The transient cavity flow
Başlık çevirisi mevcut değil.
- Tez No: 402811
- Danışmanlar: DR. EMMANUEL BENARD
- Tez Türü: Yüksek Lisans
- Konular: Astronomi ve Uzay Bilimleri, Fizik ve Fizik Mühendisliği, Astronomy and Space Sciences, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2010
- Dil: İngilizce
- Üniversite: The Unıversıty Of Glasgow
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The use of cavity has many problems related to the application of weapons storage mechanisms, as the opening of doors at subsonic and supersonic speeds produces high intensity noise which could damage the internal stores and surrounding cavity structures. Furthermore, the flow inside the cavity could cause a considerable drag force on the object. The objective of this thesis is to explore experimentally the effect of the door kinematics in the transient phase of the cavity flow experimentally. Transient wall pressure at 12 pressure taps which are arranged in a line along the centreline of the cavity floor are measured in a very low-speed wind tunnel facility. Data were acquired for two opening door mechanisms (One mechanism has a vertical doors opening mechanism with a longitudinal hinge, and the other mechanism is a lateral sliding opening one). In both cases, the door movement has been observed to affect cavity pressures over a long period of time, before reaching steady levels. A passive flow control (cylinder) was also demonstrated to act effectively in the shortening of the transient phase. These studies have been supported by flow visualisation, and a preliminary use of Particle Image Velocimetry (PIV).
Benzer Tezler
- The dual reciprocity boundary element method solution of fluid flow problems
Karşılıklı sınır elemanları metodu ile akışkanlar mekaniği problemlerinin çözümü
SEVİN GÜMGÜM
Doktora
İngilizce
2010
MatematikOrta Doğu Teknik ÜniversitesiBilimsel Hesaplama Ana Bilim Dalı
PROF. DR. MÜNEVVER TEZER
- The numerical evaluation of jet impingement effectiveness in a bottom of confined cavity
Duvarla sınırlandırılmış bir kavite tabanında jet çarptırmalı soğutma etkenliğinin sayısal olarak incelenmesi
MEHMET FATİH BAYAR
Yüksek Lisans
İngilizce
2018
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MURAT ÇAKAN
- Süpersonik kavite akışının aktif ve pasif yöntemlerle kontrolü
Active and passive control of supersonic cavity flow
KÜBRA ASENA GELİŞLİ
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiTobb Ekonomi ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. SELİN ARADAĞ ÇELEBİOĞLU
- Düşük mach sayısında kavite içi akışın aeroakustik incelenmesi
Aeroacoustics investigation of low mach number cavity flow
FURKAN COŞGUN
Yüksek Lisans
Türkçe
2018
Havacılık ve Uzay Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SERTAÇ ÇADIRCI
- A numerical investigation on passive flow controls of open cavities at transonic speeds
Açık kavitelerin pasif kontrolünün transonik akışlarda sayısal incelenmesi
OĞUZHAN DEMİR
Yüksek Lisans
İngilizce
2019
Havacılık ve Uzay Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
DOÇ. DR. BAYRAM ÇELİK
DOÇ. DR. KÜRŞAD MELİH GÜLEREN