Geri Dön

Soğuk bağlama yöntemi ile elde edilen yapay agregalar ile taşıyıcı hafif beton üretimi ve mekanik özelliklerinin incelenmesi

Production and investigating mechanical properties of structural lightweight concrete with artificial aggregates made by cold bonding method

  1. Tez No: 387580
  2. Yazar: HAKAN KOMAN
  3. Danışmanlar: YRD. DOÇ. DR. ERKAN KANTAR
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: uçucu kül, silis dumanı, taşıyıcı hafif beton, soğuk bağlama yöntemi, yüksek fırın cürufu, yapay agrega, strux 90/40 fiber donatı, fly ash, silica fume, structural lightweight concrete, cold bonding method, GGBS, artificial aggregates, strux 90/40 fibres
  7. Yıl: 2015
  8. Dil: Türkçe
  9. Üniversite: Celal Bayar Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Yapı Fiziği ve Malzemesi Bilim Dalı
  13. Sayfa Sayısı: 79

Özet

Beton en geniş kullanım olanağına sahip yapı malzemesidir. Dayanımını önemli derecede düşürmeden betonu hafifleştirmek, Newton'ın F=ma ilkesi gereği, depreme dayanıklı yapı tasarımında çığır açılmasına neden olacak ve taşıyıcı hafif beton geleceğin belki de en önemli yapı malzemesi olacaktır. Türkiye'de ve dünyada, demir çelik endüstrisi ve kömürle elektrik üreten termik santrallerin artık maddeleri olan uçucu kül ve yüksek fırın cürufu, doğaya atılarak verimli tarım arazilerini işgal etmekte, ve çevre kirliliğine neden olmaktadır. Bu çalışmada, %10 uçucu kül, %50 yüksek fırın cürufu, %40 standart portland çimentosu, ve sayılan bu katı maddelerin ağırlıkça %37si kadar NaOH'lı su kullanılarak (aktivatör olarak), soğuk bağlama yöntemiyle prizmatik agregalar yapılmış ve özgül ağırlığı ile su emme oranları incelenmiştir. Daha sonra bu yapay agregalar kullanılarak,0,4 su/çimento oranına sahip,silis dumanı içeren taşıyıcı hafif beton dizaynı yapılmış ve 3 seri beton yapılmıştır. İlk seri 520 kg/m3 çimento içeriğine sahipken, diğer serilerde çimento ağırlıkça %42 oranında uçucu kül ve öğütülmüş yüksek fırın cürufuyla yer değiştirilmiştir.3. seri betonda diğer 2 seriden farklı olarak strux 90/40 fiber donatı kullanılarak etkileri incelenmiştir. Sertleşmiş betonlara 7 ve 28 günlerde basınç ve 28. günde eğilme deneyi yapılmıştır. Sonuç olarak görülmüştür ki, bu yeni agregayla 1900-2000kg/m3 yoğunluklu 28 ila 32 Mpa basınç dayanımlı taşıyıcı hafif beton yapılması mümkündür ve kalsiyum içeren uçucu kül ve yüksek fırın cürufunun çimento yerine kullanılması dayanımı düşürmemektedir.

Özet (Çeviri)

Concrete is the structural material which has the largest opportunity to be used. Due to the Newton's law that indicates F= ma, to make the concrete lighter without any important decrease in its strength will have a revolutinary effect in the area of earthquake resistant design and maybe structural lightweight concrete will be the most important structural material in the future. In Turkey and in the world, by products called fly ash and ground granulated blast furnace slag that are produced by the iron and steel industry and the thermal power plants that uses coal to generate electrical power, are thrown away to the nature, fills the productive farmlands and causes pollution. In this study, artificial ,prismatic aggregates including %10 fly ash,%50 GGBS(ground granulated blast furnace slag),%40 OPC(ordinary portland cement) and water with NaOH(as an activator) with a mass that is the %37 of the mass of materials counted, were produced by using cold bonding method, and their specific gravity and water absorption rates were investigated. Later, by using these aggregates, structural lightweight concretes including 0,4 water/cement ratio, and silica fume, were designed and 3 series of concrete were produced. First series included 520kg/m3 cement content, and in the other series fly ash and GGBS were replaced in the amount of %42 by mass with the cement. Only In the 3rd series that were different from the other two, strux 90/40 fibres were used and their affect were investigated. Hardened concretes were tested for compressive strength at 7 and 28th days and tested for flexural strength at 28th day. The results showed that its possible to produce a structral lightweight concrete with a specific gravity of 1900-2000 kg/m3 and with a compressive strength of 28-32 Mpa, and GGBS and fly ash with calcium content dont decrease the strength of concrete when they are used as a replacement with cement.

Benzer Tezler

  1. Thermal and mechanical performance of cementitious PCM composites

    Çimentolu FDM kompozitlerinin ısıl ve mekanik performansları

    ERMAN YİĞİT TUNCEL

    Doktora

    İngilizce

    İngilizce

    2020

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. BEKİR YILMAZ PEKMEZCİ

  2. Akdeniz iklim koşullarında pasif ev standartlarının uygulanabilirliğinin sinirsel bulanık mantık ile tahmini ve tasarım sürecine dahil edilmesi: Yarı olimpik kapalı havuz örneği

    Estimating the applicability of passive house standards in Mediterranean climate conditions with neuro fuzzy logic and its including into the design process: A case of a semi-olympic indoor pool

    SETENAY UÇAR

    Doktora

    Türkçe

    Türkçe

    2023

    MimarlıkAkdeniz Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. İLKNUR AKINER

  3. Investigation of bluff-body stabilized premixed flame dynamics using an in-house flow solver lestr3d

    Küt cisim ile stabiılize edilmiş ön karışımlı alev dinamiklerinin özgün akış çözücüsü lestr3d ile incelenmesi

    BURAKHAN ŞÜKÜROĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Havacılık Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYŞE GÜL GÜNGÖR

  4. Characteristics of cold sprayed titanium based coatings

    Soğuk gaz dinamik püskürtme yöntemiyle üretilmiş titanyum esaslı kaplamaların karakteristiği

    AHMET HİLMİ PAKSOY

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. MURAT BAYDOĞAN

    DOÇ. DR. ERDEM ATAR

  5. Analysis, applications, and a novel design of double negative metamaterials

    Çift negatif metamalzemelerin analiz, uygulama ve yeni tasarımı

    CUMALİ SABAH

    Doktora

    İngilizce

    İngilizce

    2008

    Elektrik ve Elektronik MühendisliğiGaziantep Üniversitesi

    Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. SAVAŞ UÇKUN