Polimer kompozit yaprak yay tasarımı
Design of polymer composite leaf spring
- Tez No: 294964
- Danışmanlar: DOÇ. DR. REFİK POLAT, YRD. DOÇ. DR. BİRHAN IŞIK
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: Karabük Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 110
Özet
Bu tezde cam elyaf keçe, cam elyaf dokuma, cam elyaf fitil malzemeler, farklı reçine oranlarında bir araya getirilerek el yatırması yöntemiyle polimer kompozit yaprak yay üretilmiştir. Elde edilen farklı polimer kompozit yaprak yaylar, frezede işlenerek belirlenen test numunesi ölçülerine getirilmiştir. Hazırlanan numuneler çentik darbe deneyi, çekme deneyi, basma deneyi, üç nokta eğme deneyi ve sürünme deneylerine tabi tutularak mekanik dayanımları incelenmiş, ayrıca elde edilen polimer kompozit yaprak yaylar sonlu elemanlar yöntemi ile analiz edilmiştir. Çentik darbe ve basma deneylerinden elde edilen sonuçlar istatistik programı ile analiz edilerek, ANOVA tablosu oluşturularak verilerin anlamlılığa bakılmıştır. Elde edilen sonuçlar kıyaslanmış, 0-90° açıya sahip cam dokuma elyafın mekanik olarak dayanımının daha yüksek olduğu ve fiber oranının artması ile mekanik dayanımın arttığı tespit edilmiştir.
Özet (Çeviri)
In this thesis, polymer composite leaf springs were produced by bringing fiber felt, fiber glass textile, fiber glass wick materials in together with different resin rates by hand lay-up method. The obtained different polymer composite leaf springs were brought to the determined test sample size by milling. The mechanical strengths of the prepared samples were examined being subject to notch impact test, tension test, compression test, three point bend test, and creep test, and the obtained polymer composite leaf springs were analyzed using Finite Elements Method (FEM). The obtained results from notch impact and compression tests were analyzed by using statistical program and test results were evaluated in respect to their meaningfulness by the established ANOVA table. The obtained results of tests were compared and it is understood that the fiber glass textile having 0-90° angle is better mechanical properties and is also found that mechanical strength increases in parallel with the increase in fiber rate.
Benzer Tezler
- Kompozit yayların mekanik davranışlarının incelenmesi
An investigation on the mechanical behaviours of composite springs
CEMAL KOÇHAN
Doktora
Türkçe
2016
Makine MühendisliğiDokuz Eylül ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MELİH BELEVİ
- Development of process techniques for composite based leaf spring systems
Kompozit malzeme esaslı yaprak yay sistemlerinin üretim tekniklerinin geliştirilmesi
MEHMET DENİZ GÜNEŞ
Yüksek Lisans
İngilizce
2013
Polimer Bilim ve Teknolojisiİzmir Yüksek Teknoloji EnstitüsüMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. METİN TANOĞLU
DOÇ. DR. OĞUZ ÖZGÜR EĞİLMEZ
- Effects of fiber discontinuity in fiber reinforced polymer matrix composites
Fiber takviyeli polimer matris kompozitlerde fiber süreksizliğinin etkisi
AHMET SÜHA KILIÇOĞLU
Doktora
İngilizce
2024
Makine Mühendisliğiİzmir Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
PROF. DR. METİN TANOĞLU
- Development of ensete fiber based composites and their characterization
Ensete lifi bazlı kompozitlerin geliştirilmesi ve karakterizasyonu
TOLERA ADERIE NEGAWO
Doktora
İngilizce
2021
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALİ KILIÇ
- Sonbahar atığı yapraktan poliüretan üretimi
Polyurethan production from fall leaves
AYŞEGÜL BÜYÜKLİMANLI
Yüksek Lisans
Türkçe
2015
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. OYA ATICI