Geri Dön

Yazılım mühendisliğinde güvenilir yazılım sınamanın temel prensipleri

Fundamental principles of reliable software testing in software engineering

  1. Tez No: 29952
  2. Yazar: METE BENDERLİ
  3. Danışmanlar: YRD. DOÇ. DR. MUSTAFA TÜRSEVER
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1993
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 381

Özet

ABSTRACT: in this study, by examining position of the fundamental principles about reliable software testing in software engineering,scientifiç methods,crıteria and tools reguired to to be taken into consideration for the purpose of specifying the theoretical basics that belong to the interaction betveen the following subjects and software testing have been established; a)main points of concept. requirement and specification analysis, b)design and integration procedures. c)validation, verification, and reliability criterions and limits, d)debugging standarda, e)iraportant factors in quality management, f)maintenance bases. it should be thought that the degree of reliability. set as a target, can only be provided as long as being dependent on the chief basis which is the fact that testing phase will never be able to be abstracted from those other previous and later stages in software life-cycle. The life-cycle, in its main outlines, has to be constructed for each software as follows; a)Requirements Analysis, b)Determination of Specifications. c)Design, d)Implementation, e)TESTİNG,VERIFIÇATION and VALİDATİON, f)Maintenance because the obtainment of software reliability based on reliable software testing in software engineering can be considered to be possible only if ali of the phases in the life-cycle are incorporated into the software production process so that they complement each other.ABSTRACT: in this study, by examining position of the fundamental principles about reliable software testing in software engineering,scientifiç methods,crıteria and tools reguired to to be taken into consideration for the purpose of specifying the theoretical basics that belong to the interaction betveen the following subjects and software testing have been established; a)main points of concept. requirement and specification analysis, b)design and integration procedures. c)validation, verification, and reliability criterions and limits, d)debugging standarda, e)iraportant factors in quality management, f)maintenance bases. it should be thought that the degree of reliability. set as a target, can only be provided as long as being dependent on the chief basis which is the fact that testing phase will never be able to be abstracted from those other previous and later stages in software life-cycle. The life-cycle, in its main outlines, has to be constructed for each software as follows; a)Requirements Analysis, b)Determination of Specifications. c)Design, d)Implementation, e)TESTİNG,VERIFIÇATION and VALİDATİON, f)Maintenance because the obtainment of software reliability based on reliable software testing in software engineering can be considered to be possible only if ali of the phases in the life-cycle are incorporated into the software production process so that they complement each other.

Özet (Çeviri)

ABSTRACT: in this study, by examining position of the fundamental principles about reliable software testing in software engineering,scientifiç methods,crıteria and tools reguired to to be taken into consideration for the purpose of specifying the theoretical basics that belong to the interaction betveen the following subjects and software testing have been established; a)main points of concept. requirement and specification analysis, b)design and integration procedures. c)validation, verification, and reliability criterions and limits, d)debugging standarda, e)iraportant factors in quality management, f)maintenance bases. it should be thought that the degree of reliability. set as a target, can only be provided as long as being dependent on the chief basis which is the fact that testing phase will never be able to be abstracted from those other previous and later stages in software life-cycle. The life-cycle, in its main outlines, has to be constructed for each software as follows; a)Requirements Analysis, b)Determination of Specifications. c)Design, d)Implementation, e)TESTİNG,VERIFIÇATION and VALİDATİON, f)Maintenance because the obtainment of software reliability based on reliable software testing in software engineering can be considered to be possible only if ali of the phases in the life-cycle are incorporated into the software production process so that they complement each other.ABSTRACT: in this study, by examining position of the fundamental principles about reliable software testing in software engineering,scientifiç methods,crıteria and tools reguired to to be taken into consideration for the purpose of specifying the theoretical basics that belong to the interaction betveen the following subjects and software testing have been established; a)main points of concept. requirement and specification analysis, b)design and integration procedures. c)validation, verification, and reliability criterions and limits, d)debugging standarda, e)iraportant factors in quality management, f)maintenance bases. it should be thought that the degree of reliability. set as a target, can only be provided as long as being dependent on the chief basis which is the fact that testing phase will never be able to be abstracted from those other previous and later stages in software life-cycle. The life-cycle, in its main outlines, has to be constructed for each software as follows; a)Requirements Analysis, b)Determination of Specifications. c)Design, d)Implementation, e)TESTİNG,VERIFIÇATION and VALİDATİON, f)Maintenance because the obtainment of software reliability based on reliable software testing in software engineering can be considered to be possible only if ali of the phases in the life-cycle are incorporated into the software production process so that they complement each other.ABSTRACT: in this study, by examining position of the fundamental principles about reliable software testing in software engineering,scientifiç methods,crıteria and tools reguired to to be taken into consideration for the purpose of specifying the theoretical basics that belong to the interaction betveen the following subjects and software testing have been established; a)main points of concept. requirement and specification analysis, b)design and integration procedures. c)validation, verification, and reliability criterions and limits, d)debugging standarda, e)iraportant factors in quality management, f)maintenance bases. it should be thought that the degree of reliability. set as a target, can only be provided as long as being dependent on the chief basis which is the fact that testing phase will never be able to be abstracted from those other previous and later stages in software life-cycle. The life-cycle, in its main outlines, has to be constructed for each software as follows; a)Requirements Analysis, b)Determination of Specifications. c)Design, d)Implementation, e)TESTİNG,VERIFIÇATION and VALİDATİON, f)Maintenance because the obtainment of software reliability based on reliable software testing in software engineering can be considered to be possible only if ali of the phases in the life-cycle are incorporated into the software production process so that they complement each other.

Benzer Tezler

  1. Haliç metro köprüsü sağlık izleme sistemi ve üç boyutlu doğrusal sonlu eleman modeli geliştirilmesi

    Health monitoring system of golden horn metro bridge and development of three dimensional linear finite element model

    ÖMER GALİP PINAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ BARIŞ ERKUŞ

  2. Çok makineli güç sisteminde açısal kararlılık analizi ve kontrolör parametre optimizasyonu

    Angular stability analysis and controller parameter optimization in multi-machine power system

    SERDAR EKİNCİ

    Doktora

    Türkçe

    Türkçe

    2015

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. AYŞEN DEMİRÖREN

  3. Design of a new laminar soil container and its numerical verification for SSI and liquefaction tests

    Yeni bir laminer zemin konteynerinin tasarımı ve SSI ve sıvılaşma testleri için sayısal doğrulaması

    OMID BAGHERI

    Doktora

    İngilizce

    İngilizce

    2024

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ESRA ECE BAYAT

  4. Travel time reliability analysis of urban transportation network in city of Baghdad using probe vehicle

    Başlık çevirisi yok

    MUSTAFA MIMOON HABEEB AL-FATYAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    İnşaat MühendisliğiSakarya Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ HAKAN ASLAN

  5. İnsan performansı güvenilirlik analizi

    Başlık çevirisi yok

    RAMİZ CEPKENLİ

    Doktora

    Türkçe

    Türkçe

    1995

    İşletmeİstanbul Üniversitesi

    PROF.DR. YILMAZ TULUNAY