Properties of pervious concretes including spherical cold-bonded artificial fly ash aggregates
Yuvarlak soğuk bağlı yapay uçucu kül agregaları içeren geçirimli betonların özellikleri
- Tez No: 406247
- Danışmanlar: Assoc. Prof. Dr. MEHMET GESOĞLU
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 118
Özet
Bu çalışma soğuk bağlama ile üretilen uçucu kül agregasını sürdürülebilir hafif geçirimli beton üretiminde kullanmayı amaçlamaktadır. Yapay uçucu kül hafif agregaları %90 uçucu külün ve %10 portland çimentosunun oda sıcaklğında eğimli kapta soğuk bağlı peletlenmesiyle üretildiler. Bu çalışmada geçirimli betonlar toplam agrega hacminin %0, %25, %50, %75 ve %100'ünün soğuk bağlı uçucu kül agregası ile yer değiştirilmesiyle üretildi. İki farklı beton serisi 0.27 ve 0.32 su çimento oranlarında olmak üzere üretildi. Toplam 10 karışm tasarland. Tek boyutlu doğal ve soğuk bağlı uçucu kül agregaları 12.5 mm'lik elekten geçen ve 8 mm'lik elek üzerinde kalan agregalar olmak beton üretiminde kullanıld. Geçirimli betonlar basınç ve yarmada çekme dayanımları, geçirimlilik karakteri ve aşınma direnci için test edildiler. Deneysel çalışmalarda geçirimli beton karışımlarının kuru yoğunluk ve boşluk miktarları da belirlendi. Ayrıca soğuk bağlı uçucu kül agregasıyla üretilmiş betonların özellikleri GLM-ANOVA isimli istatistiksel teknikle de değerlendirildi. Deneysel sonuçlar soğuk bağlı uçucu kül agregasının kullanımının geçirimli betonun geçirimlilik katsayını önemli ölçüde iyileştirdiğini, mekanik özelliklerini ise düşürdüğünü gösterdi. Ek olarak, sonuçlar tek boyutlu doğal agreganın soğuk bağlı uçucu kül agregası ile yer değiştirilmesinin beton karışımlarının kuru yoğunluğunu azalttığını ve boşluk oranını ise artırdığını gösterdi.
Özet (Çeviri)
The objective of this paper was to utilize cold-bonded fly ash aggregate in pervious concrete to produce a sustainable lightweight pervious concrete. Artificial lightweight fly ash aggregates were manufactured through the cold-bonding pelletization of 90% fly ash and 10% Portland cement in a tilted pan at an ambient temperature. The pervious concrete in this study was manufactured by the replacing the single sized natural aggregate with single sized cold-bonded fly ash aggregate at five replacement levels of 0, 25, 50, 75, and 100% by total aggregate volume. Two different concrete series were produced at two water-to-cement ratio 0.27 and 0.32. Totally, 10 pervious concrete were produced in this study. The single sized natural and cold-bonded fly ash aggregates were the aggregate passing from 12.5-mm sieve and retaining on 8-mm sieve. The pervious concretes were tested for the compressive and splitting tensile strengths, permeability characteristics and abrasion resistance. Moreover, the dry density and void contents of the pervious concrete mixtures were determined during the experimental study. Besides, the properties of pervious concrete produced with cold-bonded fly ash aggregate were also assessed by statistical technique that is GLM-ANOVA. The experimental results indicated that the use of cold-bonded fly ash aggregate significantly enhanced the permeability coefficient of the pervious concrete while it decreased the mechanical properties of the pervious concrete. In addition, the results indicated that replacing the single sized natural aggregate with artificial cold-bonded lightweight fly ash aggregate decreased the dry density of the concrete mixtures and increased the void content.
Benzer Tezler
- The synergic influence of nanosilica and carbon nano tube on fresh and hardened properties of high volume fly ash self-compacting concretes
Yüksek oranda uçucu kül içeren kendiliğinden yerleşen betonların taze ve sertleşmiş özelliklerine nano silika ve karbon nano tüplerin etkisi
VAHID JALİLZADİANNASL
Yüksek Lisans
İngilizce
2015
İnşaat MühendisliğiAtatürk Üniversitesiİnşaat Ana Bilim Dalı
DOÇ. DR. ABDULKADİR CÜNEYT AYDIN
- Agrega-çimento hamuru arayüzeyi mikroyapısının yüksek mukavemetli betonların kırılma parametrelerine etkisi
Effect of aggregate-cement paste interface microstructure on the fracture parameters of high strength concretes
CANAN TAŞDEMİR
- Türk boksitlerinin kullanılması ile refrakter kalsiyum alüminatların üretimi
Production of refractory calcium aluminates by using Turkish bauxites
CENGİZ KAYA
- Nano-silika kullanılarak üretilen betonların mekanik, elastik ve inelastik özelliklerinin incelenmesi
Investigation of the mechanical, elastic and inelastic properties of concrete produced using nano-silica
HASAN NURİ TÜRKMENOĞLU
Doktora
Türkçe
2022
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. HAKAN NURİ ATAHAN
- İçi beton dolu çift cidarlı çelik tüplerin (CFDST) eksenel basınç altında deneysel olarak incelenmesi
Experimental investigation of concrete filled double skin steel tubes (CFDSTs) under axial compression
BERİKA CEREN CİHAN YILMAZ
Yüksek Lisans
Türkçe
2022
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. OĞUZ CEM ÇELİK