Silikon elastomerlerin durulma özelliklerini kontrol eden parametrelerin belirlenmesi
Indentification of the factors controlling the relaxation behavior of silicone elastomers
- Tez No: 521593
- Danışmanlar: PROF. DR. MURAT ŞEN
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Polimer Bilim ve Teknolojisi, Chemistry, Polymer Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Hacettepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 134
Özet
Bu tezin temel amacı vinil-metil-polisiloksan (VMQ) kullanılarak hazırlanan silikon elastomerlerin durulma özelliklerini kontrol eden parametrelerin incelenmesidir. Bu amaçla ilk aşamada hazırlanacak karışımların homojen olması, zincir kesilmesi yaşanmaması için karışımda kullanılan rotorların hızları ve karışma süresi değerleri üzerinde optimizasyon yapılmaya çalışılmıştır. Karışımlar banbury tipi millere sahip laboratuvar tipi tork reometre karıştırıcıda hazırlanmıştır. Farklı peroksit tipi ve oranları kullanılarak bir dizi karışım hazırlanmıştır. İkinci aşamada elde edilen hamurlar, Hareketli Kalıp Reometresi (MDR) kullanılarak farklı sıcaklıklarda kür edilmiştir. Elde edilen tork-zaman grafiklerinden kauçuğun reolojik parametreleri belirlenmiştir. Reometre eğrileri birinci derecede kinetik modelle göre analiz edilmiş ve vulkanizasyon sıcaklığının vulkanizasyon hızı üzerindeki etkisi ve peroksit tipi, peroksidin oranının vulkanizasyon aktivasyon enerjisi üzerindeki etkisi aydınlatılmıştır. daha sonra hamurlar, elde edilen reolojik bilgiler ile belirlenen sıcaklık ve sürelerde sıcak pres kullanılarak pişirilmiştir. Bir sonraki aşamada ise örneklerin çapraz bağ yoğunluklarını Puls-NMR tekniği kullanılarak hesaplanmıştır. Ayrıca, Sıcaklık Taramalı Gerilme Durulma(TSSR) tekniği kullanılarak pişirilmiş hamurların durulma davranışları gözlemlenmiştir. Tezin son aşamada kürleşmiş bu örneklere fiziko mekanik testler ve farklı sulu ortamlarda yaşlandırma testleri uygulanmıştır. Elastomerlerin yaşlanmaya karşı kararlılığını kontrol eden faktörler belirlenmiştir.
Özet (Çeviri)
The main purpose of this thesis is to examine the parameters controlling the relaxation properties of silicone elastomers prepared using vinyl-methyl-polysiloxane (VMQ). For this purpose, the speeds of the rotors used in the mix and the mixing time values have been tried to be optimized so that the mixture to be prepared in the first stage is homogeneous and chain cutting is not experienced. The mixtures were prepared in a lab-type torque rheometer mixer with a banbury type mill. A number of mixtures were prepared using different types and proportions of peroxide. The compound obtained in the second step were cured at different temperatures using the Moving Die Rheometer (MDR). The rheological parameters of the rubber were determined from the obtained torque-time graphs. The rheometer curves were analyzed at first degree by kinetic model and the effect of vulcanization temperature on the vulcanization rate and the effect of peroxide type, peroxide ratio on the activation energy of vulcanization were elucidated. Then the compound are cured using the hot press at the temperatures and times determined by the obtained rheological information. In the next step, the crosslink density of the samples was calculated using Pulse-NMR technique. In addition, the relaxation behaviors of cured elastomer were observed using the Temperature Scanning Stress Relaxation (TSSR) technique. Physico-mechanical tests and aging tests in different aqueous media were applied to these samples cured at the last stage of the thesis. Factors controlling the aging stability of elastomers have been identified.
Benzer Tezler
- Farklı ko-ajanlar varlığında kürleştirilmiş silikon elastomerlerin özelliklerine iyonlastırıcı radyasyonun etkisi
The effect of ionizing radiation on the properties of silicone elastomers cured in the presence of different co-agent
DAVUT AKSÜT
Doktora
Türkçe
2020
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. MURAT ŞEN
- Silikon elastomerlerin durulma özelliklerine hızlandırıcı tipinin ve oranının etkisi
Effect of accelerator type and ratio on the relaxation behaviors of silicone elastomers
ELİF KAYMAZLAR
- Sıcaklık taramalı gerilim gevşemesi (TSSR) yöntemi ile vinil metil silikon (VMQ) elastomerinin çapraz bağ yoğunluğunun belirlenmesini sınırlayan koşullar
Conditions that limiting the determination of crosslink density of vinyl methyl silicone (VMQ) elastomer by means of temperature scanning stress relaxation (TSSR)
ŞERİFE MERVE ALKUR
Yüksek Lisans
Türkçe
2021
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. MURAT ŞEN
- Investigation of thermal aging of styrene butadiene rubber/ethylene propylene diene monomer blends
Stiren butadien kauçuk ve etilen propilen dien kauçuk karışımlarının ısıl yaşlandırmalarının incelenmesi
ZEYNEP SONGUR
Yüksek Lisans
İngilizce
2017
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NURSELİ UYANIK
- Silikon elastomerlerin ömür süresine etki eden parametrelerin belirlenmesi
Identification of the parameters effecting the lifetime of silicone elastomers
MUKADDES MELİKE ONAY
Yüksek Lisans
Türkçe
2020
Polimer Bilim ve TeknolojisiHacettepe ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. MURAT ŞEN