Geri Dön

Dynamic simulation and control of a multi purpose chemical plant

Başlık çevirisi mevcut değil.

  1. Tez No: 364288
  2. Yazar: ŞÜKRÜ UĞUR AKMAN
  3. Danışmanlar: DOÇ. DR. ÖNER HORTAÇSU, DOÇ. DR. AMABLE HORTAÇSU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1987
  8. Dil: İngilizce
  9. Üniversite: Boğaziçi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 263

Özet

Özet yok.

Özet (Çeviri)

The aim of this work is to investigate the dynamic behaviour of a typical multi-purpose chemical plant under various control structures. The mathematical models for the processing units of this typical chemical plant are developed. These models include as many as possible of the effects present in chemical plants. Therefore a continuous stirred tank reactor, a separation step (distillation), a heat exchanger, mixing tanks and recycle stream , " ... ' ; were included in the model chemical plant. The m~thematical models are focused on the control objectives and needs of each individual unit independently,· and then the model control structures are integrated for the control of the compelete plant. During the integration of modal control structures overspecifications (conflicts) between the control loops are eliminated by the use ofa systematic procedure. A computer program is developed to solve the differential and ~gebraic equations resulting from the mathematical modeling, and alternative flowsheets, with their control structures, for the model plant are simulated by this' computer program. From the simulation results it was concluded that.~he suggested control structures for the plant fulfill the operational objectives of the plant. Furthemmore, it was shown that this results was obtained upon the use of the systematic procedure used for total plant control to avoid ov~ specifications among the control loops of the plant.

Benzer Tezler

  1. Esnek üretim sistemleri için bir etkin üretim denetleme modeli

    An Effective supervisory control model for flexible manufacturing systems

    BAHAR KORKUSUZ

  2. Performance analysis of a controlled multi-purpose chemical plant

    Başlık çevirisi yok

    ALP ER ŞEVKİ KONUKMAN

    Yüksek Lisans

    İngilizce

    İngilizce

    1989

    Kimya MühendisliğiBoğaziçi Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖNER HORTAÇSU

    DOÇ. DR. AMABLE HORTAÇSU

  3. İki ardışık reaksiyon içeren tek ve çift reaktif bölgeli reaktif distilasyon kolonlarının kontrolü

    Control of reactive distillation columns with single and double reactive sections for two stage consecutive reactions

    İLAYDA NUR OKSAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DEVRİM BARIŞ KAYMAK

  4. Investigation of bluff-body stabilized premixed flame dynamics using an in-house flow solver lestr3d

    Küt cisim ile stabiılize edilmiş ön karışımlı alev dinamiklerinin özgün akış çözücüsü lestr3d ile incelenmesi

    BURAKHAN ŞÜKÜROĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Havacılık Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYŞE GÜL GÜNGÖR

  5. Mikro hava araçlarının bilinmeyen ortamlarda görüntü temelli kontrolü

    Vision based control of micro air vehicles in unknown environments

    CİHAT BORA YİĞİT

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Mekatronik Mühendisliğiİstanbul Teknik Üniversitesi

    Mekatronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ERDİNÇ ALTUĞ