Hassas döküm yöntemiyle üretilen metalik biyomalzemelerin lazerle yüzey özelliklerinin geliştirilmesi
Improving the surface properties of metallic biomaterials with laser fabricated by investment casting method
- Tez No: 546271
- Danışmanlar: DOÇ. DR. MUSTAFA TÜRKMEN
- Tez Türü: Yüksek Lisans
- Konular: Bilim ve Teknoloji, Biyoteknoloji, Mühendislik Bilimleri, Science and Technology, Biotechnology, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Kocaeli Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Biyomedikal Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 70
Özet
Bu çalışmada, endüstride yaygın olarak kullanılan alaşımlardan; 316L paslanmaz çelik malzemelerin hassas döküm yöntemi ile üretimi gerçekleştirilmiştir. Mikroyapıya bağlı olarak sertlik değerleri, geliştirilebilen ve kontrol edilebilen özelliklerin önemli bir aşamasını oluşturmaktadır. Bu amaçla hassas döküm yöntemi ile üretimi gerçekleştirilen 316L paslanmaz çelik malzemenin halihazırda ticari olarak kullanılan 316L paslanmaz çelik ile mikroyapı ve sertlik özellikleri arasındaki farklar irdelenmiştir. Ayrıca, iki farklı üretim yöntemi ile üretilen 316L malzemelerin yüzeyinde fiber lazerinin meydana getirdiği değişimler incelenmiştir. Kullanılan lazerin her iki yöntemle üretilen 316L malzemesinin yüzey yapısında farklı değişiklikler yaptığı gözlenmiştir. Malzemenin yüzeyi vücut sıvıları ve biyomalzeme arasında bir tampon olduğundan yüzey özellikleri ile biyouyuyumluluk arasında ilişki olduğu bilinmektedir. Bu çalışmada sitotoksisite testlerinden biri olan L929 hücre büyüme testi uygulanmış ve böylece lazerle yüzey işlemenin her iki yöntemle üretilen 316L malzemelerin biyouyuyumluluklarını nasıl etkilediği kıyaslamalı olarak incelenmiştir.
Özet (Çeviri)
In this study, the alloys commonly used in industry; 316L stainless steel materials were fabricated by investment casting method. Hardness values, depending on the microstructure, constitute an important stage of the properties that can be improved and controlled. For this purpose, the difference between the microstructure and hardness properties of 316L stainless steel material which is produced by precision casting method and the commercially used 316L stainless steel is examined. In addition, the changes of the fiber laser on the surface of 316L materials manufactured by two different production methods were examined. It was observed that the laser used made different changes in the surface structure of the 316L material produced by both methods. Since the surface of the material is a buffer between body fluids and biomaterials, it is known that there is a relationship between surface properties and biocompatibility. In this study, one of the cytotoxicity tests, L929 cell growth test was applied. In this way, It was comparatively investigated how laser surface treatment affects the biocompatibility of 316L materials manufactured by both methods.
Benzer Tezler
- Eklemeli imalat destekli dereceli hassas döküm yöntemi ile bal peteği yapıların üretimi ve karakterizasyonu
Production and characterization of honeycomb structures by additive manufacturing-aided investment flask mould casting method
FATİH GÜLER
Yüksek Lisans
Türkçe
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. ÖZGÜL KELEŞ
DR. LEVENT TURHAN
- Enjeksiyon döküm kalıplarına uygulanan farklı kaplamaların kalıp ömrüne etkisi
Effect of different coatings applied to injection casting molds on mold life
AHMET TURAN KARAOĞLAN
Yüksek Lisans
Türkçe
2018
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- Microstructure of titanium alloys produced by investment casting method
Hassas döküm yöntemiyle üretilen titanyum alaşımlarının mikroyapısı
VOLKAN BARIŞ SARICIOĞLU
- Hassas döküm yöntemiyle üretilen femoral diz komponentlerinde seramik maça kullanımı ile talaşlı imalat minimizasyonu
Minimization of machining by using ceramic cores during the investment casting process of femoral knee components
CEVAT YILMAZ
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. NECİP ÜNLÜ
- Hassas döküm yöntemiyle alüminyum A356 alaşımdan açık gözenekli (hücreli) metal köpük üretimi ve ısı eşanjörüne uygulanması
Production of open cell metal foam by investment casting method from aluminium A356 alloy and application to heat exchanger
KORAY DÜNDAR
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiGebze Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. METİN USTA
DR. LEVENT TURHAN