Geri Dön

Design and implementation of the mobile fire alarm system using wireless sensor networks

Kablosuz sensör ağları kullanılarak mobil yangın alarm sisteminin tasarımı ve gerçekleştirilmesi

  1. Tez No: 458029
  2. Yazar: KARWAN MUHAMMED MUHEDEN
  3. Danışmanlar: YRD. DOÇ. DR. EBUBEKİR ERDEM
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Computer Engineering and Computer Science and Control
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2017
  8. Dil: İngilizce
  9. Üniversite: Fırat Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Bilgisayar Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 54

Özet

Ev veya endüstri yerlerinin sensörler vasıtasıyla gözetlenmesi ve tahmin yoluyla sorunların önlenmesi bu alanların güvenliği açısından hayati öneme sahiptir. Bu tez, yeni tasarım yöntemleri oluşturarak kablosuz algılayıcı ağı (KAA) tekniklerini nasıl artıracağını ve düşük maliyetli endüstriyel ve ev güvenlik sistemlerini nasıl geliştirdiğini göstermektedir. Sisteme doğru çözümleri garanti etmek ve sunmak için, bu çalışmada sadece sıcaklık ve nem sensörlerinin yanı sıra alev ve gaz sensörleri kullanılmıştır. Basit donanım devresinin tasarımı, her kullanıcının bu kablosuz ev güvenlik sisteminden faydalanmasını sağlar. Sisteme ilişkin kullanıcıları bilgilendirme yöntemi olarak bir bildirim (uyarı) kullanılmıştır. Kurulan Arduino cihazı, Android Studio ile programlanan algılayıcılardan gelen gaz, alev, sıcaklık ve nem sinyallerini alır. Olası bir yangının oluşmasını önceden izlemek için, toplanan verilerin kontrol seviyeleri ile önceden belirlenmiş bir eşiği aştığını tespit ettiğinde, WIFI ağı ile iletişim sağlanıp uyarı alarm mesajını mobil kullanıcılara gönderilmektedir

Özet (Çeviri)

The surveillance of home or industrial places through sensors and the prevention of problems via prediction are of vital importance for the safety of these areas. This Thesis shows how to increase wireless sensor network (WSN) techniques by composing new design methods and improved a low-cost industrial and home safety systems. So as to guarantee and present accurate solutions to the system, not only temperature and humidity sensors but also flame and gas sensors were used in this study. The design of simple hardware circuit allows every user to utilize this wireless home safety system. A notification was used as a method of informing users related to system. The installed Arduino device which was programmed with Android Studio takes received gas, flame, the temperature, and humidity signals from the sensors. In order to pre-monitor the capability of occurrence of a fire, when it detects that the collected data with control levels exceed a predefined threshold it will enable the communication with WIFI network and send the notification alarm message to the mobile users.

Benzer Tezler

  1. Yangın riski taşıyan açık alanlar için CBS tabanlı, bulut altyapılı, yüksek hassasiyetli, nanofotonik erken yangın tespit sistemi tasarımı ve uygulaması

    Design and implementation of a GIS based, cloud substructured, high sensitive, nanophotonic early fire detection system for fire risk areas

    YÜCEL GÜLLÜCE

    Doktora

    Türkçe

    Türkçe

    2019

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Bilişim Uygulamaları Ana Bilim Dalı

    PROF. DR. RAHMİ NURHAN ÇELİK

  2. Kredi kartları riskleri ve güvenlik önlemlerinin sigortacılık açısından incelenmesi

    Research on the risks of credit cards and security implementations in the view of insurance

    AYŞEGÜL BÖLÜKBAŞI

    Yüksek Lisans

    Türkçe

    Türkçe

    1995

    BankacılıkMarmara Üniversitesi

    DOÇ.DR. ÖMÜR Ş. BABAOĞLU

  3. Güneş pili ile çalışan mobil uygulama destekli akıllı ev otomasyon sisteminin tasarımı ve gerçekleştirilmesi

    Design and application of smart home supported by mobile application operated with solar cell

    GÜLAY BAŞOL

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolDumlupınar Üniversitesi

    İleri Teknolojiler Ana Bilim Dalı

    DOÇ. DR. RÜŞTÜ GÜNTÜRKÜN

  4. Design and implementation of an industrial internet of things based Scada system: Case study the petroleum pipeline systems

    Endüstriyel nesnelerin interneti tabanlı Scada sisteminin tasarımı ve uygulanmasi: Petrol boru hattı sistemleri vaka çalışması

    OMAR MOHAMMED MAHDI AL MUBARAK

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Elektrik ve Elektronik Mühendisliğiİstanbul Gelişim Üniversitesi

    Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MUSARIA KARIM MAHMOOD MAHMOOD

    DR. ÖĞR. ÜYESİ AHMED AMİN AHMED SOLYMAN

  5. Yangın güvenliği için yapı tahliyesine yönelik yürütülen güncel araştırmalarda yapı bilgi modellemesi (YBM) kullanımının değerlendirilmesi

    Evaluation of the current research focused on use of building information modeling (BIM) in building evacuation studies for fire safety

    SÜMEYYE AKIN OKUYUCU

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    MimarlıkBaşkent Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. AYSU SAGUN KENTEL