Geri Dön

Microscale mechanical characterization of materials for extreme environments

Başlık çevirisi mevcut değil.

  1. Tez No: 402190
  2. Yazar: SEZER ÖZERİNÇ
  3. Danışmanlar: PROF. WILLIAM P. KING
  4. Tez Türü: Doktora
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: İngilizce
  9. Üniversite: University of Illinois at Urbana-Champaign
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 99

Özet

Özet yok.

Özet (Çeviri)

Nanocrystalline metals are promising materials for applications that require outstanding strength and stability in extreme environments. Further improvements in the desirable mechanical properties of these materials require a better understanding of the relationship between their microstructure and grain boundary deformation behavior. Previous molecular dynamics simulations suggested that solute additions to grain boundaries can enhance the strength of nanocrystalline metals, but there has been a lack of experimental studies investigating this prediction. This dissertation presents mechanical and microstructural characterization of nanocrystalline Cu alloys and demonstrate that addition of Nb solutes to grain boundaries greatly enhances the strength of Cu. The measured hardness of Cu90Nb10 alloy is 5.6 GPa which is more than double the hardness of nanocrystalline pure Cu. Microstructural characterization through transmission electron microscopy and energy-dispersive X-ray spectroscopy on these alloys indicates a strong correlation between the grain boundary composition and the hardness. Variation of measured hardness with measured grain boundary composition is in very good agreement with previous molecular dynamics simulation predictions. The results of this work provide experimental evidence that grain boundary doping enhances the strength of nanocrystalline Cu far beyond that predicted by classical Hall-Petch strengthening and decreasing grain boundary energy through solute additions is the key to reaching theoretical strength in nanocrystalline metals. Irradiation induced creep is a deformation mechanism that takes place under combined stress and particle bombardment. Effective characterization of this phenomenon on nanostructured materials is crucial for the assessment of their potential use in next generation nuclear power plants. Direct measurements of irradiation induced creep under MeV-heavy ion bombardment have not been feasible until recently due to the requirements of micron-sized specimens, μN-level force sensitivity, and nm-level displacement sensitivity. A recently developed mechanical characterization technique, micropillar compression, has enabled the testing of miniaturized specimens; however, there has been no demonstration of the application of this technique to irradiation induced creep measurements. This dissertation presents the development of an in situ measurement apparatus for compression testing of micron-sized cylindrical specimens under MeV-heavy ion bombardment. The apparatus has a force resolution of 1 μN and a displacement resolution of 1 nm. The apparatus measured irradiation induced creep in four different amorphous materials and the findings clarified the significance of different creep mechanisms in these materials. In amorphous metals and amorphous Si, the measured irradiation induced fluidity is ≈ 3 dpa-1GPa-1 (dpa: displacements per atom). The measured fluidity is in excellent agreement with previous molecular dynamics simulation predictions, providing experimental evidence for point defect mediated plastic flow under ion bombardment. For amorphous SiO2, stress relaxation through thermal spikes further contribute to the creep response, resulting in higher fluidities up to ≈ 83 dpa-1GPa-1. Finally, this dissertation presents the further development of the creep testing apparatus for high temperature measurements. The apparatus demonstrated good thermal and mechanical stability and measured irradiation induced creep of nanocrystalline Cu at 200°C. Resulting irradiation induced fluidity is ≈ 10% of the fluidity of the amorphous metals, in agreement with previous measurements on free-standing films. Understanding the creep behavior of nanostructured metals under heavy ion bombardment at elevated temperatures is important for identifying the governing creep mechanisms in these materials. The developed apparatus provides a new and effective method of accelerated mechanical characterization of such promising materials for their potential use in future nuclear applications.

Benzer Tezler

  1. Synthesis and characterization of hafnium boride-based ceramic powders

    Hafniyum borür-esaslı seramik tozlarının sentezlenmesi ve karakterizasyonu

    NAZLI AKÇAMLI

    Doktora

    İngilizce

    İngilizce

    2016

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. İSMAİL DUMAN

  2. Mekanik alaşımlama ile CoCrFeMnNi ve AgCoCrFeNi esaslı yüksek entropi alaşım tozlarının sentezlenmesi ve karakterizasyonu

    Synthesization of CoCrFeMnNi and AgCoCrFeNi high entropy alloy powders via mechanical alloying and their characterization

    EBRU SARIOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. BURAK ÖZKAL

  3. Characteristics of cold sprayed titanium based coatings

    Soğuk gaz dinamik püskürtme yöntemiyle üretilmiş titanyum esaslı kaplamaların karakteristiği

    AHMET HİLMİ PAKSOY

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. MURAT BAYDOĞAN

    DOÇ. DR. ERDEM ATAR

  4. Synthesis of poly (Methyl methacrylate) reinforced by multi-walled carbon nanotubes and magnetite nanofillers

    Mwcnt ve magnetit nanodolgular ile güçlendirilmiş poli (Metil metakrilat) sentezi

    ECEM ERMAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Nanobilim ve Nanomühendislik Ana Bilim Dalı

    PROF. DR. NİLGÜN BAYDOĞAN

  5. Toz metalurjisi yöntemleri ile üretilen çeşitli W-Ni-Fe ve W-Ni-Cu ağır alaşımların mikroyapısal ve fiziksel karekterizasyonu

    Microstructural and physical characterization of various W-Ni-Fe and W-Ni-Cu heavy alloys manufactured via powder metallurgy methods

    GÜNKUT ERNAS

    Yüksek Lisans

    Türkçe

    Türkçe

    1993

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. M. LÜTFİ ÖVEÇOĞLU