Geri Dön

Karbon nanotüpler kullanılarak metal iyonlarının katı-faz ekstraksiyonu ve alevli atomik absorpsiyon spektrometresi ile tayini

Solid-phase extraction of metal ions using carbon nanotubes and determination by flame atomic absorption spectrometry

  1. Tez No: 270188
  2. Yazar: SELİN GÖLLÜ ÖZCAN
  3. Danışmanlar: DOÇ. DR. NURAY ÖĞÜN ŞATIROĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2010
  8. Dil: Türkçe
  9. Üniversite: Hacettepe Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 107

Özet

Bu çalışmada Fe(III), Cu(II), Mn(II), ve Pb(II) iyonlarının alevli atomik absorpsiyon spektrometresi ile tayini için basit bir ayırma ve önderiştirme yöntemi geliştirilmiştir. Bu amaçla, çok duvarlı karbon nanotüpler bir mini kolona doldurulmuş ve katı faz olarak kullanılmıştır. pH, örnek akış hızı ve hacmi, desorpsiyon çözeltisi türü ve engelleme yapan iyonların etkisi gibi deneysel parametreler incelenmiştir. Deneysel çalışmalar boyunca pH 8 ve pH 10 aralığında Fe(III), Cu(II), Mn(II), ve Pb(II) iyonları kantitatif olarak mini kolonda çok duvarlı karbon nanotüplere adsorlanmış ve ardından 1.0 M HNO3-aseton karışımı ile desorbe edilmiştir. Optimum çalışma koşullarında metal iyonları için geri kazanım değerleri %95'in üzerindedir. 100 mL'lik çözelti kullanılarak elde edilen gözlenebilme sınırı değerleri, Fe(III) için 4.9 µg/L, Cu(II) için 6.5 µg/L, Mn(II) için 3.5 µg/L ve Pb(II) için 8.0 µg/L'dir. En yüksek önderiştirme faktörü 20 olarak bulunmuştur. Önerilen önderiştirme yönteminin kesinliği bağıl standart sapma cinsinden değerlendirilmiş olup 0.8 µg/mL Fe(III), Cu(II), Mn(II) için sırasıyla %1.5 (n=10), %1.6 (n=10), %2.2 (n=10), ve 1.6 µg/mL Pb(II) için %1.5 (n=10)'tir. Yöntem, içme suyu ve musluk suyu örneklerinde Fe(III), Cu(II), Mn(II) ve Pb(II) tayini için uygulanmıştır. Yöntemin doğruluğunu belirlemek için geliştirilen yöntem standart referans maddelere uygulanmıştır. Fe(III), Mn(II) ve Pb(II) iyonları için sertifika değerleri ile deneysel olarak elde edilen değerler arasında belirli bir fark olmadığı gözlenmiştir. Metal iyonları ve karbon nano tüplerin etkileşimleri Langmuir, Freundlich and Dubinin-Radushkevich izotermleri ile karakterize edilmiştir.

Özet (Çeviri)

In this study a simple separation and preconcentration method has been developed for the flame atomic absorption spectrometric determination of trace amounts of Fe(III), Cu(II), Mn(II), and Pb(II) ions. For this purpose, multi walled carbon nanotubes (MWNTs) was packed in a minicolumn and used as solid sorbent. The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Cu(II), Mn(II), Fe(III) and Pb(II) could be quantitatively sorbed on the minicolumn containing carbon nanotubes in the range of pH 8.0?10.0, and then eluted completely with 1.0 M HNO3 and acetone mixture. The recoveries for the metal ions under the optimum working conditions were higher than 95%. The detection limits of 4.9 µg/L for Fe(III), 6.5 µg/L for Cu(II), 3.5 µg/L for Mn(II) and 8.0 µg/L for Pb(II) were obtained using 100 mL of solution. The highest preconcentration factor was found to be 20. The precision of the proposed preconcentration method was evaluated by using 0.8 µg/mL Fe(III), Cu(II) and Mn(II) standard solutions, yielding RSD values of 1.5% (n=10), 1.6% (n=10), 2.2% (n=10) respectively and 1.6 µg/mL Pb(II) standard solution, yielding RSD of 1.5% (n=10). The method was applied to the determination of Fe(III), Cu(II), Mn(II) and Pb(II) in drinking and tap water samples. The validation of the procedure was carried out by analysis of certified reference materials. It was found that there is no significant difference between achieved results and the certified values for Mn(II), Fe(III) and Pb(II) ions. Interaction of metal ions and carbon nanotubes has been characterized by Langmuir, Freundlich and Dubinin-Radushkevich isotherms.

Benzer Tezler

  1. Katı faz ekstraksiyonu ve birlikte çöktürme ile bazı metal iyonlarının zenginleştirilmesi ve türlendirmesi

    Enrichment and speciation of some metal ions by solid phase extraction and coprecipitation

    KADRİYE ÖZLEM SAYGI

    Doktora

    Türkçe

    Türkçe

    2010

    KimyaGaziosmanpaşa Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. MUSTAFA TÜZEN

  2. Karbon nanotüpler kullanılarak bazı metal iyonlarının önderiştirilmesi

    Preconcentration of some metal ions using the nanotubes

    İPEK MURAT

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    KimyaErciyes Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. MUSTAFA SOYLAK

  3. Schiff bazları-çok duvarlı karbon nanotüpler kullanarak ağır metal iyonlarının zenginleştirilmesi

    Enrichment of heavy metal ions using multi walled carbon nanotubes-schiff bases

    SELDA DOĞAN ÇALHAN

    Doktora

    Türkçe

    Türkçe

    2015

    KimyaMersin Üniversitesi

    Analitik Kimya Ana Bilim Dalı

    DOÇ. DR. NAZLI DİNÇER KAYA

  4. Investigation of the effect of porosity in SnO2 nanofibers as anode materials for sodium-ion batteries

    Sodyum-iyon pilleri için SnO2 nanolif anot malzemesinde porozitenin etkisinin incelenmesi

    ERÇİN ÇAĞAN DURAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Enerjiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HÜSEYİN KIZIL

  5. Oksijen ve flor katkılı yeşil floresans yayan grafitik karbon nitrür kuantum noktalarının sentez ve karakterızasyonu: Sensör ve fotokatalitik uygulamaları

    Synthesis and characterization of oxygen and fluorine co-doped green fluorescence graphitic carbon nitride quantum dots: Sensor and photocatalytic applications

    SOLOMON BEZABEH KASSA

    Doktora

    Türkçe

    Türkçe

    2022

    KimyaAtatürk Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. YAVUZ ONGANER