Nanocomposite magnetic films assembled from nanoparticles
Başlık çevirisi mevcut değil.
- Tez No: 402977
- Danışmanlar: DR. STEVE BAKER
- Tez Türü: Doktora
- Konular: Astronomi ve Uzay Bilimleri, Fizik ve Fizik Mühendisliği, Astronomy and Space Sciences, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: University of Leicester
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 121
Özet
Özet yok.
Özet (Çeviri)
This thesis consists of three main investigations. The first of these is a study of the magnetic properties of Fe nanoparticles embedded in an Al matrix, with different volume fraction. Both Fe nanoparticles, with a diameter of ̴ 2 nm, and the Al matrix were deposited from the gas phase. The atomic Fe moment of the Fe nanoparticles in Al is much less than the bulk Fe value because of considerable alloying at the Fe nanoparticle and Al matrix interface. Two important parameters, the exchange field (Hex) and random anisotropy field (Hr), were investigated using the Random Anisotropy Model (RAM). Fitting the data to this model reveals that with increasing volume filling fraction (VFF) of Fe nanoparticles in Al, both Hex and Hr show an increase, with Hr showing a more significant increase than for Hex. The second main investigation in this thesis is a study of structure and magnetism in Co nanoparticles embedded in antiferromagnetic Cr. Co K edge and Cr K edge extended x-ray absorption fine structure (EXAFS) experiments were performed in order to investigate atomic structure in the Cr-embedded Co nanoparticles and Cr matrix respectively, whereas magnetism was investigated using a vibrating sample magnetometer (VSM). The atomic structure of the Co nanoparticles is same as the host Cr matrix (bcc), although with a degree of disorder, rather than the bulk Co hcp structure. The net Co moment per atom in the Co/Cr nanocomposite films is significantly lower than bulk Co value, and decreases as the proportion of Co nanoparticles in the film is decreased; for the sample with the most dilute concentration of Co nanoparticles (4.9% by volume), the net Co moment was 0.18 μB/atom. Both the structural and magnetic results show that there is a degree of alloying at the nanoparticle/matrix interface, leading to a core/shell structure in the embedded nanoparticles consisting of an antiferromagnetic CoCr alloy shell surrounding a reduced ferromagnetic Co core. The final part of this work is an investigation into the structure and magnetism of Fe nanoparticles embedded in a Cu1-xAlx alloy matrix, where the structure of the matrix could be controlled by control over its composition. Cu K edge EXAFS measurements show that there is a slight stretch in the Cu-Cu interatomic distances in the alloy matrix, while the face centred structure in the Cu1-xAlx matrix is maintained, as the Al-content is increased. Fe K edge EXAFS measurements reveal that for low Al-content in the Cu1-xAlx matrix, Fe nanoparticles have both fcc and bcc structures, but for higher Al-content the structure of Fe nanoparticles is consistent with bcc. The magnetism measurements, obtained from VSM and SQUID magnetometers, show that the Fe atomic moment increases sharply due to the increasing proportion of bcc Fe nanoparticles. However for Al-content higher than 0.13, the net atomic moment value of Fe decreases slightly, which is consistent with a high degree of alloying between Fe and Al atoms.
Benzer Tezler
- Çinko nanotanecik içeren polimer nanokompozit malzeme üretimi ve karakterizasyonu
Fabrication and characterization of polymer nanocomposite materials incorporated zno nanoparticles
ALEV AKBAŞ
Yüksek Lisans
Türkçe
2018
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. SADRİYE KÜÇÜKBAYRAK OSKAY
- Elektrospinning yöntemi ile gümüş nanopartikül içeren PVP bazlı antibakteriyel nanolif üretimi
Production of the antibacterial PVP nanofibers containing silver nanoparticles via electrospinning method
HAVA ÇAVUŞOĞLU
Yüksek Lisans
Türkçe
2017
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. AYŞEGÜL MERİÇBOYU
- Elektro döndürme yöntemi ile elde edilen karbon nanolif ve karbon nanotüplerin karakterizasyonu ve işlevselleştirilmesi
Characterisation and functionalization of electrospun carbon nanofibers and carbon nanotubes
MERVE YILMAZER
Yüksek Lisans
Türkçe
2014
Gıda Mühendisliğiİstanbul Teknik ÜniversitesiGıda Mühendisliği Bölümü
YRD. DOÇ. FİLİZ ALTAY
- Bor esaslı fonksiyonel nanokompozit ince film sentezlenmesi: yapısal – mekanik – tribolojik özelliklerinin araştırılması
Boron based functional nanocomposi̇te thin film synthesis: investigation of structural - mechanical-tribological properties
AYŞENUR KELEŞ
Doktora
Türkçe
2019
Makine MühendisliğiAtatürk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. İHSAN EFEOĞLU
- Sıcaklık ve manyetik alan duyarlı poli(dimetilsiloksan)/poli(vinil asetat)/politiyofen üçlü kompozit ve nanokompozit filmlerinin sentezi ve özelliklerinin araştırılması
Synthesis of temperature and magnetic field sensitive poly(dimethylsiloxane)/poly(vinyl acetate)/polythiophene ternary composite films and nanocomposite films and investigation of their properties
HÜSNİYE MELİKE KAYABAŞ