Doğrusal ve doğrusal olmayan kafes sistemlerin genetik algoritma ile optimum tasarımı
Optimum design of linear and nonlinear truss systems using genetic algorithm
- Tez No: 324612
- Danışmanlar: PROF. DR. AYŞE DALOĞLU
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2013
- Dil: Türkçe
- Üniversite: Karadeniz Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 75
Özet
Bu çalışmada güncel optimizasyon yöntemlerinden biri olan Genetik Algoritma ile doğrusal olarak çözülmüş düzlem ve uzay kafes sistemlerin minimum ağırlıklı olarak boyutlandırılması yapılmıştır. Ayrıca, geometrik bakımdan doğrusal olmayan sistemleri gerçeğe daha yakın temsil eden ardışık yaklaşım yöntemiyle doğrusal olmayan şekilde analiz edilmiş düzlem ve uzay kafes sistemlerin minimum ağırlıklı olarak boyutlandırılması da gerçekleştirilmiştir.Doğrusal sonlu elmanlar yönteminin ve ardışık yaklaşım metodunun matematiksel tanımı verilmiş ve bu yöntemlerin Genetik Algoritma (GA) ile minimum ağırlıklı tasarımda kullanılması matlab dilinde yazılan programla sağlanmıştır.Doğrusal ve doğrusal olmayan analiz sonuçları kullanılarak optimizasyonu gerçekleştirilen sistemlerin optimizasyon sonuçlarında farklılıklar olup olmadığı incelenmiş ve oluşan farklılıkların sebepleri belirlenmiştir. Ayrıca ulaşılan sonuçların literatürden elde edilenlerle karşılaştırması yapılmıştır.Doğrusal ve doğrusal olmayan analiz kullanılarak optimizasyonu yapılan sistemlerde, optimizasyon sonuçlarının neredeyse aynı olduğu, oluşan farklılıkların ise oldukça küçük değişiklikler şeklinde meydana gelip, sınır durumda bulunan doğrusal analizle optimizasyon sonuçlarının bir üst kesite taşınması gerekliliğini ortaya çıkartmıştır.
Özet (Çeviri)
Master ThesisIn this study; genetic algorithms is used to perform optimum design of plane and space truss systems for minimum weight. Besides geometrically nonlinear behavior of the plane and space truss systems are considered using a successive iterative technique to represent the behavior of the system better in the optimum design of the truss structures.The explanation for the finite element method and successive iteration technique is given and also application of Genetic Algorithm along with these methods to perform the optimum design of truss structures are shown by coding a computer program in Matlab.The comparison is made to figure out the possible differences between the results obtained from the optimum design of linear and nonlinear design of the truss systems. The reasons of the possible differences are searched and results obtained in the study are also compared with the ones evaluated by other researchers from the literature.It is seen that the optimum results using linear and nonlinear analysis are usually almost the same, and the differences are very small. It is also observed that it is necessary to go to an upper section if the section is on the limit when the linear analysis is used.
Benzer Tezler
- Detection of Legionella pneumophila using metal-organic framework-808-EDTA in electrochemical immunosensors
Elektrokimyasal immünosensörlerde metal-organik kafes-808-EDTA kullanılarak Legıonella pneumophila tespiti
CANAN BUSE ABDÜL
Yüksek Lisans
İngilizce
2024
Biyomühendislikİstanbul Teknik ÜniversitesiMoleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ABDULHALİM KILIÇ
DOÇ. DR. İLKE GÜROL
- Viskoelastik malzemeler için geliştirilmiş bir gerilme?şekil değiştirme?zaman ilişkisinin cam elyaf takviyeli plastik çubuk sistemlere uygulanması
Application of a developed stress?strain?time relationship for viscoelastic materials on glass fiber reinforced plastic bar systems
MUTLU SEÇER
Doktora
Türkçe
2010
İnşaat MühendisliğiDokuz Eylül Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET EMİN KURAL
- Doğrusal olmayan bazı sistemlerin incelenmesi
Study of some nonlinear systems
ATİLLA ÇİFCİ
Yüksek Lisans
Türkçe
2004
Fizik ve Fizik MühendisliğiYıldız Teknik ÜniversitesiFizik Ana Bilim Dalı
PROF.DR. HASAN TATLIPINAR
- Performance of space steel structure under fire
Uzay çelik yapıların yangın altındaki performansı
ENOCK TUYISHIME
Yüksek Lisans
İngilizce
2022
İnşaat MühendisliğiBursa Uludağ Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. HAKAN TACATTİN TÜRKER
- Coding schemes for energy harvesting and multi-user communications
Enerji hasadı yapılan ve çok-kullanıcılı haberleşme sistemleri için kodlama yöntemleri
MEHDI DABIRNIA
Doktora
İngilizce
2017
Elektrik ve Elektronik Mühendisliğiİhsan Doğramacı Bilkent ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. TOLGA METE DUMAN