Titanyum dioksit nanotüplerin morfolojisini etkileyen faktörlerin deney tasarımı ile belirlenmesi
Determining the factors affecting the morphology of titanium dioxide nanotubes with experimental design
- Tez No: 397206
- Danışmanlar: YRD. DOÇ. NURŞEN KOÇ
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: Eskişehir Osmangazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Nanobilim ve Nanoteknoloji Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 110
Özet
Bu çalışmada, titanyum implant malzemelerin yüzey özelliklerinin geliştirilmesi için kullanılan elektrokimyasal parlatma ve titanyum dioksit nanotüp tabakası büyütülmesi yöntemleri araştırılmıştır. Elektrokimyasal parlatma deneyleri, merkezi bileşik tasarım (CCD) ile tasarlanmış, deney parametrelerinin yüzey pürüzlülüğüne etkisi belirlenmiş ve optimizasyon çalışması yapılmıştır. Titanyum dioksit sentezleme çalışmalarında elektrokimsyasal anaodizasyon yöntemi kullanılmıştır. Deneyler, Box-Behnken tasarımı kullanılarak tasarlanmış, deney parametrelerinin nanotüp çapı ve nanotüp uzunluğuna etkisi analiz edilmiştir. Nanotüplerin faz analizi için farklı sıcaklıklarda ısıl işleme tabi tutulan numunelerle XRD analizi yapılmıştır. Nanotüplerin morfolojisinin analiz edilebilmesi için taramalı elektron mikroskobu (SEM) kullanılmıştır. Sonuçlar JMP 12 programı ile analiz edilmiştir. Elektrokimyasal parlatmada, voltaj ve süre ana etkileri ile Voltaj*Süre etkileşimi dışındaki etkileşimlerin yanıt üzerinde etkili olduğu bulunmuştur. Titanyum dioksit nanotüplerin sentezinde; nanotüp çapı üzerinde Voltaj ana etkisi ile Voltaj*Süre etkileşiminin etkili olduğu, nanotüp uzunluğu üzerinde ise Konsantrasyon, Voltaj ve Süre ana etkileri ile Konsantrasyon*Voltaj, Konsantrasyon*Konsantrasyon etkileşimlerinin etki olduğu bulunmuştur.
Özet (Çeviri)
In this study, the electrochemical polishing and titanium dioxide growth techniques used for improving the surface properties of titanium implant materials were investigated. Electrochemical polishing experiments were designed with central composite design (CCD), effects of experimental parameters on surface roughness were determined and optimization studies were conducted. In order to synthesize titanium dioxide nanotubes, electrochemical anodization was used. Experiments were designed by using Box-Behnken design and effects of experimental parameters on nanotube diameter and nanotube length were analyzed. XRD analysis of heat treated samples at different temperatures were performed for phase analysis of the nanotubes. Nanotube morphology was analyzed by scanning electron microscobe (SEM). Results were analyzed using JMP 12 software. In the electrochemical experiments, it has been found that main effects (voltage and time) and all the intreractions except Voltage*Süre interaction affect response. In the nanotube growth experiments, statistical analysis revealed that Voltage main effect and Voltage*Time interaction affect the nanotube diameter. Also, it has been found that Concentration, Voltage, Time main effects and Concentration*Voltage, Concentration*Concentration interactions affect the nanotube length.
Benzer Tezler
- Investigation of the growth kinetics and morphology transitions during porous anodization of titanium in ethylene glycol based electrolytes
Etilen glikol bazlı elektrolitlerde titanyumun gözenekli anodizasyonu sırasında oluşan oksidin büyüme kinetiği ve morfolojik geçişlerinin incelenmesi
EREN SEÇKİN
Doktora
İngilizce
2022
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KAMİL ÜRGEN
- Ti6Al4V yüzeyinde anodik oksidasyonla titanyum dioksit nanotüp büyütülmesi ve antibakteriyel özelliklerinin gümüş nanopartikül ve grafen oksit ile geliştirilmesi
Growth of titanium dioxide nanotubes by anodic oxidation on Ti6Al4V surface and improvement of antibacterial properties with silver nanoparticle and graphene oxide
İREM CEMRE TÜRÜ
Doktora
Türkçe
2022
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. NURHAN CANSEVER
- Effect of electrolyte and electrical parameters on the anodic oxidation of ti to improve photocatalytic performance of TiO2 nanotube structures
TiO2 nanotüp yapıların fotokatalitik performansını artırmak için ti'nin anodik oksidasyonu üzerine elektrolit ve elektriksel parametrelerin etkisi
MERT ALTAY
Doktora
İngilizce
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- Tavlama sıcaklığının anodik oksidasyon ile büyütülen TiO2 nanotüplerin fotokatalitik aktivitelerine etkisi
The effects of annealing temperature on photocatalytic activity of TiO2 nanotubes grown by anodic oxidation
ATAKAN YÜKSEL
Yüksek Lisans
Türkçe
2021
Fizik ve Fizik MühendisliğiErzincan Binali Yıldırım ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. ALİ ERCAN EKİNCİ
- Titanyum dioksit nanotüplerin, düşük viskosite bulk fill akışkan kompozit rezinlerin su emilimi ve suda çözünürlük özelliklerine etkisi
Effect of titanium dioxide (TİO2) nanotubes on water sorption and water solubility properties of low viscosity bulk fill flowable composite resins
MUSTAFA KUTAY KARACA
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş HekimliğiSüleyman Demirel ÜniversitesiRestoratif Diş Tedavisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ÖZGE KAM HEPDENİZ