Karbotermal indirgeme yöntemi ile bor karbür üretimi
Production of the boron carbide by using carbothermal reduction method
- Tez No: 245230
- Danışmanlar: YRD. DOÇ. DR. AHMET ATASOY
- Tez Türü: Yüksek Lisans
- Konular: Teknik Eğitim, Technical Education
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2009
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metal Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 81
Özet
Karbotermal indirgeme metodu, Bor karbür üretiminde kullanılan ekonomik yöntemlerden biridir. Bu çalışmada bor karbür üretimi için hammadde olarak borik asitten elde edilmiş bor oksit ve karbon kullanılmıştır. Bor oksit ve karbon belli oranlarda harmanlanarak deney işlemine hazır hale getirilmiştir. Hazırlanan numuneler grafit potanın içerisine yerleştirilerek yatay tüp fırınında argon atmosferinde işleme tabi tutulmuştur. Deneyler yatay tüp fırınında 1300?1650 oC'ler arasında 1-4 saat aralığında gerçekleşmiştir. Yapılan deneylere göre XRD, SEM ve EDS analizlerini incelediğimizde 1600?1650 oC'de 2-4 saat zaman aralığında gerçekleşen deneylerde bor karbür fazı tespit edilmiştir. Elde edilen tozun SEM görüntülerini incelediğimizde tane boyutunun 3-25 mikron aralığında olduğu saptanmıştır.
Özet (Çeviri)
Carbothermic method is an economic method to produce boron carbide powder. In the present thesis, this method was utilized to produce a boron carbide powder using commercial purity raw materials. Boron oxide as a source of boron, and carbon active and petroleum coke as reducing agents were used. Mixtures of boron oxide and carbon bearing material with a particle size of less than 25 mm were placed in a graphite crucible and heated under flow of argon and nitrogen atmospheres in a tube furnace to 1300?1650 oC for 1?4 h. This resulted in the formation of boron carbide powder with or without un-reacted starting raw materials. It was found that the optimum weight ratio of boron oxide to carbon bearing material was 4.1 and 6 for petroleum coke and carbon active, respectively. Boron carbide phase has been obtained by waiting at 1600 and 1650 oC for 2-4 h in a horizontal tube furnace under flow of argon atmosphere. XRD, SEM and EDS analyses of the obtained powder have shown that boron carbide phase observed at these temperatures. When we examine the SEM visages of the obtained powder, it is clear to see that the dimension of the particle is between 3 and 25 micron.
Benzer Tezler
- Bor karbür üretimi ve özelliklerinin belirlenmesi
Boron cardide production and determination of its properties
CELİL GÜLDAŞ
Yüksek Lisans
Türkçe
2018
Metalurji MühendisliğiMarmara ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MUSTAFA ÇAKIR
- Dinamik karbotermal indirgeme ile bor karbür tozu üretim parametrelerinin incelenmesi
Investigation of boron carbide powder production parameters by dynamic carbotermal reduction
AYKUT ÖZKAN
Yüksek Lisans
Türkçe
2019
Mühendislik BilimleriSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NURAY CANİKOĞLU
- Dinamik / termokimyasal yöntemle TiB2+B4C kompozit toz üretimi
Production of B4C + TiB2 composite powder via dynamic / carbothermal reduction
YUNUS EMRE VATANDAŞ
Yüksek Lisans
Türkçe
2022
Metalurji MühendisliğiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ OSMAN KURT
- Dinamik/termokimyasal yöntemle TiB2, B4C ve BN seramik tozlarının üretimi
Synthesizing TiB2, B4C and BN ceramic powders using dynamic/thermochemical method
ZEYNEP YILDIZLI
Yüksek Lisans
Türkçe
2019
Mühendislik BilimleriSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ OSMAN KURT
- Development and characterization of high entropy (HfTiZrMn/Cr)B2 based ceramics
Yüksek entropi (HfTiZrMn/Cr)B2 bazlı seramiklerin geliştirilmesi ve karakterizasyonu
İLAYDA SÜZER
Yüksek Lisans
İngilizce
2022
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. DUYGU AĞAOĞULLARI