Enerji verimliliğinin kent ölçeğinde planlanması ve mekan ile etkileşimi Milas örneği
Planning energy efficiency in urban scale, it's interaction with urban form Milas case
- Tez No: 486573
- Danışmanlar: YRD. DOÇ. DR. MEHMET ALİ YÜZER
- Tez Türü: Doktora
- Konular: Enerji, Şehircilik ve Bölge Planlama, Energy, Urban and Regional Planning
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Şehir ve Bölge Planlama Ana Bilim Dalı
- Bilim Dalı: Şehir ve Bölge Planlama Bilim Dalı
- Sayfa Sayısı: 175
Özet
Bu çalışmada giderek önemi artan enerji verimliliği konusunun şehir planlama disiplini içinde ele alınmasına yönelik bir yöntem geliştirilmiş ve uygulaması yapılmıştır. Enerji verimliliği konusunun genel çerçevesinin aktarılmış ve şehir ölçeğinde ele alınmasının önemine vurgu yapılmıştır. Yapı ve yerleşim ölçeğinde enerji modelleri, performansa dayalı tasarım ilkeleri ve çalışmada kullanılan enerji modeli hakkında bilgi verilmiştir. Yapı fiziği, ısı transferinin temel prensipleri ve yapılarda ısı transferinin nasıl enerji akımlarına dönüştüğü ve yapılarda ısıtma, soğutma, aydınlatma, ekipman yüklerinin nasıl oluştuğu açıklanmıştır. Yapıların, kullanıcıların ısıl ve görsel konforları istenen düzeyde karşılanırken enerji ve kaynak tüketimlerinin minimum seviyelere indirecek şekilde nasıl tasarlanabileceği, yapılarda yapı tasarımına farklı disiplinlerin entegrasyonu ile kaynak ve enerji tüketimlerinde verimliliğin nasıl sağlanabileceği anlatılmıştır. Kent formunun, kentin fiziksel yapısının, özelliklerinin kent iklimini nasıl etkilediği, tasarım ve kent politikalarıyla kent ikliminin nasıl değiştirilebileceği; bu değişiklikler ile nüfusun açık ve kapalı mekanlardaki konforunu geliştirmenin, yapılarda yazın soğutma ve kışın ısıtma için gereken enerji ihtiyacını düşürmenin mümkün olduğu anlatılmıştır. Kentte istenen ısıl koşulları gerçekleştirmek için, kent tasarımcısının kent morfolojisi ve kentin farklı iklim koşulları altındaki ısıl performansı arasındaki bilmesi gereken ilişkiler açıklanmıştır. Çalışmada planlama aşamasında kullanılması öngörülen enerji verimliliğini esas alan bir yöntem önerilmiş ve test edilmiştir. Yöntem iki aşamadan oluşmaktadır. Birinci aşama yapı ölçeğinde yapı parametrelerini ikinci aşama yerleşim ölçeğinde planlama parametrelerini esas almaktadır. Birinci aşamada yapı ölçeğinde bir yapının enerji performansına etki eden parametrelerden bir grup temel parametre seçilmiş ve bu parametreler için uygun değerler belirlenmiştir. Seçilen yapı parametreleri değerleri için Milas' ın özgün dokusunu esas alan gelişme planın enerji simulasyonları yapılmıştır. Simulasyon sonuçları değerlendirilerek yapı parametrelerinin enerji performansını ne kadar etkilediği irdelenmiştir. Değerlendirme sonucunda ikinci aşama simulasyonlarda kullanılmak üzere enerji verimliliğini açısından en iyi sonuçları veren yapı parametreleri değerleri tespit edilmiştir. Tespit edilen değerlerin plan notlarına eklenerek mimarlık, makine mühendisliği, inşaat mühendisliği gibi disiplinlerin analizlerinde dikkate alması öngörülmektedir. İkinci aşamada yerleşim ölçeğinde yerleşimin enerji performansına etki edebilecek planlama parametreleri seçilmiştir. Planlama parametrelerin belirlenen değerleri için Milas' ın özgün dokusunu esas alan plandan 1/1000 ölçekli yeni planlar türetilmiştir. Milas için tasarlanan gelişme planlarının, önerilen modele bağlı olarak enerji simulasyonu yapılmış, elde edilen sonuçlar yorumlanarak önceden belirlenen parametrelerin yerleşimin enerji performansına ne ölçüde etki ettiği belirlenmiştir. Plan notlarına eklenmek üzere sonuç performansı önemli oranda etkileyen parametreler saptanmıştır. Planların gün ışığı simulasyonları yapılarak planlama parametrelerinin, plandaki yapıların, yapıların katlarının günışığından faydalanma derecesi üzerindeki etkileri ortaya konulmuştur. Yapı katlarında iç hacimlerin yerleştirilmesinde günışığı simulasyonlarının sonuçlarının dikkate alınması önerilmektedir. Milas için tasarlanan üç ayrı dokuya sahip gelişme planlarının enerji simulasyonları yapılarak her bir dokuda oluşan oluşan toplam, ısıtma, soğutma enerjisi taleplerini incelenerek planların karşılaştırmaları yapılmıştır. Planların oluşturdukları enerji taleplerine göre değerlendirilmesi planların değerlendirilmesinde ve yeni planların geliştirilmesinde ek bir kriter olarak önerilmiştir.
