Degradation processes of materials due to contact-fatigue loading
Başlık çevirisi mevcut değil.
- Tez No: 402749
- Danışmanlar: PROF. DR. EVA SCHMIDOVA
- Tez Türü: Doktora
- Konular: Metalurji Mühendisliği, Makine Mühendisliği, Ulaşım, Metallurgical Engineering, Mechanical Engineering, Transportation
- Anahtar Kelimeler: Contact fatigue testing, Hadfield steel, surface layer, deformation hardening, indentation tests
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Unıversıty Of Pardubıce
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Dissertation work is devoted to a problem with the determination of mechanical changes in surface layers of railway steels, induced by contact-fatigue loading. This study presents the current types of used rail steels and acting degradation mechanisms as a source of typical material degradation. The main problem for intended research is introduced on the base of the current restrictions for a description of processes acting in surface layers. Used solution is based on application of the indentation methods for local mechanical properties measurement. Based on the experimental validation of standard methods, the work suggests the own attitude to direct comparative measurement. The Hadfield steel, including the explosive hardening effect, presented the experimental material. The comparison with the standard pearlitic steel endurance was based on rolling contact tests with defined longitudinal slip. Experimentally induced degradation effect was validated by structural analyses of operationally loaded parts for the both types of steels.
Benzer Tezler
- Effect of low temperature nitriding on the impact sliding wear behavior of an austenitic stainless steel
Düşük sıcaklık nitrasyon işleminin östenitik paslanmaz çeliğin darbeli kayma aşınma davranışına etkisi
TUFAN GÜMÜŞLÜ
Yüksek Lisans
İngilizce
2021
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN ÇİMENOĞLU
PROF. DR. ERDEM ATAR
- Yeni nesil mekanik aort kapakçığı geliştirilmesi:polimer kaplamaların mekanik dayanımve yüzey özelliklerine etkisi
Development of a next-generation mechanical aortic heart valve: Effects of polymer coatings on mechanical strength and surface properties
RABİA GÜZİDE AL
Yüksek Lisans
Türkçe
2026
BiyomühendislikSakarya ÜniversitesiBiyomedikal Ana Bilim Dalı
DOÇ. DR. SERBÜLENT TÜRK
DOÇ. DR. HAMİD ASADİ
- Doğal genleşmiş perlit ve lignoselüloz dolgulu EPDM kauçuk kompozitlerin geliştirilmesi ve karakterizasyonu
Development and characterization of EPDM rubber composites filled with natural expanded perlite and lignocellulose
CENNET ÇAVDAROĞLU
- Bazı katkılı ve katkısız polimerlerin çok düşük hızlarda sürtünme ve aşınma değerlerinin deneysel olarak tayini
Başlık çevirisi yok
ESRA SEVİNÇ
- Farklı türde korozyon önleyici malzemelerin betonun kimyasal bozulmasına etkilerinin irdelenmesi
Investigation of the effects of different types of anti- corrosion materials on chemical deterioration of concrete
MERT ALİ CENGİZ
Yüksek Lisans
Türkçe
2025
İnşaat Mühendisliğiİzmir Katip Çelebi Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. LÜTFULLAH GÜNDÜZ