Development of molecular imprinted polymer based optical sensor for determination of pesticides
Pestisit tayini için moleküler baskılı polimer esaslı optik sensör geliştirilmesi
- Tez No: 479613
- Danışmanlar: PROF. DR. EMÜR HENDEN, DOÇ. DR. NUR AKSUNER
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 143
Özet
Bu tezde, moleküler baskılanmış polimerler kullanılarak eser düzeydeki 1-naftol ve carbendazim pestisitlerinin tayinlerinin yapılması incelenmiştir. Tezin ilk bölümünde, eser düzeydeki 1-naftol tayinini gerçekleştirmek üzere dört farklı moleküler baskılanmış polimer sentezlenmiş ve baskılama faktörü en yüksek olan polimer belirlenmişir. 1-naftol tayini için optimum çalışma pH'ı 9, polimerin kapasitesi ise 70.86±7.22 mg/g (n=3) olarak bulunmuştur. Yöntem, 1-naftol tayini için çeşitli su örneklerine uygulanmış ve nicel geri kazanım değerleri elde edilmiştir. Tezin ikinci bölümünde ise, florimetrik carbendazim tayini öncesi manyetit-moleküler baskılanmış polimer literatürde ilk defa seçimli adsorban olarak kullanılmıştır. Hazırlanan polimerle carbendazim tayini için optimum çalışma pH'ı 8, polimerin kapasitesi ise 2.31±0.63 mg/g olarak bulunmuştur. Geliştirilen yöntem, elma ve portakaldaki carbendazimi belirlemekte kullanılmıştır.
Özet (Çeviri)
In this thesis, molecularly imprinted polymers were used in order to investigate the determination of trace levels of 1-naphthol and carbendazim pesticides. In the first chapter of the thesis, four different imprinted polymers were synthesized for the determination of trace levels of 1-naphthol and the polymer with the highest imprinting factor was determined. Optimum pH for 1-naphthol determination was found to be 9 and the polymer capacity was found to be 70.86±7.22 mg/g (n=3). The method was applied to various types of water and quantitative recovery values were obtained. In the second chapter of the thesis, magnetite-molecularly imprinted polymer has been used for the first time in the literature as selective adsorbent before the fluorimetric determination of carbendazim. Optimum working pH for determination of carbendazim with the synthesized polymer was found to be 8 and the capacity of the polymer was found to be 2.31±0.63 mg/g. The proposed method was applied to apple and orange for the determination of carbendazim.
Benzer Tezler
- Development of optical sensor for magnesium determination and molecular imprinted polymer for chloramphenicol
Magnezyum tayini için optik sensor geliştirilmesi ve kloramfenikol için moleküler baskılı polimer
ELİF TOPOYAN
- Synthesis and sensor appplication of reusable fluorescent uranyl-imprinted polymer gels
Yeniden kullanılabilir uranil-imprint floresan polimer jellerin sentezi ve sensör olarak kullanılması
ELİF GÖKÇE ATÇAKAN
Yüksek Lisans
İngilizce
2018
Kimyaİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ORHAN GÜNEY
- Kardiyak miyozin bağlayıcı protein-c tayini için optik temelli sensörlerin hazırlanması
Preparation of optical-based sensors for the determination of cardiac myosin binding protein-c
MERT KORKMAZ
- Bisfenol a tanıma bölgelerine sahip moleküler baskılanmış polimerik kartuşların ve sensör sisteminin geliştirilmesi
Development of molecularly imprinted polymeric cartridges and sensor system with bisphenol A recognition sites
RECEP ÜZEK
- Atomik kuvvet mikroskobu ile biyomoleküllerin doğal ortamlarında tayini ve karakterizasyonu
Detection and characterization of biomolecules with atomic force microscope in their native environments
DEMET ÇATÇAT KAYIM
Doktora
Türkçe
2014
BiyofizikHacettepe ÜniversitesiNanoteknoloji ve Nanotıp Ana Bilim Dalı
YRD. DOÇ. DR. MEMED DUMAN
PROF. DR. EMİR BAKİ DENKBAŞ