Özet (Çeviri)
Today 50% of world's population is living in the cities and this number is expected to rise 70% by 2050. There are social and economical drivers behind this rapid urbanization. Cities provide labor, education, security and social oppurtunities to people. While cities provide such oppurtunities to their residents they consume huge amounts of energy for transport, industrial and commercial activities, buildings and infrastructure, water distribution, and food production. It is estimated that 2/3 of global energy consumption and 70% of greenhouse gas emmissions take place in cities. Cities will contribute to efficient use of energy, deployment of renewable energy technologies and in success of climate change policies. For this reason, from small settlements to megacities, cities will play a role in reaching energy policy targets and there will be many changes in the way cities consume energy. In the study a general framework for energy efficeny in cities is given and evaluating the matter in city scale is emphasized. In order to reduce energy losses in cities energy efficiency measures should be considered in planning phase of urban settlements. Such actions can be more prevailing and effective than building scale interventions. But there are powerful barriers that prevent cities from recognizing and implementing their potentials. Strategies are needed to overcome those barriers such as integrated energy planning for neighbourhoods or energy master plans for whole cities. Decision-making processes, organization and implementation strategies have more importance for urban scale energy efficeny compared to technological solutions for individual buildings. For sustainable urbanization new urban scale models need to developed for the information level of urban energy policies and urban planning decisions. In the study a new analysis method for energy efficiency is proposed and tested for planning discipline. The thesis has three aims. First aim is to introduce building design and urban design parameters that effect energy efficiency in building and urban scale. Second aim is to evaluate the effect of building parameters on building energy demand in the planning phase of a new settlement area by using energy simulation method. Building parameters values which give the least energy demand can be added to the planning notes. The aim is to proffer suggestions to other disciplines which will take part in the architectural design, mechanical system design and construction of buildings in the planning area. Third aim is to investigate relationship between urban form and energy demand. Early planning phase design decisions may have a direct effect on energy performance of the settlement. These effects can not be evaluated with simple calculations. Building energy simulation can be a tool to assess the effects of alternative plan designs on building energy performance. Using building energy simulation tools as a urban design decision support tool is new approach which can give urban designers an opportunity to assess their plans from energy perspective. In the study energy models on building and urban scale, performance based design principles and urban building energy modeling are explained. Energy models in building scale are used in architectural design decisions and engineering calculations of heating, cooling, lighting systems of buildings. Urban scale energy models are focused on technology design, building design, urban climate, system design, policy assessment and transportation and land use. Technology design models calculate supply-side parameters of energy supply technologies. The design and performance of urban wind turbines, solar energy systems, fuel cells and waste-to-energy systems are subjects of technology design models. Urban climate models deal with heat island effects on buildings and calculate the temperatures and lighting conditions within buildings. System design models use optimization techniques to to determine the comyapıtions of capital equipment and operating patterns under certain constraints. Policy assessment models study policy decisions and their effect on energy performance of cities. Transportation and land use models are generally large complex econometric models which try capture the major dynamics of urban processes. These models focus on human activity and land use patterns. Building design models deal with building design and renovation, energy demand estimation, urban planning and policy. Energy model used in this study converts urban massing models into thermal shoebox models. The method groups facade segments by similarity of their local solar microclimate. A reference shoebox model consisting of a perimeter and a core region represent each group. The model simulates shoeboxes of each group and then extrapolates simulation results. The method estimates urban energy use in a feasible and timely manner. Building physics deal several different areas in building performance. Basic principles of heat transfer, air movement, thermal performance, control of moisture, ambient energy, acoustics, light, climate and biology are subjects of building physics. These physical events cause heating, cooling, lighting and plug loads during building operation. Buildings need to be designed to meet occupant's comfort need. We need to heat, cool, ventilate and control humidity in buildings to meet comfort levels. Energy efficient architectural design, advanced materials and passive technologies in buildings can reduce the energy demand and improve