BSA'nın farklı yüzeylerde adsorpsiyonu ve elektrokinetik özellikleri
Adsorption of BSA on different surfaces and electrokinetics properties
- Tez No: 320663
- Danışmanlar: PROF. DR. TÜRKAN KOPAÇ
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: Türkçe
- Üniversite: Bülent Ecevit Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 239
Özet
Bu çalışmada alüminyum oksit (Al2O3), zirkonyum oksit (ZrO2), tek duvarlı karbon nanotüpler (SWNT), saflık oranı düşük (MWNT(1)) ve yüksek olan çok duvarlı karbon nanotüpler (MWNT(2)), alüminyum oksit-çok duvarlı karbon nanotüp (Al2O3-MWNT(2)) kompoziti, zirkonyum oksit-çok duvarlı karbon nanotüp (ZrO2-MWNT(2)) kompoziti ve poli(Laktid)-poli(etilen glikol)-amin (PLa-PEG-NH2) polimeri gibi farklı özelliklere sahip olan yüzeyler üzerinde bovin serum albümininin (BSA) adsorpsiyonu ile elektrokinetik özellikleri incelenmiştir. Metal oksitlere yeni özellikler kazandırmak, yüzey alanlarını ve protein adsorpsiyon özelliklerini arttırmak amacı ile kimyasal yöntemlerle saflık oranı yüksek olan çok duvarlı karbon nanotüplerle modifikasyonları gerçekleştirilmiştir. Protein adsorpsiyonunun denge ve kinetiğine, pH (4, 5 ve 7.4) ve sıcaklığın (20, 30 ve 40oC) etkileri araştırılmıştır. BSA'nın farklı adsorbentler üzerindeki deneysel denge verilerinin Langmuir ve Freundlich izoterm modelleriyle uyumu incelenmiş ve adsorpsiyon kapasiteleri belirlenmiştir.Tüm adsorbentlerin protein adsorpsiyon kapasitelerinin karşılaştırılması sonucunda kimyasal modifikasyon ile elde edilen Al2O3-MWNT(2) ile ZrO2-MWNT(2) kompozitlerinin yüzey alanlarının ve protein adsorpsiyon kapasitelerinin metal oksitlere göre arttığı görülmüştür. Bununla birlikte, en fazla proteinin diğer adsorbentlere göre yüzey alanı en yüksek olan MWNT(2) tarafından adsorpladığı bulunmuştur. Al2O3, ZrO2, SWNT, MWNT(1), MWNT(2), Al2O3-MWNT(2), ZrO2-MWNT(2) ve PLa-PEG-NH2 üzerine BSA adsorpsiyonunun pH 4, 5 ve 7.4'te 20, 30 ve 40oC sıcaklıklarda deneysel hız verilerinin birinci derece hız kinetiğine uyum sağladığı görülmüştür. BSA'nın adsorbent yüzeyleri ile arasındaki elektrostatik etkileşimlerinin anlaşılması amacıyla zeta potansiyel ölçümleri yapılmıştır. BSA'nın tüm adsorbentler üzerindeki adsorpsiyonuna pH'ın etkisini zeta potansiyel değerleri de desteklemiştir. pH değiştikçe protein ile yüzey arasındaki elektrostatik etkileşimlerin de değiştiği gözlenmiştir. Ayrıca, zeta potansiyel ölçümleri tüm adsorbentler için elde edilen denge verileriyle de uyum sağlamıştır.
Özet (Çeviri)
In this work, the adsorption and the electrokinetic properties of bovine serum albumine (BSA) onto various surfaces having different properties such as aluminium oxide (Al2O3), zirconium oxide (ZrO2), single walled carbon nanotubes (SWNT), low purity (MWNT(1)) and high purity multi walled carbon nanotubes (MWNT(2)), aluminum oxide-multi walled carbon nanotube (Al2O3-MWNT(2)) composites, zirconium oxide-multi walled carbon nanotube (ZrO2-MWNT(2)) composites, and poly(Lactid)-poly(ethylene glycol)-amine (PLa-PEG-NH2) have been investigated. In order to enhance the properties of metal oxides, to increase the specific surface areas and the adsorptive properties, metal oxides were modified with high purity multi walled carbon nanotubes by chemical treatments. The effects of pH (4, 5 and 7.4) and temperature (20, 30 and 40oC) on the equilibrium and kinetics of protein adsorption were investigated. The experimental equilibrium data of BSA obtained for different adsorbents were compared with the Langmuir and the Freundlich isotherm models and the adsorption capacities of adsorbents were determined. As a result of the comparison of the adsorption capacities of all adsorbents, it was found that the surface areas and the protein adsorption capacities of Al2O3-MWNT(2) and ZrO2-MWNT(2) composities were increased according to the metal oxides. On the other hand, it was found that the highest protein adsorption was obtained with the MWNT(2) which has the highest surface area among the other adsorbents. The experimental rate data of adsorption of BSA on Al2O3, ZrO2, SWNT, MWNT(1), MWNT(2), Al2O3-MWNT(2), ZrO2-MWNT(2) and PLa-PEG-NH2 were best fitted with the first order kinetics at 20, 30 and 40oC for pH 4, 5 and 7.4. The zeta potential measurements were done in order to understand the electrostatic interactions of BSA with all the adsorbents. The effects of pH on BSA adsorption were supported by zeta potential results. It was observed that the electrostatic interactions between the BSA and the surfaces were changed with pH. The zeta potential measurements were also in goog agreement with the equilibrium data obtained for all of the adsorbents.
Benzer Tezler
- BIOINTERFACIAL CELL/PROTEIN–POLYMER INTERACTIONS INVESTIGATED BY QUARTZ CRYSTAL MICROBALANCE WITH DISSIPATION
Hücre/protein–polimer biyoarayüzündeki etkileşimlerin disipasyon izlemeli kuvars kristal mikroterazi ile incelenmesi
AYŞE BUSE ÖZDABAK SERT
Doktora
İngilizce
2023
Biyoteknolojiİstanbul Teknik ÜniversitesiMoleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ABDULHALİM KILIÇ
- Polimerik arayüzeylerdeki protein adsorbsiyon kinetiği ve biyofilm oluşumunun ATR-FTIR tekniği ve mikroskopik yöntemlerle incelenmesi
Investigation of protein adsorption kinetics and biofilm formation on polymeric interfaces bf ATR-FTIR and microscopic techniques
ARZU PEŞMEN
Yüksek Lisans
Türkçe
1994
Kimya MühendisliğiHacettepe ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. MENEMŞE KİREMİTÇİ
- Yüzey modifiye monodispers mikrokürelerin üretimi ve protein adsorpsiyonunda kullanılması
Başlık çevirisi yok
MİNE ABDELAZİZ
- Beyin-omurilik sıvısı şantlarında bakteriyel kolonizasyonun önlenmesi
Preventation of bacterial colonization on cerebrospinal fluid shunts
EBRU AKDOĞAN
Doktora
Türkçe
2010
BiyomühendislikHacettepe ÜniversitesiBiyomühendislik Ana Bilim Dalı
PROF. DR. MEHMET MUTLU
- Sıcaklık duyarlı polimer fırçalar ile modifiye edilmiş 3-boyutlu altın nanoçubuk platformlar üzerinde sıcak nokta mühendisliği
Hotspot engineering on modified 3-D gold nanorod platforms through temperature responsive polymer brushes
KÜBRA ÖZKAN HÜKÜM