Geri Dön

E^3 de sabit açılı yüzey ailesi

Constant angle surface family in e^3

  1. Tez No: 348428
  2. Yazar: SEDAT KAHYAOĞLU
  3. Danışmanlar: PROF. DR. EMİN KASAP
  4. Tez Türü: Doktora
  5. Konular: Matematik, Mathematics
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Ondokuz Mayıs Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Matematik Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 89

Özet

Bu tezde, 3-boyutlu Öklid uzayında verilen bir eğriden geçen ve her bir üyesinin birim normali belirli bir doğrultu ile sabit açı yapan yüzey ailesi problemi çalışılmıştır. Belirli doğrultu birim vektör olarak alınmıştır. Bu birim vektörün verilen eğrinin Frenet çatısındaki ifadesi bulunup, eğrinin bazı özel durumları için sonuçlar elde edilmiştir. Yüzey ailesinin geçtiği eğri izoparametrik eğri olarak alınıp yüzeyin parametrik gösterimi bu eğrinin Frenet çatısı ile ifade edilereksabit açılı yüzeyin birim normalinin özellikleri bulunmuştur. Bunların yardımı ile sabit açılı yüzey için gerek ve yeter koşullar elde edilmiştir. Böylece sabit açılı yüzey ailesinin parametrik ifadesine ulaşılmıştır. Son olarak farklı eğriler ve doğrultular için yüzey ailesi örnekleri alınıp bu ailelerin bazı üyeleri şekiller ile gösterilmiştir.

Özet (Çeviri)

In this thesis, problem of constant angle surface family which passing through a given curve and every members unit normals makes constant angle with a fixed direction was studied on 3-dimension Euclidean space. A unit vector is utilitized fixed direction. The presentation of this unit vectoris found on Frenet frame of given curve, than conclusions is derived for some specific situation of the curve. By representing the surface parametrically depending on the Frenet frame of the curve, properties of the unit normal of the constant angle surface are obtained with considering the curve, which the surface family posses through, is an isoparametric curve. With the help of these necessary and sufficient conditions are obtained for constant angle surface. Thus, theparametric representing of the family of constantangle surface has been reached. Finally, constant angle surface family samples is taken with some members of these families are shown by figures for different curves and directions.

Benzer Tezler

  1. Yarı Öklid uzaylarının genelleştirilmiş sabit oran alt manifoldları

    Generalized constant ratio submanifolds of semi-Euclidean spaces

    ALEV KELLECİ

    Doktora

    Türkçe

    Türkçe

    2018

    MatematikFırat Üniversitesi

    Geometri Ana Bilim Dalı

    PROF. DR. MAHMUT ERGÜT

    DOÇ. DR. NURETTİN CENK TURGAY

  2. Il^n de Joachimsthal teoremi üzerine

    On the Joachimsthal theorem in the Lorentz space Il^n

    ÖNDER ŞENER

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    MatematikOndokuz Mayıs Üniversitesi

    Matematik Ana Bilim Dalı

    DOÇ. DR. AYHAN TUTAR

  3. Bazı özel sabit sırt uzaklıklı yüzeyler

    Some special surfaces at a constant distance from the edge of regression

    ALİ ÇAKMAK

    Doktora

    Türkçe

    Türkçe

    2015

    MatematikAtatürk Üniversitesi

    Matematik Ana Bilim Dalı

    DOÇ. DR. ÖMER TARAKCI

  4. 〖IL〗^3 Lorentz uzayında space-like eğriler için Joachimsthal Teoremi

    In 〖IL〗^3 Lorentz space Joachimsthal Theorem for the space-like curves

    ZEKİYE YILMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    MatematikOndokuz Mayıs Üniversitesi

    Matematik Ana Bilim Dalı

    PROF. DR. AYHAN TUTAR

  5. Weingarten yüzeyleri üzerine

    On Weingarten surfaces

    ÖZGÜR KALKAN

    Doktora

    Türkçe

    Türkçe

    2010

    MatematikAfyon Kocatepe Üniversitesi

    Matematik Ana Bilim Dalı

    PROF. DR. RAFAEL LOPEZ

    YRD. DOÇ. DR. DERYA SAĞLAM