the environmental impact. Energy efficient building design and passive techniques are explained in the thesis. Urban form, physical structure of the city can effect urban climate. The form and physical structure of the city can be controlled by urban planning and design. It is possible to change urban climate through urban policies and design of cities. By policy and design it is possible to improve the comfort conditions of outdoor and indoor environments. Improvement of comfort conditions of occupants reduce the energy demand of the buildings for heating in winter and for cooling in summer. For better urban thermal conditions urban designers need to understand the relationship between urban morphology and the thermal performance of the city in different climates. The city site selection and the urban configuration design are two major climate related factors that effect urban climate and urban comfort. The analysis method in the thesis has two stages. In the first stage building parameters that effect building energy demand are taken into account and in the second stage planning parameters that effect building energy demand are considered. In order to calculate effects of building and planning parameters on building energy demand; EnergyPlus whole building energy simulation program and urban modeling interface umi are used for the analysis. EnergyPlus is the U.S. Departments of Energy's 3rd generation dynamic building energy simulation engine for modeling building, heating, cooling, lighting, ventilating and other energy flows. Umi is a CAD-based design environment for architects and urban planners interested in modeling the environmental performance of neighborhoods and cities with respect to operational and embodied energy use, walkability and daylighting potential. In the first stage a group of basic parameters that effect building energy demand are selected and relevant values are determined for the parameters. Milas development plan which has forms of traditional settlement of Milas, simulated for the selected parameter values. Simulation are results are evaluated to observe building parameters' effect on building energy demand. After the evaluation building parameter values that deliver best building energy performance are chosen for second stage of analysis. It is also proposed to annex simulation results to urban plan notes for consideration of other disciplines that will take part in the design and construction of development area. In the second stage planning parameters that effect building energy demand are selected. New plans are reproduced from traditional Milas plan by using new planning parameter values. Energy simulations are made for new plans in order to see the effect of new planning parameter values on building energy demand. Another indicator we calculated is sDA value of floor plans. We conducted urban daylight simulations on reproduced plans to find effect of planning parameters on daylight potential of floor plans. Simulation resuls evaluated and planning parameters that deliver best building energy performance and best urban daylight performance values are chosen to be added planning notes of the proposed plan. Urban daylight simulations also gave us insight about how to locate zones according to their daylight need in the architectural floor plans. Milas development areas different plans were designed. Beside traditional development plan that we simulated earlier, we choose two more plans for simulation. One plan has a grid system and the other plan has form of both grid system and traditional form. We used simulation results to compare heating, cooling and total energy demand of three development plans. There are significant changes in heating, cooling and total energy demand of three plans. Energy simulation in urban design phase informs us about our design decisions. Energy demand of urban plans can be an additional criteria for assessment of urban development plans.
Benzer Tezler
- İstanbul'da hazırlanan kentsel tasarım projelerinin planlama sistematiğindeki yerinin karşılaştırmalı hukuka göre değerlendirilmesi
Evaluation of urban design projects prepared in İstanbul by comparative law
AYCAN NUR SAYRAM
Yüksek Lisans
Türkçe
2020
Şehircilik ve Bölge Planlamaİstanbul Teknik ÜniversitesiKentsel Tasarım Ana Bilim Dalı
DOÇ. DR. ENGİN EYÜP EYUBOĞLU
- İnşaat sektörünün ekonomideki yeri ve önemi
The place and the importance of constructions sector in the economy
MEHMET CAN HOZAN
Yüksek Lisans
Türkçe
2006
EkonomiDicle ÜniversitesiMaliye ve Ekonomi Ana Bilim Dalı
PROF. DR. ZEKİ SEZER
- Enerji etkin tasarımda kentsel açık alanların potansiyellerinin değerlendirilmesi: Beşiktaş 4. Levent örneği
Evaluation of potentials of urban open spaces in energy efficient design: The case of Besiktas 4. Levent
AYŞE ERKEK
Yüksek Lisans
Türkçe
2018
Enerjiİstanbul Teknik ÜniversitesiKentsel Tasarım Ana Bilim Dalı
PROF. DR. ÖZLEM ÖZÇEVİK
- Geleneksel konut dokusunun enerji verimliliğinin incelenmesi: Kayseri, Germir örneği
Examination of energy efficiency of traditional housing pattern: The case of Germir in Kayseri
BELKIS BAHAR ALPARSLAN
Yüksek Lisans
Türkçe
2022
MimarlıkFatih Sultan Mehmet Vakıf ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. MİNE ESMER
- A generative urban configuration model: Optimization of sky view factor and open spaces
Üretken kentsel form modeli: Gökyüzü görüş faktörü ve açık alan optimizasyonu
ELİF HAZAL OKUR
Yüksek Lisans
İngilizce
2022
MimarlıkYaşar ÜniversitesiMimarlık Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SEÇKİN KUTUCU