Tıbbi görüntüleme cihazlarından biri olan damar görüntüleme cihazının tasarımı ve üretimi için fizibilite çalışması
Feasibility study for the design and production of vein imaging device, which is one of medical imaging devices
- Tez No: 460906
- Danışmanlar: PROF. DR. MUSTAFA KURT
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İleri Teknolojiler Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 88
Özet
Bu çalışma ile amaç“İleri Teknolojiler”disiplinler arası bilimi konularını içeren bir cihazın seçimi, konu hakkında teknik-bilimsel makalelerin araştırılması ve cihazın çalışma prensibinin bu tekniklere uygun olarak yorumlanması; bunun akabinde de diğer bir disiplin dalı olan“Endüstri Mühendisliği”ne adapte ederek bir fizibilite çalışması gerçekleştirmektir. Bunun için seçilen cihaz; Türkiye'de henüz kullanımı çok yeni olan, yerli marka ya da patentli bir ürünün pazarda bulunmadığı, henüz konu hakkında AR-GE çalışmaları çok yaygın olmayan, girişimde bulunulması halinde Türkiye tıbbi cihaz sektörüne fayda sağlayacak olan damar görüntüleme cihazıdır. Bunun için öncelikle tıbbi cihaz sektörünün uluslararası ve ulusal pazar durumu incelenmiş, Türkiye'de tıbbi cihaz sektörünün durumu ile ilgili Güçlü Yönler, Zayıf Yönler, Fırsatlar, Tehditler (GZFT) analizi yapılmış; akabinde cihazın çalışma prensibine ilişkin teknik fizibilite yapılmış, konuyla ilgili bilimsel makalelerden analizlere yer verilmiş ve mali analizi Başabaş Noktası (BBN) analizi tekniği kullanılarak çalışma sonuçlandırılmıştır. Bu çalışmayı diğer fizibilite çalışmalarına göre farklı kılan kısım; mali analizinin yeni bir tesis kurulumu şeklinde değil, spesifik bir ürünün mevcut bir üretim tesisinde üretimine geçişine ilişkin projelendirme maliyeti şeklinde bir analiz yöntemi kullanılarak hesaplanmasıdır. Ayrıca bu çalışma bir destek projesine hazırlık gibi düşünülerek iş-zaman grafiğine de yer verilmiş ve bir AR-GE projesi için Türkiye'de başvurulabilecek destekler de belirtilmiştir. Sonuç ve öneriler kısmı ile projenin sektöre ve Türkiye ekonomisine sağlayacağı faydalara yer verilmiştir.
Özet (Çeviri)
The aim of this study is the selection of device comprising an interdisciplinary science topics from“advanced technologies”, investigation on the subject of technical-scientific article, interpretation in accordance with the principle of operation of the device, subsequently to perform a feasibility study by adapting“industrial engineering”that another branch of discipline. For this purpose, the selected device is“Vein Imaging Device”, which to use is so new yet, there is not any local brand or patented product on the domestic market, research and development effort is not common in the subject if the attempt is to made Turkey medical device sector will benefit with this Vein Imaging Device. So, initially international and national market situation of the medical device industry is examined, then Strengths, Weaknesses, Opportunities, Threats (SWOT) analysis has been performed regarding the status of the medical device industry in Turkey; subsequently, the technical feasibility study is made relevant to working principle of the device, the analyzes from the relevant scientific articles are given, then financial analysis has been performed by the method of Break-Even Point Analysis, and the study has been finalized. What makes this study unique and original, compared to other feasibility studies, is that the financial analysis is calculated using an analysis method, not as a new plant installation, but as a project cost of switching from a specific product to production at an existing plant. Furthermore, this study is considered as the preparation of a support project, work-time graph is given and also indicated the supports in Turkey that can be apply for a R&D project. With the part of results and recommendations, the benefits provided by the project to the industry and economy in Turkey are given.
Benzer Tezler
- Manyetik rezonans görüntülerinde tümör bölgelerinin otomatik tespiti
Automatic detection of tumor zones in magmetic resonance images
HÜSAMETTİN MERT TEZCAN
Yüksek Lisans
Türkçe
2020
Elektrik ve Elektronik Mühendisliğiİstanbul Arel ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ GÖKALP TULUM
- Design and analysis of a six-phase Vienna rectifier
Altı fazlı Viyana doğrultucu tasarımı ve analizi
FURKAN DURAN
Yüksek Lisans
İngilizce
2024
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DOÇ. DR. DERYA AHMET KOCABAŞ
- Prediction of COVID 19 disease using chest X-ray images based on deep learning
Derin öğrenmeye dayalı göğüs röntgen görüntüleri kullanarak COVID 19 hastalığının tahmini
ISMAEL ABDULLAH MOHAMMED AL-RAWE
Yüksek Lisans
İngilizce
2024
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolGazi ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
PROF. DR. ADEM TEKEREK
- Noise removal from the image using convolutional neural networks-based denoising auto encoder
Görüntüden gürültünün kaldırılması: Konvolüsyonel sinir ağları tabanlı gürültü azaltıcı otokodlayıcı
YOUNUS FAROOQ FAEQ CHAWARASH
Yüksek Lisans
İngilizce
2023
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolÇankırı Karatekin ÜniversitesiElektronik ve Bilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERKAN SAVAŞ
- Özel sağlık kuruluşlarında tedarik zinciri yönetimi
Supply chain management in private healthcare organizations
ÜLKÜ ADALI
Yüksek Lisans
Türkçe
2019
HastanelerDokuz Eylül Üniversitesiİşletme Ana Bilim Dalı
DR. ÖĞR. ÜYESİ EMİNE YASEMİN YEGİNBOY