Modelling and analysis of surface tracking phenomena of solid insulating materials
Başlık çevirisi mevcut değil.
- Tez No: 400560
- Danışmanlar: DR. BRIAN VARLOW, PROF. DAVE AUCKLAND
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1997
- Dil: İngilizce
- Üniversite: The University of Manchester
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 171
Özet
Özet yok.
Özet (Çeviri)
A review has been conducted of solid insulating materials because of their use in electrical transmission and distribution. Several breakdown mechanisms has been proposed. Surface tracking seems to be one of the major reasons for dielectric breakdown in solid insulation materials. Since tracking phenomena is irreversible, it is quite important to monitor the condition of the insulator before any severe damage occurs. Initially a resistive network, consisting of imaginary resistors, is developed, which can simulate the carbonised tracking patterns in polyester resin. Later this model has been improved by adding some statistical equations to estimate the breakdown time for various conditions. A PC based data acquisition system has been developed and implemented, which can acquire data on a real time basis and estimate the surface tracking condition of the insulator by processing the input data. The system, using a pre-trained neural network categorises the different signal patterns and gives an early warning of severe damage on the insulator surface before tracking initiates, hence can be useful for improving the stability and service life of real insulators. Several Inclined Plane Tracking (IEC 587) tests with different flow rates and voltage levels are performed. The surface tracking patterns are examined and classified by using fractal mathematics. Calculations proved the importance of flow rate for the degradation and damage to the surface during the Inclined Plane Tracking test. In general, the project involved the simulation, modelling and estimation of the tracking phenomena in pure polyester resin and polyester resin mixed with ZnO. Many random variables are associated with the surface tracking tests, hence it is not possible to make a momentarily exact judgement on the degradation to the surface. However by reducing the variables, the proposed stochastic and real time models are quite capable of giving satisfactory results.
Benzer Tezler
- Lif esaslı yalıtım malzemelerinde ısı geçişinin incelenmesi
Investigation of heat transfer in fibrous insulation materials
ALİ CAN GÜÇLÜ
Yüksek Lisans
Türkçe
2012
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. SEYHAN UYGUR ONBAŞIOĞLU
- Otomotiv ön cam buz çözme performansının sayısal olarak modellenmesi ve buzun erimesine etki eden parametrelerin irdelenmesi
Numerical modeling of windshield de-icing performance and parametric evaluation of ice melting process
SERHAN TATAR
Yüksek Lisans
Türkçe
2015
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. LEVENT ALİ KAVURMACIOĞLU
- Lageos I ve lageos II için doğruluk analizi
Başlık çevirisi yok
GAYE KIZILSU
Doktora
Türkçe
1998
Jeodezi ve Fotogrametriİstanbul Teknik ÜniversitesiÖlçme Tekniği Ana Bilim Dalı
DOÇ. DR. MUHAMMET ŞAHİN
- Evaluating performance of different remote sensing techniques and various interpolation approaches for soil salinity assessment
Toprak tuzluluğu değerlendirmesi için farklı uzaktan algılama teknikleri ve çeşitli interpolasyon yaklaşımlarının performansının değerlendirilmesi
TAHA GORJI
Doktora
İngilizce
2021
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiBilişim Uygulamaları Ana Bilim Dalı
PROF. DR. AYŞE GÜL TANIK
- An investigation of drag for low earth orbit satellites
Alçak yörünge uydularında sürüklemenin incelenmesi
MUSTAFA KORKUT ÖZARSLAN
Yüksek Lisans
İngilizce
2023
Havacılık ve Uzay Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. MELİKE NİKBAY