Geri Dön

Various perspectives of loop pipelining

Başlık çevirisi mevcut değil.

  1. Tez No: 400075
  2. Yazar: HASAN FATİH UĞURDAĞ
  3. Danışmanlar: PROF. CHRİSTOS A. PAPACHRİSTOU
  4. Tez Türü: Doktora
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1995
  8. Dil: İngilizce
  9. Üniversite: Case Western Reserve Unıversıty
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Özet yok.

Özet (Çeviri)

Loops can be a bottle-neck in many computer applications. Examples ofsuch applications include industrial inspection tasks, embedded system software,and DSP algorithms. Loop pipelining (LPp) may be used to boost performanceand/or reduce system cost by increasing hardware utilization. This thesis isunique in the sense that it examines LPp in a very wide spectrum. This spectrumbegins with multiprocessing at the higher end, encompasses VLIW architecturesin the middle of the spectrum, and finally reaches the circuit level at the lowerend. Our contributions in this thesis include the following. On the multiprocessingside, we propose the problem of ?Coarse Grain LPp? (CGL). We, then,describe a novel multiprocessor, ALMP, for CGL. ALMap, a novel mappingalgorithm, maps tasks to ALMP. In the VLIW domain, we suggest SRFA, aVLIW architecture derived from ALMP, for embedded applications. At the circuitlevel, we show that retiming, a well-known clock-rate optimization algorithm,can be viewed as a LPp technique. We extend retiming in our ?MultiinterfacePipelining Theorem? (MiPT). MiPT is further extended to ?p-timing?which adds LPp capability to high-level synthesis systems for digital design.

Benzer Tezler

  1. Modeling and nonlinear adaptive control of an aerial manipulation system

    Bir havada manipulasyon sisteminin modellenmesi ve doğrusal olmayan uyarlamalı denetimi

    EMRE YILMAZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Mekatronik MühendisliğiSabancı Üniversitesi

    PROF. DR. MUSTAFA ÜNEL

  2. Dönüşümsel öğrenme modelinin 6. sınıf fen bilimleri dersinde öğrencilerin eleştirel düşünme eğilimlerine ve bilişötesi farkındalıklarına etkisi

    The effectiveness of the transformational learning model on the critical thinking tendency and on the meta-cognitive awareness of the students in the 6th grade science course

    EKREM EPÇAÇAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Eğitim ve ÖğretimSiirt Üniversitesi

    Eğitim Bilimleri Ana Bilim Dalı

    YRD. DOÇ. DR. SEVDA KOÇ AKRAN

  3. Manyetik kontrollü şönt reaktör tasarımı ve elektromanyetik analizlerinin gerçekleştirilmesi

    Magnetic controlled shunt reactor design and performance of electromagnetic analysis

    İSMET KAYMAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Elektrik ve Elektronik MühendisliğiSakarya Üniversitesi

    Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET BAYRAK

  4. Firma dinamik yeteneklerinin rekabet gücüne katkısının kaos teorisi bakış açısı altında analizi

    Analysis of contribution to competitiveness of dynamic capabilities of a firm from the perspective of chaos theory

    ORHAN ORHON

    Doktora

    Türkçe

    Türkçe

    2012

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF. DR. HALUK ERKUT

  5. Vektör kontrol yöntemi için deney düzeneği tasarımı, gerçeklemesi ve bu yöntemin üç fazlı elektrik motorlarında performans karşılaştırması

    Design and implementation of experiment setup for vector control method and performance comparison of this method in three phase electric motors

    MERTCAN ÖZDAĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Otomotiv Mühendisliğiİstanbul Teknik Üniversitesi

    Kontrol ve Otomasyon Mühendisliği Ana Bilim Dalı

    DR. SIDDIK MURAT YEŞİLOĞLU