Geri Dön

Situational method engineering for requirement engineering phase

Gereksinim mühendisliği fazı için durumsal yöntem mühendisliği

  1. Tez No: 245833
  2. Yazar: SEÇİL AYDIN
  3. Danışmanlar: YRD. DOÇ. DR. DEEPTİ MİSHRA
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2009
  8. Dil: İngilizce
  9. Üniversite: Atılım Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 91

Özet

Bu calışma, gereksinim mühendisliği fazına odaklanmış, varolan gereksinim mühendisliği fazının yöntemlerini incelemekte ve yazılım projelerindeki kısıtlamaları göz önünde bulundurarak karşılaştırmaktadır. Bazı projeler ve durumlar için bazı yöntemlerin daha uygun olduğu anlaşılmıştır. Bu yöntemler; projenin özelliklerine duruma ve projeye göre biçimlendirilmelidir. Bu durumsal yöntem mühendisliğinin konusudur ve yöntemin geliştirilmekte olan projenin ihtiyaçlarına göre biçimlendirilmesidir. Yöntemleri değişik proje özelliklerine göre birbirinden ayırmak amacıyla, yeni bir kategorilendirme stili yaratılmıştır. Bu kategorilendirme stili ve durumsal yöntem mühendisliği kullanılarak yeni bir program geliştirilmiştir. Bu program varolan programlarla karşılaştırılmıştır. Yayınlanmış ve sektörden gelen geri bildirimler toplanmıştır. Bu geri bildirimler sunulmuş ve ileri sürülmüş olan yöntemin geliştirilmesi için tartışılmıştır.

Özet (Çeviri)

This thesis focuses on requirements engineering phase and reviews the existing requirement engineering methods and compares them according to the constraints in the software projects. It has been found that some techniques are better suited to particular project teams and circumstances. Besides, methods are normally general in nature and they can not be used directly without adapting them according to the characteristics of the project. This is the concern of situational method engineering, where the term situational method is used to refer to a method tailored to the needs of a particular development setting. A criterion methodology is established to distinguish requirement engineering methods from each other according to different characteristics of the project. A tool is implemented to store different methods according to this criterion methodology by using Situational Method Engineering. This tool is compared with other tools that exist in the literature. The tool is published and validated by collecting data from the industry. The results gathered from the industry are presented and discussed for the improvement of proposed approach.

Benzer Tezler

  1. Değişim mühendisliği

    Başlık çevirisi yok

    ESRA SEZGİN

    Yüksek Lisans

    Türkçe

    Türkçe

    1996

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. MEHMET TANYAŞ

  2. Turistik faaliyetlerin seçimine yönelik bir çok ölçütlü karar destek modeli

    A multi-attribute decision support model for selection of touristic activities

    SAİT GÜL

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF. DR. Y. İLKER TOPÇU

  3. Gemiler için çözücü bazlı karbon tutma sistemlerinin incelenmesi

    An investigation on the solvent based carbon capture systems for ships

    ENGİN GÜLER

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Gemi Mühendisliğiİstanbul Teknik Üniversitesi

    Gemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı

    PROF. DR. SELMA ERGİN

  4. Development and testing novel guidance algorithms for visual drone interception

    Görsel dron yakalama için yeni güdüm algoritmalarının geliştirilmesi ve testi

    AHMET TALHA ÇETİN

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    DOÇ. DR. EMRE KOYUNCU

  5. Rejeneratörlü klima sistemlerinin ısıl performanslarının deneysel ve teorik olarak incelenmesi

    Experimental and numerical investigation of thermal performance of regenerator air conditioning systems

    TUNAY KARA

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MESUT GÜR