Elektrostatik nanolif çekim yöntemine yönelik olarak farklı geometri ve özellikte toplayıcı plakaların geliştirilmesi ve kullanılan toplayıcı plakaların nanolif morfolojisi üzerine etkilerinin araştırılması
Design and manufacturing of collector plates in various geometries and properties towards electrospun nanofibers production and investigation of the effects of collector types on produced nanofibers' morphology
- Tez No: 442843
- Danışmanlar: YRD. DOÇ. DR. MEHMET FATİH CANBOLAT
- Tez Türü: Yüksek Lisans
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: Türkçe
- Üniversite: Süleyman Demirel Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 75
Özet
Elektrostatik lif çekim sisteminin temel prensibi nano boyutta lif üretimi sağlamak için, çoğunlukla, polimer çözeltisinin yüksek gerilim altında toplayıcı bir levha üzerinde toplanmasıdır. Bu yöntemle polimer, kompozit ve seramik nanolifler gibi çok farklı özelliklerdeki malzemeler üretilebilmektedir. Bu çalışma, farklı özellik ve geometrideki toplayıcı plakaların, elektrostatik lif çekim yöntemi ile nanolif üretimi üzerine etkilerinin anlaşılması amacına yönelik olarak yapılmıştır. Çalışma kapsamında, elektrostatik lif çekim düzeneği ile birlikte kullanılması planlanan ilave toplayıcı aparat ve tertibatlar tasarlanması, imalatı ve bu sayede üretimde karşılaşılan problemlerin önüne geçilmesi ve daha işlevsel nanolif üretilmesi de amaçlanmıştır. Planlanan mekanizma ve tertibatların tasarım ve imalatı, yapılan çalışmalarda önemli kolaylıklar ve işlevsellikler sağlayacak niteliktedir. Çalışmanın ilk bölümünde farklı geometride toplayıcı plakaların tasarımı konusu irdelenmiş, ikinci aşamasında ise toplayıcı plakalar üzerinde nanolif yapıların elde edilebilirliği tartışılmıştır.
Özet (Çeviri)
The main principle of electrospinning is the nanofiber production heavily from polymer solution under high voltage application on to the grounded collector. By electrospinning method, nanofibers production with various materials such as polymers, polymers with additives and ceramics can be performed. The purpose of this study is to comprehend the effects of collectors with various material type and geometry on nanofiber production by electrospinning method. Other objectives of the study are to design and manufacture newly developed collector devices and apparatus towards electrospinning to overcome the problems which might be seen during electrospinning, and to produce more efficient and functional nanofiber structures. The design and manufacturing of the proposed mechanisms and equipments can be qualified as portable, efficient and convenient. In the first part of the study, design and manufacturing of newly developed collectors and in the second part nanofiber morphologies on various collectors were analyzed.
Benzer Tezler
- Santrifüj eğirme sistemi ile üretilen liflerle yapılan kompozitlerin mekanik özelliklerinin belirlenmesi
Definition of mechanical properties from centrifugal spun fibrous composites
HARUN YALÇIN
Yüksek Lisans
Türkçe
2014
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ŞAFAK YILMAZ
YRD. DOÇ. ALİ KILIÇ
- Elektrostatik lif çekim yöntemi ile bor katkılı nanolif yüzey eldesi
Boron doped nanofiber mats produced by electrospinning technique
YASEMİN ÇAKMAK
Yüksek Lisans
Türkçe
2014
Tekstil ve Tekstil MühendisliğiSüleyman Demirel ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET DAYIK
YRD. DOÇ. DR. M. FATİH CANBOLAT
- Synthesis and characterization of electrically conductive polypyrrole derivatives-poly(acrylonitrile-co-methyl methacrylate) composites and nanofiber formation
İletken polipirol türevleri-poli(akrilonitril-ko-metil metakrilat) kompozit ince film ve nanolif oluşumu ve karakterizasyonu
ULVİYE DALGIÇ
Yüksek Lisans
İngilizce
2012
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Çift duvarlı faz değiştiren madde çekirdekli nano ve mikrokapsüllerin üretimi ve tekstil uygulaması
Production and textile application of double-walled nano and microcapsules with phase change material core
SİMGE ÖZKAYALAR
Yüksek Lisans
Türkçe
2019
Tekstil ve Tekstil MühendisliğiSüleyman Demirel ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. SENNUR ALAY AKSOY
- Elektrostatik lif çekimi ve elektrostatik püskürtme yöntemi ile özgün mimari ve morfolojilere sahip fonksiyonel nanolif geliştirilmesi
Development of functional nanofibers having novel architecture and morphologies via electrospinning and electrospraying methods
ÇAĞLAR SİVRİ
Doktora
Türkçe
2014
Polimer Bilim ve TeknolojisiSüleyman Demirel ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET DAYIK