Prototype design and mission analysis for a small satellite exploiting environmental disturbances for attitude stabilization
Başlık çevirisi mevcut değil.
- Tez No: 518931
- Danışmanlar: Dr. MARCELLO ROMANO, Dr. STEPHEN TACKETT
- Tez Türü: Yüksek Lisans
- Konular: Astronomi ve Uzay Bilimleri, Hava ve Uzay Hekimliği, Havacılık Mühendisliği, Astronomy and Space Sciences, Air and Space Medicine, Aeronautical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: The Naval Postgraduate School
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 167
Özet
Özet yok.
Özet (Çeviri)
In order to accomplish complex and sophisticated missions, small satellites, particularly CubeSat, need a robust and accurate attitude control system. Due to the mass- and volume-constrained design environment of CubeSat, conventional methods are sometimes inadequate to provide needed performance at low altitudes where environmental disturbances are high. This thesis studies exploitation of the most dominant disturbance torque at low altitudes (i.e., the residual aerodynamic torque) for stabilization and attitude control. By shifting internal masses, the distance between the center of pressure and the center of mass is adjusted so that the aerodynamic torque can be modulated as the control torque. To establish a realistic simulation environment, all launched CubeSat missions were analyzed in terms of their attitude control methodologies, sizes, altitudes and mission types. In light of the mission analysis, a prototype 3U CubeSat was designed with only commercial off-the-shelf components to check the practicality and feasibility of the method. The Linear Quadratic Regulator control method with gain scheduling was used to stabilize and control the attitude in a high-fidelity simulation environment. In simulations, the method stabilized the CubeSat and maintained the desired attitude under varying conditions such as initial angular velocity and displacement, orbit altitude and inclination, shifting mass fraction and CubeSat alignment and size.
Benzer Tezler
- Turksat 3usat uydusu'nun yapısal tasarımı
Structural design of turksat 3usat satellite
MURAT SÜER
Yüksek Lisans
Türkçe
2013
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. FIRAT OĞUZ EDİS
- Hava aracı otopilot destek sistemi olarak bir pilot sağlık takip sistemi tasarımı, prototiplenmesi ve entegrasyonu
Design, prototyping and integration of a pilot health monitoring system as a support system for aircraft autopilot
EFKAN YILMAZ
Yüksek Lisans
Türkçe
2020
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ RAMAZAN YENİÇERİ
- Design and performance analysis of a mini unmanned coaxial helicopter
İnsansız eşeksenli mini helikopterin tasarım ve performans analizi
BELKIS ERZİNCANLI
Yüksek Lisans
İngilizce
2008
Uçak Mühendisliğiİstanbul Teknik Üniversitesiİleri Teknolojiler Ana Bilim Dalı
PROF. DR. A. RÜSTEM ASLAN
- Safe software system development framework for mini unmanned aerial systems
Mini insansız hava araçları için güvenli yazılım geliştirme iskeleti
ÖNDER ALTAN
Yüksek Lisans
İngilizce
2014
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolOrta Doğu Teknik ÜniversitesiHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN NAFİZ ALEMDAROĞLU
- Katlanabilir kanatlara sahip bir insansız hava aracının tasarımı, üretimi ve testleri
Design, manufacturing and testing on unmanned air vehicle with foldable wings
İREM ÖZGÜR
Yüksek Lisans
Türkçe
2019
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. GÖKHAN İNALHAN