Yüzey aktif madde varlığında politiyofen/kitosan kompozitlerinin kimyasal sentezi ve özelliklerinin incelenmesi
Chemical synthesis of polythiophene/chitosan composite in the presence of surfactant and investigation of properties
- Tez No: 283791
- Danışmanlar: DOÇ. DR. AYŞEGÜL UYGUN
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: Süleyman Demirel Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 102
Özet
Bu çalışmada, politiyofen (PT) homopolimeri, Politiyofen/Kitosan (PT/Ch) ve Politiyofen/Kitosan/Antrakinon-2-sülfonik asit sodyum tuzu (PT/Ch/ACS) kompozitleri kimyasal polimerleşme yöntemi ile sentezlendi. Kimyasal sentezlerde yükseltgen olarak FeCl3 tuzu kullanıldı ve yükseltgen tuz/monomer mol oranı 2,3 olarak alındı. PT/Ch kompozitlerinde kitosan oranı değiştirildi ve kompozitlerin özellikleri incelendi. PT/Ch/ACS kompozitlerinde ise hem Ch hem de ACS oranı değiştirilerek kompozitlerin özellikleri karşılaştırıldı. Sentezlenen kompozitlerin yapıları FTIR ile aydınlatıldı. İletkenlik özellikleri dört-nokta ölçümleri ile, termal özellikleri termogravimetrik analizleri (TGA) ile, yüzey morfolojileri taramalı elektron mikroskobu (SEM) ile, kristal özellikleri ise X-ışını kırınımı (XRD) ile incelendi. Kompozitlerde değişen kitosan ve yüzey aktif madde oranlarında farklı özellikler elde edildi. PT/Ch kompozitlerinde en yüksek iletkenlik 9,62x10-3 S/cm değeri ile PT/Ch(20 mL) kompozitinde elde edildi. PT/Ch/ACS kompozitlerinde değişen ACS oranlarında en yüksek iletkenlik ve termal kararlılık değerleri 2,69x10-4 S/cm ve 219°C ile 10/1 yüzey aktif oranında elde edildi. Yüzey aktif oranı 10/1 değerinde sabit tutularak, PT/Ch/ACS kompozitlerinde Ch oranı değiştirildiğinde en yüksek iletkenliğin ve termal kararlılığın 3,49x10-4 S/cm ve 223°C ile yine 20 mL Ch içeren yapıda olduğu görüldü.
Özet (Çeviri)
In this study, polythiophene(PT) homopolymer, Polythiophene/Chitosan (PT/Ch) composite and Polythiophene/Chitosan/Antraquinone-2-sulfonic acid sodium salt (PT/Ch/ACS) composites were synthesized by chemical polymerization method. FeCl3 was used as oxidant in the chemical synthesis and the ratio of oxidant to monomer was taken as 2.3. Amount of chitosan in the PT/Ch composites was changed and their properties were investigated. For PT/Ch/ACS composites, both Ch and ACS ratio were changed and their properties were compared. Structures of synthesized composites were clarified by FTIR. Conductivity, thermal, surfaces and crystallinity properties of the composites were investigated by four-probe, thermogravimetry (TGA), scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Different properties in the composites were obtained with changing Ch and ACS amounts. In PT/Ch composites, the highest conductivity was obtained for PT/Ch(20 mL) as 9.62x10-3 S/cm. In PT/Ch/ACS composites, the highest conductivity and thermal stability values were obtained in ratio 10/1 as 2.69x10-4 S/cm and 219°C with changing ACS amounts, respectively. At the constant surfactant ratio (10/1), the highest conductivity and thermal stability values of Ch PT/Ch/ACS composites were observed as 3.49x10-4 S/cm and 223°C with changing Ch amounts, respectively.
Benzer Tezler
- Nanoyapılı iletken polimerlerin hazırlanması ve optik özelliklerinin incelenmesi
Preparation of nanostructured conductive polymers and investigation of their optical properties
SEDA POLAT
Yüksek Lisans
Türkçe
2012
Kimyaİstanbul ÜniversitesiFizikokimya Ana Bilim Dalı
PROF. DR. AYŞE ZEHRA AROĞUZ
- Farklı malzemeler ile desteklenmiş etkin metal katalizörlerin geliştirilmesi ve alkali sodyum borhidrür çözeltisinden hidrojen üretiminde kullanılması
Development of different material supported effective metal catalysts and using hydrogen generation from alkaly sodium borohydride solution
FERHAT ORHAN BAYDAROĞLU
- Poli (tiyofen-3-boronik asit)'in elektrokinetik, dielektrik, elektroreolojik ve endüstriyel titreşim sönümleme uygulamalarının araştırılması
Investigation of electrokinetic, dielectric, electrorheologic and industrial vibration damping applications of poly(thiophene-3-boronic acid)
ÖMER YUNUS GÜMÜŞ
- Nanoparticles and nanofibers of Poly(Acrylonitrile-co-Itaconic acid)/Polythiophene composites
Poli(Akrilonitril-ko-Itakonik asit)/Politiyofen kompozit yapıların nanopartikül ve nanolifleri
HAVVA BAŞKAN
Yüksek Lisans
İngilizce
2015
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Bölümü
PROF. DR. HALE KARAKAŞ
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- CdS/politiyofen fotoelektrotsentezi ve karakterizasyonu
CdS/polythiophene photoelectrodesynthesis and characterization
DERYA KAYA
Yüksek Lisans
Türkçe
2024
KimyaMersin ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MELTEM KAHYA DÜDÜKCÜ
DR. RUKAN SUNA KARATEKİN