Geri Dön

Brushless DC motor speed control circuit design

Fırçasız doğru akım motoru hız kontrol devresi tasarımı

  1. Tez No: 224066
  2. Yazar: ALPER KURDOĞLU
  3. Danışmanlar: Y.DOÇ.DR. ÖZGÜR ÜSTÜN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Hız kontrol devresi, Fırçasız Dogru Akım Motoru, FDAM, BLDC, Speed Control Circuit, Brushless DC Motor, BLDC, FDAM
  7. Yıl: 2007
  8. Dil: İngilizce
  9. Üniversite: İstanbul Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalısmada 24V, 22W lık sensörlü bir fırçasız dogru akım motorunun hız kontrol devresinin pcb üzerinde yapımı ve bu devrenin çalısma ilkesinin detaylı olarak açıklanması hedeflenmistir. Çalısmaya, fırçasız dogru akım motorlarının genel yapısı hakkında bilgi verilerek çalısma prensiplerinin açıklanmasıyla baslanmıstır. Daha sonra fırçasız dogru akım motorlarında 4 bölge kontrolü anlatılmıs, kapalı çevrim hız kontrolü ve 3 fazlı FDAM motor komutasyonu genel olarak açıklanmıstır. Çalısmanın 4. bölümünde kapalı çevrim hız kontrol devresinin çalısma teorisine girilmis, devreyi olusturan 3 temel komponent olan MC33035, MC33039 entegreleri ve MSK3003 güç modülünün özellikleri ve devre yapıları analiz edilmistir. Kontrol devresinin beyni olan MC33035 entegresinin decoder yapısı incelenerek hall sensörlere ait dogruluk tablosu verilmis ve motorun maruz kaldıgı komütasyon islemi adım adım incelenmistir. Bu arada devreye ait çesitli fonksiyonlar açıklanmıstır. 5. bölümde uygulama kısmına geçilerek, PCB devrenin Altium Designer programında olusturulma asaması adım adım anlatılmstır. Son olarak olusturulan devre üzerinde yapılan testlere ait çıktılar verilerek bunlar yorumlanmıstır.

Özet (Çeviri)

The purpose of this study is designing speed control driver for a 24V, 22W sensored brushless DC motor on Printed Circuit Board (PCB) and explaining the working theory of the circuit. At the preliminary stage of the thesis, operation principle of sensored brushless dc motor has been explained as giving general informartion about the structure and construction. Subsequently Four Quadrant control concept for a DC motor has been described then closed loop speed control and three phase motor commutation has been explained roughly. In the 4th section, has been entered into the construction and operation theory of the speed control application then analyzed characteristics and circuit structure belong to the three major components MC33035, MC33039 microcontrollers and MSK3003 power pack. Then the decoder structure of the MC33035 which is the brain of the control circuit has been analyzed and explained the comutation process of the motor as giving the truth table belongs to the hall sensors. By the way some ancillary functions belong to the circuit has been described in this section. In the 5th section, has been discussed the manufacturing process of the circuit composed by Altium Designer software. Finally, some tests on the circuit has been given and anlyzed.

Benzer Tezler

  1. Design and implementation of a fuzzy logic based drive system for current, position and speed control of a brushless DC motor

    Fırçasız DC motorların tork, pozisyon, akım ve hız kontrolleri için bulanık mantık kontrollü sürücü dizaynı

    DURDU KILINÇ

    Yüksek Lisans

    İngilizce

    İngilizce

    2002

    Elektrik ve Elektronik MühendisliğiÇukurova Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. SÜLEYMAN GÜNGÖR

  2. Brushless DC motor control

    Başlık çevirisi yok

    RECAİ KOLAY

    Yüksek Lisans

    İngilizce

    İngilizce

    1991

    Elektrik ve Elektronik MühendisliğiDokuz Eylül Üniversitesi

    DOÇ.DR. N. SÜHA BAYINDIR

  3. Fırçasız doğru akım motorun tasarımı ve denetimi

    Design and control of brushless DC motor

    HAYATULLAH NORY

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Elektrik ve Elektronik MühendisliğiFırat Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. HASAN KÜRÜM

  4. Fırçasız doğru akım motoru konum kontrolörü tasarımı

    Design of brushless dc motor position controller

    HASAN GÖDEKOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    Y.DOÇ.DR. ÖZGÜR ÜSTÜN

  5. Yabancı uyartımlı ile fırçasız DC motorların hız ve tork karakteristiklerinin karşılaştırılması

    Comparison of speed and torque characteristics of separately excited DC motors and brushless DC motors

    HÜSEYİN CEM BAYRAKTAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Elektrik ve Elektronik Mühendisliğiİstanbul Aydın Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. HASAN HÜSEYİN BALIK