Geri Dön

Modeling of turbulent, swirling flow confined coaxial jet configuration

Başlık çevirisi mevcut değil.

  1. Tez No: 364514
  2. Yazar: EZGİ YİĞİTLER
  3. Danışmanlar: DOÇ. DR. ORHAN YENİGÜN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Çevre Mühendisliği, Environmental Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1995
  8. Dil: İngilizce
  9. Üniversite: Boğaziçi Üniversitesi
  10. Enstitü: Çevre Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Çevre Teknolojileri Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 82

Özet

Özet yok.

Özet (Çeviri)

A finite volume code that uses the STh-fPLEC algorithm to solve pressure-velocity coupling has been developed for cylindrical combustor geometries as an aid to reduced pollutant emission design and operation of combustion systems. The method involves a staggered grid system for axial and radial velocities, a line relaxation technique for efficient solution of the equations, and standard k-£ turbulence model. The code is used to predict turbulent swirling gas velocity field in confined coaxial jet configuration and the gas flow within the combustor is assumed to be steady-state, axisymmetric, non-reacting, isothermal and incompressible. The predictions are compared with an experimental and a previous numerical study. The mean velocity profile predictions of the present study are in good agreement with the experimental results, and are better than the numerical study which uses the same turbulence modeL The turbulent kinetic energy of the gas, however, is underpredicted by this turbulence model, especially in the inner mixing region of the two jets. The reasons for the discrepancies and the consequential value of the calculation method are discussed.

Benzer Tezler

  1. Modeling gas turbine compustion chambers

    Gaz türbini yanma odalarının modellemesi

    OSMAN KİPOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2001

    Makine MühendisliğiMarmara Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ZAFER GÜL

  2. Modeling of multi-phase combustion processes

    Çok fazlı yanma olaylarının modellenmesi

    RAMZİ (REMZİ) JUDEH (ŞAHİN)

    Doktora

    İngilizce

    İngilizce

    2001

    Makine MühendisliğiOrta Doğu Teknik Üniversitesi

    PROF.DR. HÜSEYİN VURAL

  3. Numerical modelling of cyclone separators laminar swirling flow

    Başlık çevirisi yok

    KAYHAN YİĞİTLER

    Yüksek Lisans

    İngilizce

    İngilizce

    1995

    Makine MühendisliğiBoğaziçi Üniversitesi

    Y.DOÇ.DR. HALUK ÖRS

  4. Bir benzinli motorun türbülanslı akış alanlarının incelenmesi

    The Investigation of the turblent flow fields in the motored S.1. engine

    AHMET ERDİL

    Doktora

    Türkçe

    Türkçe

    1997

    Uçak Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak Mühendisliği Ana Bilim Dalı

    PROF. DR. OĞUZ BORAT

  5. Gaz-partikül iki fazlı girdaplı akışların matematik modellenmesi ve sayısal çözümü

    Mathematical modelling and numerical solution of gas-particle two phase swirling flow

    MEHMET TEKE

    Yüksek Lisans

    Türkçe

    Türkçe

    2010

    Makine MühendisliğiUludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. İRFAN KARAGÖZ