U-borulu gövde-boru tipi bir ısı değiştirgecinin deneysel olarak incelenmesi
Experimental investigation of a U-tube shell and tube heat exchanger
- Tez No: 244738
- Danışmanlar: PROF. DR. SADIK KAKAÇ, YRD. DOÇ. DR. NİLAY SEZER UZOL
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2009
- Dil: Türkçe
- Üniversite: TOBB Ekonomi ve Teknoloji Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Bölümü
- Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Sayfa Sayısı: 99
Özet
Bu çalışmada U-borulu, şaşırtma levhalı, gövde-boru tipi bir ısı değiştirgecinin deneysel olarak incelenmesi yapılmıştır. Bir ısı değiştirgeci tasarlanmış ve deney seti kurularak farklı akış debileri ve farklı sıcak ve soğuk akım giriş sıcaklıklarında deneyler yapılmıştır. Üzerinde deney yapılan U-borulu gövde-boru tipi ısı değiştirgeci iç ve dış çapları sırasıyla 9 mm ve 12 mm olan 32 borudan oluşur. Isı değiştirgecinin gövde uzunluğu 420 mm, gövde iç çapı 230 mm'dir. Bell-Delaware ve Kern Metod'ları ve deney verileri kullanılarak bu ısı değiştirgecinin ısıl performansını değerlendirmek için gerekli analizler yapılmış ve analiz sonuçları deneysel verilerle karşılaştırılmıştır. Deney düzeneğine yerleştirilmiş olunan U-borulu gövde-boru tipi ısı değiştirgecine ait ısıl performans değerlerinin %14-22 aralığında olduğu görülmüştür. Yapılan analizlere göre gövde ve boru tarafına ait teorik ve deneysel çıkış sıcaklıkları arasındaki farkın en fazla %2 olduğu gözlemlenmiştir.
Özet (Çeviri)
In this study, an experimental investigation of a U-tube, baffled, shell and tube heat exchanger was performed. A heat exchanger was designed, and by setting an experimental set-up, the experiments were carried out for different mass flow rates and different inlet temperatures of hot and cold streams. The U-tube shell and tube heat exchanger, which was used in the experiments, consists of 32 tubes. Each tube has inner and outer diameters of 9 mm and 12 mm, respectively. The shell length of the heat exchanger is 420 mm and the inner shell diameter is 230 mm. Using the Bell-Delaware and Kern Methods and the experimental data, the analyses were performed to investigate the thermal performance of the heat exchanger, and the results of the analyses were compared with the experimental data. It is seen from the results that the thermal performance rate of the U-tube shell and tube heat exchanger is in the range of 14-22%. According to the analyses, it is also observed that the difference between the theoretical and the experimental outlet temperatures of the shell and tube sides is maximum 2%.
Benzer Tezler
- Bir ısı değiştiricisinin hesaplamalı akışkanlar dinamiği ile modellemesi
Modeling of a heat exchanger with computational fluid dynamics
MEHMET AKİF KARTAL
Doktora
Türkçe
2023
Makine MühendisliğiMarmara ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. AHMET TALAT İNAN
DOÇ. DR. HASAN KÖTEN
- Gizli ısı depolamalı U borulu ısı değiştiricilerin ısıl analizi
Thermal analysis of U tube heat exchangers with latent heat storage
ABDULHAMİT ERDOĞAN
Yüksek Lisans
Türkçe
2018
Makine MühendisliğiFırat ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÜLŞAH ÇAKMAK
- Gövde-helis sarmal borulu ısı değiştiricilerde ısıl performansın iyileştirilmesi
Thermal performance enhancement of shell and helically coiled tube heat exchangers
ALPER GÜNGÖR
Doktora
Türkçe
2022
EnerjiGazi ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
PROF. DR. ADNAN SÖZEN
- Basınçlı su reaktörleri U borulu buhar üreteçlerinin termo-hidrolik modellenmesi
Thermal-hydraulic analysis of U-tube steam generators for gressurized water reactors
SÜLEYMAN ÖZKAYNAK
- Seri bağlı U-borulu vakum tüplü güneş kolektöründe TİO2/su nanoakışkanı kullanımı
Using TİO₂/water nanofluid in a series connected U-pipe evacuated tube solar collector
İSMAİL ÖZCAN
Doktora
Türkçe
2023
EnerjiIsparta Uygulamalı Bilimler ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
PROF. DR. ARİF EMRE ÖZGÜR
DOÇ. DR. AHMET ÖZSOY