teknolojisi, İnşaat Mühendisliği, Metallurgical Engineering, Polymer Science and Technology, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metal Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 157
Özet
Bu çalışmada; polipropilen elyaf takviyelendirmenin betonun özellikleri üzerindeki etkileri incelenmiştir. Bu kapsamda; polipropilen elyaf % 0.2 0.4 0.6 0.8 1.0 ve û/oO.25 0.50 0.75 oranlarında diğer betonu oluşturan agregalar ile karıştırılıp beton kompozitleri üretilmiştir. Üretilen bu numunelere çeşitli testler uygulanarak katkısız beton/kontrol betonu ile kıyaslaması yapılmıştır. Kırılan veya çatlayan yüzeyler incelenerek malzemenin kırılırken sergilediği eğilimler belirlenmiştir. Sonuçlardan elde edilen veriler ışığında beton kompozitlerin eğme ve basma dayanımlarında önemli bir iyileşme olmadığı tespit edildi. Hatta basma dayanımı elyaf oranı arttıkça dayanımın azaldığı belirlenmiştir. Buna rağmen beton kompozitlerin darbe mukavemetinde önemli artışlar (%220) olduğu belirlendi.
Özet (Çeviri)
this study, the effects of polyproylene fiber reinforcement on concrete properties have been experimental investigated. For this purpose different rates such as 0.2, 0.4, 0.6, 0., 1.0 % and 0.25, 0.50, 0.75 % polypropylene fiber has been mixed with other agregas to produce concrete composites. The produced samples from the polypropylene fiber and concrete mixtures have been compared to püre concrete (control concrete) throughout various duration tests respectively. And also the cracked and broken surfaces have been examined to determine the tendency of the polypropylene fiber reinforced concrete during the processing of test. The obtained results showed that addition of polypropylene fiber reduced compression and bending strengths of the concrete. in spite of the compression and bending test the impact resistance of concrete raised (220 % ) depend on the fiber rates.
Benzer Tezler
- Comparative evaluation of steel mesh, steel fibre and high performance polypropylene fiber reinforced shotcrete/ concrete in panel test
Çelik hasır, çelik fiber ve yüksek performanslı polipropilen donatılı (püskürtme) betonların panel test metodu ile karşılaştırmalı olarak değerlendirilmesi
OKAN CENGİZ
Yüksek Lisans
İngilizce
2001
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. LÜTFULLAH TURANLI
- Studies of Cs-137 exchange on clinoptilolite zeolite by tracer technique
Başlık çevirisi yok
ABDELRAHİM ABUSAFA
Doktora
İngilizce
1999
Kimya MühendisliğiOrta Doğu Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN YÜCEL
- Hasır çelik takviyeli çelik-beton kompozit döşeme plaklarının pozitif moment bölgesindeki davranışı ve taşıma gücü
The Behaviour and the load carrying capacity of composite slabs with reinforcing lattice used as connector, in the zone of positive bending moments
CAVİDAN YORGUN
- Microbial nitrate reduction induced autonomous self-healing in concrete
Betonda mikrobiyal nitrat indirgenmesi ile gerçekleşen otonom kendini onarma
YUSUF ÇAĞATAY ERŞAN
Doktora
İngilizce
2016
BiyoteknolojiGhent UniversityBiyomühendislik ve Bilimleri Ana Bilim Dalı
PROF. DR. NICO BOON
- Kompakt yarma-çekme numunelerinin betonun kırılma mekaniğine göre uygulama potansiyelinin araştırılması
Investigation of the applicability potential of compact splitting specimens according to the concrete fracture
BUHRANUR SAĞLAM
Yüksek Lisans
Türkçe
2023
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. RAGİP İNCE