Geri Dön

Flexible polyurethane rebond foam prepolymer sythesis with low polymeric diisocyonate content

Düşük diizosiyonat yoğunluklu esnek poliüretan prepolimer bağlayıcı sentezi

  1. Tez No: 526397
  2. Yazar: CİHAN EFE KILIÇ
  3. Danışmanlar: DOÇ. DR. FERDA HACIVELİOĞLU, DOÇ. DR. OKAN ESENTÜRK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: İngilizce
  9. Üniversite: Gebze Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 78

Özet

Poliüretanlar (PUs) mekaniksel esneklik gibi beklenen birçok fiziksel ve kimyasal özellik gösterebilmelerinden dolayı yapıştırıcı alanında sıklıkla tercih edilmektedir. Bu çalışmada, düşük NCO oranı içeren üç farklı prepolimer sentezlenerek, bu prepolimerin kimyasal, fiziksel ve mekaniksel özelliklerinin incelenmesi gerçekleştirilmiştir. İlk olarak, petrol bazlı poliol kullanılarak izosiyanat uçlu prepolimer sentezlenmiştir. Prepolimerin mukavemet, viskozite, yapışkanlık değerlerinin karşılaştırılabilmesi için biyo bazlı poliol kullanılarak farklı NCO/OH oranında, izosiyanat uçlu prepolimer sentezlenmiştir. Fourier Transform Infrared-Attenuated Total Reflectance Spectroscopy (FTIR-ATR) ve H1 Nuclear Magnetic Resonance Spectroscopy (H1 NMR) tekniği kullanılarak çapraz bağlayıcı olarak MDI ve pMDI'nın hidrojen bağı ile bağlanma derecesine etkisi gözlemlenmiştir. Farklı poliol guruplarının poliüretanin mekanik, kimyasal ve fizikler özelliklere etkisi Diferansiyel taramalı kalorimetre (DSC), termal Gravimetric Analysis (TGA) ve X-Ray kırınım (XRD) ile incelenmiştir. PUs lerin yüzey mormolojisi Atomik Kuvvet Mikrsokobu (AFM) ile incelenmiştir. Brokfield rotasyonal viskometre kullanılarak farklı poliollerin PUs ler üzerindeki etkisi incelenmiştir.

Özet (Çeviri)

Desirable chemical and physical properties of Polyurethanes (PUs) such as mechanical flexibility associated with their chemical structure make these polymers attractive for adhesive applications. In this work, three types of isocyanate functional prepolymers were synthesized with low isocyanate (NCO) content to observe their chemical, physical and mechanical properties. Initially, isocyanate terminated prepolymer were synthesized through single step with petroleum passed polyol. In order to compare the durability, viscosity and tackiness of prepolymer, bio-based polyols used to synthesize isocyanate functional prepolymers with different NCO/OH content. The effect of MDI and pMDI as a cross-linker on the degree of H-bonding was examined by Fourier Transform Infrared-Attenuated Total Reflectance Spectroscopy (FTIR-ATR) and H1 Nuclear Magnetic Resonance Spectroscopy (H1 NMR). Also the effect of alternative polyols on mechanical, chemical, and physical properties on the polyurethane were analyzed with differential scanning calorimeter (DSC), Termal gravimetric Analysis (TGA) and X-ray diffraction (XRD). Atomic force microscopy (AFM) was used to determine PUs morphology and roughness. Brookfield rotational viscometer were used to differentiate the polyols effect on the PUs.

Benzer Tezler

  1. Farklı yoğunluk ve türdeki esnek poliüretan köpükler için glikolize atık polietilen tereftalat parçacıklarından PET poliester poliol sentezi

    PET polyester polyol synthesis from glycolized waste polyethylene terephthalate particles for flexible polyurethane foams of different density and types

    ZEYNEP KÖROĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Kimya MühendisliğiMarmara Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. SEYFULLAH MADAKBAŞ

  2. Deney tasarımı yöntemiyle bir esnek poliüretan sünger üretim prosesinin optimizasyonu

    Optimization of a flexible polyurethane foam manufacturing process with the experimental design method

    BEHİCE KÜBRA ŞAHİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Endüstri ve Endüstri MühendisliğiErciyes Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF. DR. MİTHAT ZEYDAN

  3. Multiobjective optimization of slabstock polyurethane foam production process

    Blok poliüretan sünger üretimi sürecinin çokamaçlı eniyileştirilmesi

    NEŞE YILDIZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Kimya MühendisliğiEge Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA DEMİRCİOĞLU

  4. Biyo-esaslı biyobozunur poliol kullanılarak esnek poliüretan köpük sentezi

    Synthesis of flexible polyurethane foam using a new type of bio-based polyol

    ECEM BALCI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Kimya MühendisliğiGebze Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MERVE MOCAN

  5. Esnek poliüretan köpük üretiminden kaynaklanan atıklardan elde edilen poliolün esnek poliüretan köpük üretiminde kullanılması

    Use of polyol obtained from wastes resulting from flexible polyurethane foam production in the production of flexible polyurethane foam

    YAPRAK AKSU

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. HANZADE AÇMA