Microstructural characterisation of silicon nitride-silicon carbide particulate composites
Başlık çevirisi mevcut değil.
- Tez No: 402813
- Danışmanlar: DR. KEVIN M. KNOWLES
- Tez Türü: Doktora
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: İngilizce
- Üniversite: University of Cambridge
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 298
Özet
Özet yok.
Özet (Çeviri)
This dissertation is submitted for the degree of Doctor of Philosophy in the University of Cambridge. The research described in this work was carried out by myself in the period October 1990 to March 1995 under the supervision of Dr. K.M. Knowles in the Department of Materials Science and Metallurgy at the University of Cambridge. To the best of my knowledge the work described in this dissertation is original, except where due reference has been made to the work of others, and nothing is included which is the outcome of work done in collaboration. No part of this dissertation, or any similar to it, has been, or is currently being, submitted for any degree, or other qualification, at any other university. It is less than 60,000 words in length. Some part of the work described here have been published or accepted for publication (for details see Turan and Knowles in Reference Section at the end of the dissertation)
Benzer Tezler
- Alümina fiber takviyeli Al-si metal matriksli kompozitlerin üretimi ve mikroyapı-özellik ilişkilerinin incelenmesi
production of alumina fiber reinforced Al-si metal matrix composites and the investigation of their microstructure-propetry relation ships
HATEM AKBULUT
- Sentezlenen ve ticari LaB6 katkılı mekanik alaşımlanmış Al-Ağ.%7si toz ve sinter hibrit kompozitlerin geliştirilmesi ve karakterizasyonu çalışmaları
Development and characterization investigations of labratory synthesized and commercial LaB6 reinforced Al-7% wt. Si powders and sintered hybride composites
SIDDIKA MERTDİNÇ
Yüksek Lisans
Türkçe
2016
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA LUTFİ ÖVEÇOĞLU
- Farklı karbür fazı içeren partikül takviyeli al matrisli kompozitlerin toz metalurjisi yöntemiyle üretimi ve karakterizasyonu
Production and characterization of various carbide particulate reinforced aluminium matrix composites produced by powder metallurgy method
RİFAT ONUR ÜLKÜSEVEN
Yüksek Lisans
Türkçe
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. BURAK ÖZKAL
- Mekanik alaşımlama yöntemleri ile üretilmiş Al15Si2,5Cu0,5Mg matriksli ve CeO2, Y2O3, La2O3 pekiştiricili kompozitlerin geliştirilmesi ve karakterizasyonu
Development and characterization of Al15Si2,5Cu0,5Mg matriksli ve CeO2, Y2O3, La2O3 reinforced composites synthesized by mechanical alloying
EMRE TEKOĞLU
Yüksek Lisans
Türkçe
2015
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA LUTFİ ÖVEÇOĞLU
- Bor karbür-silisyum karbür kompozitlerinin sıcak presleme ile elde edilmesi
Production of B4C-SiC composites by hot pressing method
EVREN TURAN
Yüksek Lisans
Türkçe
2004
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. OKAN ADDEMİR