Synthesis and characterization of oleophobic fluorinated polyester films
Başlık çevirisi mevcut değil.
- Tez No: 539745
- Danışmanlar: Dr. IGOR LUZINOV
- Tez Türü: Doktora
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Clemson University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 204
Özet
Özet yok.
Özet (Çeviri)
The study presented in this dissertation is dedicated to the synthesis and characterization of oleophobic fluorinated polyester films. Specifically, the blending of oleophilic polyethylene terephthalate (PET) with low surface energy materials such as fluorinated polyesters has been used in order to fabricate oleophobic PET films. First, fluorinated polyesters (P(PF-oate-R)) possessing different end-groups (-COOH, -OH and -CF3) are synthesized via polycondensation reaction of isophthaloyl chloride with perfluoro ether alcohols. Then, they are solvent-blended with PET at various concentrations to obtain oleophobic polyester films of different compositions. In addition, the films are annealed to investigate the effect of annealing on surface properties of the films. The results show that the obtained PET/P(PF-oate-R) polyester films demonstrate low wettability that depended on the polyester end-groups, film compositions, and annealing. It is found that PET blended with fluorinated polyesters terminated with CF3 groups exhibit higher contact angle (CA) with water and oils than other polyesters. In addition, CA increases with increasing P(PF-oate-R) polyester content in blends. To facilitate the oleophobicity of PET films, the fluorinated polyesters terminated with -CF3 groups with two different Mw were synthesized and blended with PET. The results reveal that at low concentrations, low molecular weight polyesters migrate to the surface easily, resulting in higher surface coverage. Thus, it leads to higher water and oil repellency. On the other hand, when they are used at high concentrations, higher molecular weight polyesters in blends reduce the wettability of the surface to the higher level. It is found that the wettability of the PET film surface depends on not only the Mw of polyesters, but also on annealing protocol. To this end, the effects of the annealing temperature on surface wettability are also examined.
Benzer Tezler
- Synthesis, characterization and applications of fluorine containing maleimide polymers
Flor içeren maleimid polimerlerinin sentezi, karakterizasyonu ve uygulamaları
İPEK KAYALI
Yüksek Lisans
İngilizce
2024
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. TUBA ÇAKIR ÇANAK
- Polilaktik asit/polistiren/çinko oksit nanokompozit sentezi ve yağ-su ayırmadaki etkinliğinin incelenmesi
Polylactic acid/polystyrene/zinc oxide nanocomposite synthesis and investigation of its efficiency in oil-water separation
HANDE ZİNCİRKARA
Yüksek Lisans
Türkçe
2023
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. AYLA ALTINTEN
- Başlatıcılı kimyasal buhar biriktirme yöntemi ile farklı uygulamalar için polimerik membranların sentezi ve karakterizasyonu
Characterization and synthesis of polymeric membranes for different applications by initiated chemical vapor deposition method
FATMA SARIİPEK
Doktora
Türkçe
2015
Kimya MühendisliğiSelçuk ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA KARAMAN
- Synthesis and characterization of alkaline earth and rare earth bonophosthate compounds
Toprak alkali ve nadir toprak alkali metal borfosfat bileşiklerinin sentezlenmesi ve karakterizasyonu
ABDÜLHADİ BAYKAL
Doktora
İngilizce
1999
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MERAL KIZILYAYLI
- Synthesis and characterization of a cyclodextrin based artificial enzyme
Siklodekstrin tabanlı bir yapay enzimin sentezi ve karakterizasyonu
NAZİTA YOUSEFİEH
Yüksek Lisans
İngilizce
1999
BiyoteknolojiOrta Doğu Teknik ÜniversitesiBiyokimya Ana Bilim Dalı
DOÇ. DR. ENGİN UMUT AKKAYA