Cam takviyeli plastik malzemelerde takviye açısının kırılma davranışına etkisi
The Effect of reinforcement angles on the fracture behaviour of glass reinforced plastics
- Tez No: 45244
- Danışmanlar: PROF.DR. REMZİ ÇETİN
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Kırılma değeri, Plastik malzemeler, Glass Reinforced Polyesters, Woven Roving, Glass Cloth, Fracture Toughness, Stress Concentration, Fracture degree, Plastic materials
- Yıl: 1995
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
ABSTRACT Ph.D. Thesis THE EFFECT OF REINFORCEMENT ANGLES ON THE FRACTURE BEHAVIOUR OF GLASS REINFORCED PLASTICS Ibrahim GÜLDÜ Selçuk University Graduate School of Natural and Applied Sciences Department of Mechanical Engineering Supervisor: Prof.Dr. Remzi ÇETİN 1995, Page: 145 Jury: Prof.Dr. A. Ünal ERDEM Prof.Dr.RafetARIKAN Prof.Dr. Remzi ÇETİN Glass reinforced plastics plates, which contain sharp change in cross section and are loaded to tension, are used extensively in many engineering areas. The stress, concentration on the composite plates differ from isotropic cases in relation to fiber directions and loading conditions thus, the reinforcement type and orientations effect both the crack growth behaviour and fracture toughness values, considerably. In the first stage of this investigation, stress concentration factors were calculated by finite element method for various reinforcement angles and fillet radii at glass cloth-polyester, kevlar-epoxy and graphite-epoxy composite plates. Also the stress concentration factors were obtained by strain-gauge methods for glass cloth- polyester composites experimentally. Then the result obtained in the experimental work were compared with those obtained in the theoretical calculations. In the second stage were carried out on compact tension specimen which prepared in accordance with ASTM E-399. The effect of reinforcement angle to the fracture behaviour and to the fracture toughness, were, experimentally, determined. Toughness values were determined by using the compliance calibration methods and Srawley methods respectively, then all the results were compared.
Benzer Tezler
- Type 4 700 bar hydrogen storage tank optimization study
Tip 4 700 bar hidrojen depolama tankı optimizasyon çalışması
KADİR DEMİRCİ
Yüksek Lisans
İngilizce
2025
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ DEMET BALKAN
PROF. DR. NURİ BÜLENT ERSOY
- Synthesis of poly (Methyl methacrylate) reinforced by multi-walled carbon nanotubes and magnetite nanofillers
Mwcnt ve magnetit nanodolgular ile güçlendirilmiş poli (Metil metakrilat) sentezi
ECEM ERMAN
Yüksek Lisans
İngilizce
2022
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. NİLGÜN BAYDOĞAN
- Cam takviyeli polimer matrisli termoplastik kompozitlerin mekanik özelliklerinin araştırılması.
Investigation of the mechanical properties of glass fibre reinforced thermoplastic composites
BURAK POLAT
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİskenderun Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET YAPICI
- Ön gerilmeli elyaf takviyeli kompozit malzemelerin deneysel ve teorik incelenmesi
Başlık çevirisi yok
NEVZAT TARIM
- Research on the mechanical and morphological properties of microfibrillar reinforced PET/PP blends at various processing routes
Mikrolif takviyeli PET/PP harmanlarının farklı proses aşamalarındaki mekanik ve morfolojik özelliklerinin incelenmesi
İSMİNUR GÖKGÖZ ERKOÇ
Doktora
İngilizce
2018
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. FATMA SENİHA GÜNER