Geri Dön

Tendon sütür ve düğüm tekniklerinin biyomekanik karşılaştırmaları

Biomechanical comparisons of suture and wedding tendon techniques

  1. Tez No: 260303
  2. Yazar: VOLKAN ERĞAN
  3. Danışmanlar: YRD. DOÇ. DR. ÖZAL ÖZCAN
  4. Tez Türü: Tıpta Uzmanlık
  5. Konular: Ortopedi ve Travmatoloji, Orthopedics and Traumatology
  6. Anahtar Kelimeler: Biomechanical stress, Duncan knot technique, Flexor tendon, Modified Kessler suture technique
  7. Yıl: 2009
  8. Dil: Türkçe
  9. Üniversite: Afyon Kocatepe Üniversitesi
  10. Enstitü: Tıp Fakültesi
  11. Ana Bilim Dalı: Ortopedi ve Travmatoloji Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 80

Özet

Amaç: Koyun fleksör tendonlarında modifiye kessler ve bunnel sütür tekniklerine uygulanan cerrahi düğümlerin literatür de olmayan yalnız artroskopik cerrahide kullanılan Weston ve Duncan düğüm tekniklerinin fleksör tendonlarda uygulanması ve bu üç düğüm tekniğinin biyomekanik olarak dayanıklılığı ve düğüm çözülme oranlarının incelenerek uygun düğüm tekniğinin bulunması.Gereç ve Yöntem: Çalışmamızda 100 koyunun 200 ön kolundan elde edilen fleksör digitorum profundusları kullanıldı. 25 grup oluşturuldu. Her grup için 8'er adet tendona distraksiyon uygulandı. K grubu kontrol grubu iken diğer gruplara tenorafi yapıldı. Tenorafi uygulanan gruplarda modifiye kessler ve bunnel sütür teknikleri, 3,0 ve 4,0 prolen, 3,0 ve 4,0 ethibond sütürleri ile , Weston, Duncan ve cerrahi düğümleri kombine edildi. Taze kadavra koyun tendonları sütüre edildikten sonra 20mm\ dk uzama hızındaki instron cihazında sütürler tamamen kopana dek uzamaya devam edildi. Tüm tendonların maksimum gerilme güçleri, elastik modülüş değerleri ve düğümlerin kopma şekilleri değerlendirildi.Bulgular: Tenorafi uygulanan gruplar içerinde maksimum gerilim gücü en yüksek MKD3E grubu iken en düşük değer MKSL4P grubunda bulundu. Gruplar arasındaki farklılık maksimum gerilim gücü açısından istatistiksel olarak anlamlı fark mevcuttu. En düşük değer açısından MKSL4P grubuna en yakın grup BSL4E grubu idi. Bu üç grupta arasında istatistiksel olarak anlamlı fark bulundu. Tenorafi uygulanan gruplar içerinde elastik modülüs değerleri karşılaştırıldığında en yüksek değer MKD3E grubunda iken en düşük değer MKSL4P grubunda bulundu. Sağlam tendonlardan oluşan K grubunda ; maksimum gerilme gücü tenorafi uygulanan gruplara göre en yüksek değerde olmasına rağmen elastik modülüs değeri diğer gruplara göre belirgin ölçüde düşük bulundu. Tenorafi uygulanan gruplarda kopma şekilleri karşılaştırıldığında MKD3E ve MKD3P gruplarında düğümde açılma gözlenmedi . %75'i kopma ile sonuçlanırken %25'lik kısmı tendondan sıyrılma ile sonlandı.Sonuç: Modifiye kessler sütür tekniğine Duncan düğüm tekniği uygulanmasıyla elde edilen grubun, diğer tenorafi uygulanan gruplar ile karşılaştırıldığında; maksimum gerilim gücü ve elastik modülüs değerleri belirgin oranda yüksek bulunmuştur. Düğümün kopma şekli olarak tendonda çözülmeye rastlanmamıştırAnahtar kelimeler; Fleksör tendon, Duncan düğüm tekniği, biyomekanik, modifiye kessler

Özet (Çeviri)

