Au(III) tayini için polimer esaslı optik sensör geliştirilmesi
Polymer based optical sensor for determination of Au(III)
- Tez No: 343500
- Danışmanlar: DOÇ. DR. ECE KÖK YETİMOĞLU, ÖĞR. GÖR. SONER ÇUBUK
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Analitik Kimya Bilim Dalı
- Sayfa Sayısı: 48
Özet
Soy metaller, özellikle altın, çoğunlukla mücevher, katalizör, yakıt pilleri ve biyomedikal materyallerde kullanılır. Bununla birlikte su sistemleri ve toprak sıklıkla bu maddeler sebebiyle kirlenebilir. Bundan dolayı çeşitli matrislerdeki yüksek hassasiyeti ve seçiciliği olan altın analizi yöntemleri geliştirmek çok önemlidir. Literatürde Au(III) analizi için birçok spektrofotometrik ve spektorfluorimetrik yöntemler, indüktif eşleşmiş plazma kütle spektrometrisi, atomik absorpsiyon spektormetrisi içeren çeşitli yöntemler bulunmaktadır. Ancak bu yöntemlerin çoğu pahalı cihazlara ihtiyaç duyması, birtakım girişimlerle karşı karşıya olması, zaman alması gibi çeşitli dezavantajlara sahiptir. Son yıllarda çevresel, jeolojik ve metalürjik alanlardaki Au(III) iyonunun tayini için düşük tespit sınırları, hassasiyet ve cevap süreleri sebebiyle fluoresans sensörlerin önemi artmıştır. Çalışmamızda Au (III) belirlenmesi için ışıkla sertleştirilmiş tiyol-ene polimerik membran temelli hassas ve seçici yeni bir fluoresans sensör geliştirilmiş ve ilk kez sunulmuştur. Cevap süresi, pH etkisi, dinamik doğrusal aralık, hassasiyet, tespit sınırı, yeniden kullanılabilirlik gibi performans kriterleri sistematik olarak incelenmiştir. Membranın fluoresans spektrumu uyarma/ emisyon maksimumu sırasıyla 379 nm / 425 nm olarak görülmektedir. Yaklaşık cevap süresi 0,5 dakika olarak ölçülmüştür. Ayrıca sensör, çok düşük tespit sınırına sahip olup, 1,09 µg L-1, bu değer literatürdeki diğer fluoresans sensör metotlarından çok daha düşüktür.
Özet (Çeviri)
Noble metals, especially gold, are widely used in jewelry, catalysts, fuel cells and biomedical materials. However, contamination of water systems and soil may occur due to frequent use of these substances. Hence, it is crucial to develop highly sensitive and selective gold analysis methods in various matrices. Miscellaneous methods have been adopted in the literature for the Au(III) analysis including atomic absorption spectrometry, inductively coupled plasma mass spectrometry, various spectrophotometric and spectrofluorimetric methods. However, most of these methods have various disadvantages such as time consuming, subject to a number of interferences, and requiring expensive instruments. In recent years, fluorescent sensors have been increasingly becoming important due to their low detection limits, sensitivity, and response time for the determination of Au(III) ions in environmental, geological and metallurgical, and technological fields. In our study, development of a novel sensitive and selective optical fluorescence sensor based on photocured thiol-ene polymeric membrane for Au(III) determination has been described and reported for the first time. The performance criteria such as response time, effect of pH, dynamic linear range, sensitivity, limit of detection, reusability were systematically investigated. Fluorescence spectra showed that the excitation/emission maxima of the membrane were at 379/ 425 nm, respectively. The approximate response time was measured as 0.5 min. In addition sensor had a very low limit of detection which was 1.9 µg L-1 which is lower than the other fluorescent sensor methods reported in the literature.
Benzer Tezler
- Development of metal and/or metal-oxide modified polymer and carbon based composite electrodes for electrochemical reduction of carbon dioxide and determination of antimony in real samples
Karbondioksidin elektrokimyasal indirgenmesi ve gerçek örneklerde antimon tayini için metal ve/veya metal oksit modifiye polimer ve karbon bazlı kompozit elektrotların geliştirilmesi
ŞEBNEM GÜL İLARSLAN
- Altın( III), gümüş(I) ve rodyum(III) iyonlarının poli(2-aminotiyofenol) polimeri ile adsorpsiyonu ve seçiciliğinin incelenmesi
Investigating the selectivity and adsorption of gold(III), silver(I) and rhodium(III) ions with poly(2-aminothiophenol) chelating polymer
ÜMİT CAN ERİM
- 1,3,5 triazin-tetraetilen pentamin polimeri ile Cu(II) iyonlarının katı faz ekstraksiyonundan sonra çeşitli sebzelerde faas ile tayini
Determination of Cu(II) levels in various vegetables by faas after solid phase extraction using 1,3,5 triazine-tetraethylene pentamine polymer
HANDE NUR BEYZA ŞAĞBAN
- The design and synthesis of fluorescent chemosensors for the detection of gold and mercury metal species
Altın ve cıva metal bileşiklerinin tayin edilmesi için floresan özellikte kemosensörlerin tasarlanması ve sentezlenmesi
CEREN CANTÜRK
Yüksek Lisans
İngilizce
2015
Kimyaİzmir Yüksek Teknoloji EnstitüsüKimya Ana Bilim Dalı
DOÇ. DR. MUSTAFA EMRULLAHOĞLU
- Değerli metal iyonlarının önderiştirilmesi ve atomik absorpsiyon spektroskopisi ile tayinleri
Preconcentration of precious metal ions and their determinations with atomic absorption spectrometry
TUBA ARSLAN