Geri Dön

Fourier dönüşümü ile sayısal faz hologramının elde edilmesi

The reconstruction of the digital phase hologram by using fourier transform

  1. Tez No: 355397
  2. Yazar: GÜLHAN USTABAŞ KAYA
  3. Danışmanlar: DOÇ. DR. ZEHRA SARAÇ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Bülent Ecevit Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 94

Özet

Fourier Dönüşümü ile sayısal faz hologramının elde edilmesi amaçlanan bu çalışmada, bulunan faz bilgisi kullanılarak cismin görüntüsü tekrar geri elde edilmiştir. Tek bir faz hologramı yaratmak için kullanılacak faz bilgisi, daha önce optik profilometri için kullanılan fakat bu çalışmada hologramdan faz bilgisini çıkartmak için kullanılması önerilen Fourier dönüşüm algoritması ile bulunmuştur. Çalışmada ilk olarak sayısal ortamda tek bir hologram oluşturulmuştur. Oluşturulan hologramın, bu çalışmada kullanılması önerilen Fourier dönüşüm algoritması ile bulunan faz bilgisinden tek bir faz hologramı yaratılmıştır. Yaratılan faz hologramından sırasıyla ters Fourier dönüşümü ve Fresnel-Kirchhoff integrali kullanılarak görüntünün yeniden elde edilmesi (reconstruction) işlemi gerçekleştirilmiştir. İkinci olarak faz kaydırma sayısal holografi tekniği kullanılarak 4 farklı hologram oluşturulmuştur. Fakat bu yöntemde faz bilgisi bulunurken sadece çalışmada önerilen Fourier dönüşüm algoritması kullanılmamış, faz kaydırma sayısal holografi tekniği ile de faz bilgisi elde edilmiştir. Faz kaydırma sayısal holografi tekniği ile faz bulma yöntemi daha önceden gerçekleştirilmiş olup bu çalışmada önerilen Fourier dönüşüm algoritması yöntemi ile karşılaştırma yapabilmek için tekrar kullanılmıştır. Sırasıyla her iki yöntemle elde edilen faz bilgileri ile genliği bir olan bir faz hologramı yaratılmış ve bu hologram alanından görüntünün yeniden elde edilmesi işlemi Fresnel-Kirchhoff integrali kullanılarak gerçekleştirilmiştir. Çalışmanın son aşamasında deneysel düzenekte hologram çekimi yapılmış cisimlerin, çalışmada önerilen Fourier dönüşüm algoritması ile bulunan faz bilgisinden ters Fourier dönüşümü kullanılarak görüntüleri geri elde edilmiştir.

Özet (Çeviri)

The reconstruction of the digital phase hologram by using Fourier transform is purposed in this thesis, the reconstruction process is carried out with the phase information which is obtained from a hologram The phase information which is used for creating the single phase hologram is obtained by using Fourier transform algorithm which has been previously used for optical profilometry but is proposed to use in this study for obtaining phase information from the hologram. In this study the single hologram is firstly created digitally. The single phase hologram is created for phase information obtaining by Fourier transform algorithm which is proposed in this study. By using inverse Fourier Transform and Fresnel-Kirchhoff integral respectively, the reconstruction process is performed by the phase information obtaining from a single hologram. Secondly, 4 different holograms is obtained using by phase shifting digital holography technique. But in this method, while obtaining the phase information, not only using Fourier transform algorithm proposing in this study, but also the phase information is obtained by using phase shifting digital holography technique. Obtaining phase information method by using phase shifting digital holography techniqe which has been previously performed, is used for making comparison with Fourier transform algorithm proposing in this study. The phase hologram having one amplitude is created by using phase information which is obtained from these two methods respectively and the reconstruction process is performed by using Fresnel-Kirchhoff integral. In the last step of this study, the image of 3D object that we have taken a digital hologram experimentally, is reconctructed by inverse Fourier transform from phase information by obtaining Fourier transform algorithm which is proposed to use in this study.

Benzer Tezler

  1. 3-boyutlu bir cismin sayısal hologramından uzaysal ışık modülatörü kullanılarak optiksel holografik görüntüsünün elde edilmesi

    Optical reconstruction of three dimensional from digital hologram by using spatial light modulator

    DUYGU ÖNAL TAYYAR

    Doktora

    Türkçe

    Türkçe

    2013

    Fizik ve Fizik MühendisliğiGebze Yüksek Teknoloji Enstitüsü

    Fizik Ana Bilim Dalı

    PROF. DR. FEVZİ NECATİ ECEVİT

  2. Design and implementation of a dynamic laser beam shaping system

    Dinamik lazer hüzme şekillendirme sisteminin tasarım ve uygulaması

    DINA YAQOOB MATTI ALSAKA

    Doktora

    İngilizce

    İngilizce

    2018

    Elektrik ve Elektronik MühendisliğiÇankaya Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ SERAP ALTAY ARPALİ

    DR. ÖĞR. ÜYESİ ÇAĞLAR ARPALİ

  3. Dalga formu modellemesi ile Orta-Batı Anadolu kabuk yapısının incelenmesi

    Investigation of the structure of the crust in Mid-Western Anatolia using waveform modelling

    NİYAZİ ELTEZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Jeofizik MühendisliğiÇanakkale Onsekiz Mart Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. TOLGA BEKLER

  4. Vortex induced oscillations of an elastically mounte circular cylinder

    Başlık çevirisi yok

    OKŞAN ÇETİNER

    Yüksek Lisans

    İngilizce

    İngilizce

    1995

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    PROF. DR. M. FEVZİ ÜNAL