Objective: To examine the adequacy of surgical knots, including the modified Kessler and Bunnell suture techniques, and the Weston and Duncan knot techniques, which have not yet been examined in the literature but have only been used for arthroscopic surgery, were applied to the flexor tendons of sheeps. Suture adequacy was evaluated on the criteria of biomechanical stability and knot failure rate.Materials and Methods: The flexor digitorum profundus was isolated from both front limbs of 100 sheeps. A total of twenty-five groups were established. For each group, distraction was applied to eight tendons. Group K was set as our control group and all other groups underwent tenography. In the tenography groups, modified Kessler and Bunnell suture techniques were combined with Prolene 3.0 and 4.0 polypropylene suture, Ethibond 3.0 and 4.0 polyester suture, and Weston and Duncan surgical knots. Following the suturing of fresh cadaver sheep, the sheep tendons were subjected to continued elongation using an Instron instrument at a constant rate of 20 mm/min, until suture failure. Maximum tensile strength, elastic modulus values, and failure strains were recorded.Results: Amongst all of the groups subjected to tenography, the MKD3E group exhibited the highest maximum tensile strength, while the MKSL4P group exhibited the lowest tensile strength. The difference between the groups was statistically significant in terms of maximum tensile strength. Regarding the lowest values, BSL4E group was the closest group to MKSL4P group. The difference was statistically significant between all three groups. Within the tenography applied groups, the MKD3E group displayed the highest elastic modulus value, while the MKSL4P group exhibited the lowest value. Our control group, Group K, which was composed of healthy tendons, displayed the highest value of maximum tensile strength compared to the tenography applied groups; however, the elastic modulus value of this group was significantly lower than in all tenography applied groups. When failure strains were compared amongst the tenography applied groups, there was no failure of the knots in either the MKD3E or MKD3P groups. Overall, seventy-five percent of tenography-applied groups resulted in failure and twenty-five percent resulted in stripping.Conclusion: The maximum tensile strength and elastic modulus values of the group, in which modified Kessler suture technique was applied together with Duncan knot technique, were found to be significantly high when compared with the tenography applied groups. In addition, when assessed for failure strain, no snapping of the tendons was observed.

Benzer Tezler

  1. Osteoporotik kemik modelinde yapılan çift sıra rotator manşet tamirinde kullanılan 4 farklı dikiş konfigürasyonun iç sıradaki ankorların yerinden çıkma gücü üzerine etkisi

    The effect of 4 different suture configurations used in double row rotator cuff repair performed in the osteoporotic bone model on the pullout strength of the anchors in the medial row

    HAKAN EŞKARA

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2022

    Ortopedi ve TravmatolojiSağlık Bilimleri Üniversitesi

    Ortopedi ve Travmatoloji Ana Bilim Dalı

    DOÇ. DR. YUNUS İMREN

  2. Biseps uzun başının tenodezinde kullanılan fiksasyon tekniklerinin füzyon öncesi ve sonrası biyomekanik karşılaştırılması

    Biomechanical comparison of primer and post-fusionstability of long head of biceps tenodesis fixation methods

    PELİN COŞKUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine MühendisliğiTOBB Ekonomi ve Teknoloji Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. TEYFİK DEMİR

  3. Dört uzunlamasına bileşenli devamlı epitendinöz sütür ile tendon onarımı ve diğer tekniklerle karşılaştırılması: Tavşanlarda deneysel çalışma

    Four strand tendon repair with uninterrupted epitendinous suture and comparison to other popular techniques: Study on rabbit model

    FATİH ALP ÖZTÜRK

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2020

    Plastik ve Rekonstrüktif CerrahiDokuz Eylül Üniversitesi

    Plastik Rekonstrüktif ve Estetik Cerrahi Ana Bilim Dalı

    PROF. DR. CENK DEMİRDÖVER

  4. Peritendinöz fibrotik yapışıklıkların önlenmesinde emilebilen bariyer kullanımı

    Başlık çevirisi yok

    AYTUN TEMİZ

    Tıpta Uzmanlık

    Türkçe

    Türkçe

    2003

    Ortopedi ve TravmatolojiUludağ Üniversitesi

    Ortopedi ve Travmatoloji Ana Bilim Dalı

    PROF. DR. HÜSEYİN TUFAN KALELİ