Geri Dön

Biyosentez yöntemi ile üretilen metalik nanopartikül kullanarak modifiye edilmiş silikajel nanokompozitlerin elde edilmesi, karakterizasyonu ve boyar madde giderimi

Obtaining of modified silica gel nanocomposites by using metallic nanoparticles produced by biosynthesis method,characterization and dyestuff removal

  1. Tez No: 565079
  2. Yazar: BURCU AKYOL ORAL
  3. Danışmanlar: DR. ÖĞR. ÜYESİ BÜLENT KIRKAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Çevre Mühendisliği, Chemistry, Environmental Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Süleyman Demirel Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Su Yönetimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 86

Özet

Bu çalışmada; indirgeyici ajan olarak defne yaprağının (Laurus nobilis) su ekstraktı kullanılmış ve modifiye silikajel destekli SiCl@AgNP, SiCl@CuNP, SiNH2@AgNP ve SiNH2@CuNP nanokompozitleri biyosentez yöntemi ile sentezlenmiştir. Sentezlenen nanokompozitlerin yapıları FTIR, UV-Vis, XRD ve SEM yöntemleri ile karakterize edilmiştir. Daha sonra elde edilen nanokompozitler sulu çözeltiden metilen mavisi boyar maddesinin giderimi için adsorbent olarak kullanılmıştır. Adsorpsiyon üzerine, çözelti pH'ı, temas süresi, adsorbent dozu, başlangıç boyar madde konsantrasyonu ve sıcaklığın etkisi incelenmiştir. Bu çalışmada SiCl@AgNP ve SiCl@CuNP nanokompozitlerinin en yüksek metilen mavisi giderim kapasitesine sahip olduğu belirlenmiştir. Langmuir, Freundlich ve Dubinin-Radushkevich (D-R) izoterm modelleri uygulanmış; MM boyar maddesinin adsorpsiyon denge verilerinin Langmuir izoterm modeline daha iyi uyduğu gözlemlenmiştir. Elde edilen termodinamik parametrelere göre her iki nanokompozit için adsorpsiyonun ΔG değerlerinin negatif olduğu görülmüştür. ΔH ve ΔS değerlerinin ise pozitif değerde olduğu belirlenmiştir. Gibbs serbest enerjisi, entropi ve entalpi parametreleri için elde edilen değerler MM adsorpsiyonunun uygulanabilirliğini ve endotermik yapısını göstermiştir. Bu sonuçlar ışığında, SiCl@AgNP ve SiCl@CuNP nanokompozitlerinin sulu çözeltilerden MM boyar maddesinin giderimi için düşük maliyetli ve etkili bir adsorban olduğu sonucuna varılabilir. Bu nedenle sentezlenen bu nanokompozitlerin diğer katyonik boyaların adsorpsiyonu için de bir adsorbent olarak kullanılabileceği düşünülmektedir.

Özet (Çeviri)

In this study; the water extract of the bay leaf (Laurus nobilis) was used as a reducing agent and SiCl@ AgNP, SiCl@CuNP, SiNH2@AgNP and SiNH2@CuNP nanocomposites with modified silicagel were synthesized by the biosynthesis method. The structures of synthesized nanocomposites were characterized by FTIR, UV-Vis, XRD and SEM methods. Subsequently, the obtained nanocomposites were used as the adsorbent for the removal of methylene blue dyestuff from the aqueous solution. The effect of solution pH, contact time, adsorbent dose, initial dye concentration and temperature on adsorption was investigated. In this study, it was determined that SiCl@AgNP and SiCl@CuNP nanocomposites had the highest methylene blue removal capacity. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models were applied to the equilibrium data in adsorption; It was observed that the adsorption equilibrium data of methylene blue dyestuff fits better with Langmuir isotherm model. According to the obtained thermodynamic parameters, the adsorption ΔG values for both nanocomposites were negative. ΔH and ΔS values were positive. The values obtained for Gibbs free energy, entropy and enthalpy parameters indicated the feasibility and endothermic structure of MM adsorption. In the view of these results, it can be concluded that SiCl@AgNP and SiCl@CuNP nanocomposites can be utilized as a low cost and effective adsorbent in removal of MM dye from aqueous solutions. Therefore, it is thought that these synthesized nanocomposites can also be used as an adsorbent for the adsorption of other cationic dyes.

Benzer Tezler

  1. Investigation of cobalt resistance in Rhodobacter sphaeroides at molecular level

    Rhodobacter sphaeroides'de kobalt direncinin moleküler düzeyde incelenmesi

    GÜNEŞ ATAY

    Doktora

    İngilizce

    İngilizce

    2024

    Biyoteknolojiİstanbul Teknik Üniversitesi

    Moleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı

    PROF. DR. ZEYNEP PETEK ÇAKAR

  2. Fischer-Tropsch sentezi̇ i̇le hafi̇f olefi̇n üreti̇mi̇ i̇çi̇n azot ve bor doplu akti̇f karbon destekli̇ demi̇r katali̇zörleri̇ni̇n geli̇şti̇ri̇lmesi̇

    Development of nitrogen and boron doped activated carbon supported iron catalysts for light olefin production by Fischer-Tropsch synthesis

    PINAR ŞAKOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ALPER SARIOĞLAN

    DR. OSMAN OKUR

  3. Alglerden yeşil sentez ile metalik nanopartiküllerin üretim optimizasyonu ve bu nanopartiküllerin antibakteriyal etkinliklerinin incelenmesi

    Production optimization of metallic nanoparticles by green synthesis from algae and investigation of antibacterial activities of these nanoparticles

    ANIL TEVFİK KOÇER

    Doktora

    Türkçe

    Türkçe

    2023

    BiyomühendislikYıldız Teknik Üniversitesi

    Biyomühendislik Ana Bilim Dalı

    PROF. DR. DİDEM ÖZÇİMEN

  4. Production and characterization of ZnO nanoparticles by biosynthesis

    Biyosentez ile ZnO nanopartiküllerinin üretim ve karakterizasyonu

    MOHANAD FAWZI MUTAR MUTAR

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    BiyofizikÇankırı Karatekin Üniversitesi

    Fizik Ana Bilim Dalı

    DOÇ. DR. OLCAY GENÇYILMAZ

  5. The effect of gold nanoparticles synthesized by green synthesis method in an In Vitro Alzheimer's disease model

    Yeşil sentez yöntemi ile sentezlenen altın nanoparçacıklarının In Vitro alzheimer hastalığı modeli üzerindeki etkisi

    SULTAN SAADOON AZBAH ALNAMRI

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    BiyomühendislikBahçeşehir Üniversitesi

    Biyo ve Nano Teknoloji Mühendisliği Ana Bilim Dalı

    Assist. Prof. Dr. CANAN BAĞCI