Bakır tayinin için elektrokimyasal ölçüm yöntemi geliştirilmesi
Development of electrochemical measuring method for copper determination
- Tez No: 513055
- Danışmanlar: PROF. DR. MÜBERRA ANDAÇ
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Ondokuz Mayıs Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Tez çalışmasında, farmöstik ürünlerde, gıda ürünlerinde, atık su örneklerinde bakır(II) iyonlarının hızlı ve ekonomik elektrokimyasal tayini için potansiyometrik akış enjeksiyon analiz yöntemi geliştirildi. Bakır tayini için, bakır seçici iyonofor olarak (N,N′-bis(o-salicylidene)-2,3-diaminopyridine) kullanılarak, tümüyle katı-kontakt PVC-membran elektrotlar hazırlandı. Hazırlanan elektrotun cevap zamanı, kullanım ömrü, doğrusal çalışma aralığı, pH çalışma aralığı, tayin limiti, seçicilik katsayısı ve tekrarlanabilirlik gibi potansiyometrik performans özellikleri durgun ortamda bilgisayar kontrollü potansiyometrik ölçüm sisteminde araştırıldı. Elektrotun hareketli ortamdaki potansiyometrik performans özelliklerini test etmek için düşük ölü hacme sahip akış hücresi hazırlandı. Hareketli ortamda, pH etkisi, akış hızı, enjeksiyon hacmi ve hareketli faz derişimi gibi çalışma elektrotunun performans özelliklerini etkileyen faktörler üzerinde çalışmalar yapıldı. Çok değişkenli optimizasyon yöntemi ile akış sistemi için en iyi performans parametreleri belirlendi. Önerilen potansiyometrik esaslı akış enjeksiyon analizi yöntemi farmasötik örneklerde, gıda maddelerinde, ve su örneklerinde bulunan bakır (II) miktarını belirlemek için başarıyla uygulandı. Yöntemin geçerliliği ve uygulanabilirliği AAS ve standart referans malzeme SPS-WW2 (atık su) analizi ile doğrulandı.
Özet (Çeviri)
In this thesis, a fast, reliable potentiometric method and potenItiometric method based flow injection analysis method was developed, for determination of copper in pharmaceutical products, food products, wastewater samples. A completely solid-contact PVC-membrane electrode was prepared for the copper determination using copper (N, N'-bis (o-salicylidene) -2,3-diaminopyridine) as the copper(II) selective ionophore. Potentiometric performance characteristics such as response time, lifetime, linear working range, pH working range, limit of determination, selectivity and repeatability of the prepared electrodes were investigated in a computer controlled potentiometric measurement system in a stationary phase. In the proposed method, the interactions of various interfering ions were investigated and the experimental results were reported. A low-volume flow cell was prepared to test the potentiometric performance characteristics of the electrode in the flow system. Factors affecting the performance characteristics of the working electrode, such as pH effect, flow rate, injection volume and moving phase concentration, were studied in the moving environment. The proposed potentiometric flow injection analysis method has been successfully applied to determine the trace level of copper (II) present in foodstuffs, pharmaceutical samples, and water samples. The validity and applicability of the method were verified by AAS and standard reference material SPS-WW2 (waste water) analysis.
Benzer Tezler
- Riboflavin ve piridoksin vitaminlerinin tayini i̇çin elektrokimyasal sensör geliştirilmesi
Development of electrochemical sensor for determination of vitamins riboflavin and pyridoxine
MERVE YALÇİN AÇIKALIN
- Gıda maddelerinin toplam antioksidan kapasitelerinin tayini için yeni bir elektrokimyasal yöntem geliştirilmesi
Development of a novel electrochemical method for determining the total antioxidant capacity of foodstuff
SEFA BAKİ
Doktora
Türkçe
2016
Beslenme ve Diyetetikİstanbul ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. MUSTAFA ÖZYÜREK
- A highly selective and reusable colorimetric and turn-on fluorescent chemosensor based on rhodamine tethered aldehyde functional microspheres for the detection of Cu2+ and Hg2+ ions
Cu2+ ve Hg2+ 'nın deteksiyonu için yüksek seçicilik gösteren rodamin tutturulmuş aldehit fonksiyonlu mikroküre esaslı kolorimetrik ve floresans 'turn on' tekrar kullanılabilir kemosensörlerin hazırlanması
PINAR ÖZMEN
Yüksek Lisans
İngilizce
2019
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. BÜNYAMİN KARAGÖZ
- Çinko ve nikel kaplanmış düşük karbonlu çelik plaka ve vidaların korozyon davranışının incelenmesi
Investigation of corrosion behavior of zinc and nickel coated low carbon steel plates and screws
NEDRET TUNA
Yüksek Lisans
Türkçe
2013
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN ÇİMENOĞLU
- Voltammetric determination of heavy metals in environmental samples by carbon electrodes
Çevresel örneklerde karbon temelli elektrotlarla voltametrik ağır metal analizi
GÜL ŞİRİN USTABAŞI
Doktora
İngilizce
2022
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MUSTAFA ÖZCAN
DR. EBRU ÇETİNKAYA