Geri Dön

Gömlek yakalarının kumaş aşınma dayanımının ölçülebilirliğinin incelenmesi

Investigation of measurability of the shirt collar's abrasion resistance

  1. Tez No: 455618
  2. Yazar: MERAL İŞLER
  3. Danışmanlar: PROF. DR. MÜCELLA GÜNER
  4. Tez Türü: Doktora
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 113

Özet

Günümüzde hemen her kesimden ve her yaştan insanın gündelik ve iş hayatında vazgeçilmez yeri olan gömleği kullanımında en yaygın olarak karşılaşılan problemlerden biri, sürtünmeye en çok maruz kalan yaka bölgesinin bedene göre daha çabuk deforme olmasıdır. Bu nedenle, gömleğin performans özelliklerinin tayini ve son kullanım noktasında beklenen ihtiyaçlara cevap verip veremeyeceği önemli bir araştırma konusunu oluşturmaktadır. Oluşturulan deney planına göre prototipi üretilen test cihazında bu numuneler aşındırıcı yüzey olarak belirlenen 4 farklı yüzey ile asidik ter ortamı ve kuru ortam olmak üzere 2 farklı durumda test edilerek gömlek yakalarının kumaş aşınma dayanımının ölçülebilirliği değerlendirilmiştir.

Özet (Çeviri)

Shirts which are taking part in our lives from the beginning of the 3rd century, has been an important part of our attire. Both in daily life and business life shirts are reason for preference by people from all strata and of all ages. One of the main problems in the use of shirts is the collar parts which are exposed to deformation faster compared to the body parts because of the friction between collar and the human neck. Therefore the determination of product qualifications and at the point of end use whether meet the users' needs or not is becoming an extremely important research topic. In this project it has been planned that to develop a device which is for the evaluation of deformation with measuring the resistance level of the collar. The device that is targeted to be developed, some measurement test will be made with a testing plan and the verification of the results will be procured. In this scope firstly the neck movements of the people are observed. In this direction the device movements' protocol were determined according to the movements observation. Afterwards, the shirt collars were prepared by using different type of interlinings. According to the test plan, the shirt collars were evaluated for measurability of the abrasion resistance ability of the collars' fabrics at the device with using 4 different abrasive surfaces and 2 different sweating conditions (which are acidic and dry).

Benzer Tezler

  1. Yumurtacı tavuk etlerinden üretilen ürünlerde kasaplık hayvan yağlarının kullanılması ve bunun ürün kalitesine etkisi

    Use of slaughter animal fats in some products produced with layer hen meat and its effect on product quality

    MURAT KUMRAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Gıda MühendisliğiPamukkale Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    PROF. DR. RAMAZAN GÖKÇE

  2. Manda içyağı ve koyun kuyruk yağının yağ asidi bileşimi ve bazı karakteristik özellikleri, depolama ve ısıl işlemle fiziksel ve kimyasal özelliklerinde meydana gelen değişim

    Fatty acid composition and some characteristic properties of water-buffalo tallows and sheep tail fats, and the changes occurred in physical and chemical properties during the storage and heat treatment

    SEMRA YAPRAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2000

    Gıda MühendisliğiHacettepe Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜROL ERGİN

  3. Amasya oluz höyük arkeolojik katmanlarının arkeojeofizik yöntemlerle belirlenmesi

    Determination of amasya oluz höyük archaeological layers by using archaeogeophysical methods

    HAZEL DENİZ

    Doktora

    Türkçe

    Türkçe

    2018

    Jeofizik Mühendisliğiİstanbul Üniversitesi

    Jeofizik Mühendisliği Ana Bilim Dalı

    PROF. DR. DAVUT AYDOĞAN

    DR. ÖĞR. ÜYESİ FETHİ AHMET YÜKSEL

  4. Fabrication of subsurface submicron photonic structures inside crystal silicon

    Kristal silisyum içinde yüzey altı mikron altı fotonik yapıların üretimi

    BURCU KARAGÖZ

    Doktora

    İngilizce

    İngilizce

    2024

    Fizik ve Fizik MühendisliğiOrta Doğu Teknik Üniversitesi

    Fizik Ana Bilim Dalı

    PROF. DR. ALPAN BEK

  5. Erken Hristiyan ve ilk Bizans resim ve kabartma sanatında kaynak ve okullar (2 cilt)

    Sources and school of painting and sculpture during the early Christian and first Byzantine period

    AHMET MEHMET KİPMEN

    Doktora

    Türkçe

    Türkçe

    1996

    Güzel SanatlarMimar Sinan Güzel Sanatlar Üniversitesi

    PROF.DR. SEMRA GERMANER