Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces
Başlık çevirisi mevcut değil.
- Tez No: 563355
- Danışmanlar: Prof. MIKE BRADLEY
- Tez Türü: Doktora
- Konular: Gıda Mühendisliği, Food Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: İngilizce
- Üniversite: University of Greenwich
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 183
Özet
Özet yok.
Özet (Çeviri)
The firm adhesion of flavouring particles onto snack surfaces during coating processes is a major concern in the snack production industry. Detachment of flavouring powders from products during handling and production stages can lead to poor appearance and reduced taste of the product as well as substantial financial losses for the industry, in terms of variable flavour performance and extended cleaning down time of fugitive particle build!up on process equipment. Understanding the adhesion strength of applied bulk particulates used for flavouring formulations will help analysts to evaluate the efficiency of coating processes and potentially enable them to assess the adhesion strength of newly formulated flavouring powder prior to commitment to full scale plant trials. Meeting this object has required the development of an over!arching review of the adhesion mechanisms as a primary step. Based on this overview to the work of previous researchers, technological gaps and promising techniques have been identified for further research and development. A prototype of a novel adhesion tester called an Impact Adhesion Tester (IAT) has been designed and constructed. The development of the overall tester design is presented, and details of its parts and the resulting tester are discussed. The IAT and its experimental procedure were primarily designed and implemented for use in the snack industry, in particular, for the measurement and evaluation of the key factors affecting the adhesion behaviour of flavour powder onto snack surfaces qualitatively and quantitatively. This measurement can indicate the percent flavour powder loss within production stages (from coating to packing) and in package. The instrument has been evaluated using different materials and substrates subjected to different coating conditions such as rotational speed of the drum, retention time in drum, the amount of surface oil and the amount of powder applied. By plotting the detachment versus impact force, the difference has been obtained between adhesion strength of different flavouring powders (which is a strong function of particle size, particle shape, particle density and surface oil content of the snack). In addition to the above work, ultra!centrifuge method was used as a reference for comparison. The research work conducted using IAT on flavouring powders has proved the importance of particle adhesion strength and that the particle adhesion strength can reflect the changes in particle loss, based on particle characteristics as well as process conditions during snack production. It proved that bench size IAT would be a useful tester to measure adhesion strength of particles. The results obtained from experiments have confirmed that the tester may be able to usefully determine the variations between different powder materials. However the tester needs to be further evaluated by industrialists and researchers before possible use or commercialisation.
Benzer Tezler
- Teknoloji tabanlı girişimlerin erken aşama destekleri ile ilgili mevcut durum analizi ve girişimlerin erken aşama desteklerden faydalanabilmesi için değerlendirme metod önerisi
Current status analysis of earyl stage support of technology-based initiatives and evaluation metod recomendation for initiatives to benefit from early stage support
TUBA ÖZTEPE
Yüksek Lisans
Türkçe
2021
Mühendislik Bilimleriİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
PROF. DR. FERHAN ÇEBİ
- Erişkinlerde öz bildirime dayalı hesaplanan beden kitle indeksi verileri için düzeltme faktörleri geliştirilmesi
The development of correction factors for self-reported body mass index values in adults
MUSTAFA BARAN İNCİ
Tıpta Uzmanlık
Türkçe
2019
Halk SağlığıSakarya ÜniversitesiHalk Sağlığı Ana Bilim Dalı
PROF. DR. HASAN ÇETİN EKERBİÇER
- Afet yönetiminde kullanılabilir acil durum modülü için hızlı-kolay-tekrarlanabilir bir kurulum modeli geliştirilmesi ve hizmet alt yapısının kurgulanması
Development of a quick-easy-repeatable installation model and establishment of service infrastructure for emergency situation module usable in disaster management
YASEMİN ERDOĞAN BİTER
Doktora
Türkçe
2023
MimarlıkMimar Sinan Güzel Sanatlar Üniversitesiİç Mimarlık Ana Bilim Dalı
DOÇ. DR. ESİN SARIMAN ÖZEN
- Dijital dönüşüm ortamında yalın itfaiye sistemi tasarımı
Designing a lean firefighting system in the context of digital transformation
AYŞE ÜTÜK
Doktora
Türkçe
2024
Endüstri ve Endüstri MühendisliğiYıldız Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HAYRİ BARAÇLI
- Türkiye İnşaat Sektöründe Risk Yönetimi Olgunluğu Üzerine Değerlendirme
Risk management maturity assessment on the construction sectory in turkey
DİLEK EREN
Yüksek Lisans
Türkçe
2019
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. HÜSEYİN ATİLLA DİKBAŞ