Atık polistiren köpüğünün bitümün bazı mühendislik özelliklerine etkisinin araştırılması
Research on the effect of waste polystyrene foam on some engineering properties of asphal concrete
- Tez No: 569749
- Danışmanlar: DR. ÖĞR. ÜYESİ KÜRŞAT YILDIZ
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 70
Özet
Doğal kaynakların hızla yok olması, çevrenin hızla kirlenmesi canlılar için hayati önem taşırken öte yandan çevrenin korunması konusunda da kaygıları artırmaktadır. Hemen hemen hayatımızın her safhasında kullanılan polimer malzemelerin nüfus artışıyla doğru orantılı olarak artması insanoğlunu geri dönüşüm arayışlarına itmiştir. Günümüzde geri dönüşüm çalışmaları atık kaynağının önlenmesi veya azaltılması, geri dönüştürülerek yeniden kullanılması, geri dönüştürülemeyenlerin yok edilmesi şeklindedir. Bu bilgiler ışığında, atık polistiren köpüğünün yol üst yapısında bağlayıcı olarak kullanılan bitüm“asfalt çimentosu”içerisinde kullanılabilirliği çalışmamıza temel teşkil etmiştir. Çalışma kapsamında bitümün penetrasyon, yumuşama noktası, parlama noktası, özgül ağırlığı ve duktilitesi gibi fiziksel özellikleri üzerine etkileri araştırılmıştır. Ayrıca bu çalışma atık polistiren köpüğünün bitümün kimyasına, reolojisine, mekanik özelliklerine etkisinin de araştırılabileceği birçok çalışma konusuna temel teşkil edebileceği öngörülmektedir. Söz konusu çalışmada, atık polistiren köpüğü, katkı maddesi olarak, 50/70 penetrasyon değerine sahip olan asfalt çimentosu ile 150° C derecede karıştırılarak homojen hale getirilmiştir. Katkı maddesinin, asfalt çimentosunda kullanım oranı (bitümün ağırlığına göre) literatüre dayanarak %2; %4; %6 ve %8 olarak belirlenmiştir. Hazırlanan numuneler üzerinde asfalt çimentosu deneylerine tabi tutulmuştur. Daha sonra ise elde edilen veriler TS, ASTM ve KGM şartnamelerine göre analiz edilerek deney sonuçları değerlendirilmiştir. Sonuç olarak, atık polistiren köpüğünün asfalt çimentosunun üzerinde olumlu etki gösterdiği ve sıcak bölgelerdeki yol üstyapısı tasarımında Karayolları teknik şartnamesine (KTŞ) uygunluğu tespit edilmiştir.
Özet (Çeviri)
The rapid disappearance of natural resources, the rapid pollution of the environment is vital for the living while raising concerns about the protection of the environment. Almost every step of our life, the increase in the proportion of polymer materials used in the direct proportion of the increase in the search for the recycling of human beings. Today, recycling efforts are the prevention or reduction of waste resources, recycling, and re-use, destruction of non-recyclables. The information that usability of waste polystyrene foam in the light in the bitumen“Asphalt cement”used as a binder on the road pavement was the basis for our study. In the study, the effects of bitumen on physical properties such as penetration, softening point, flash point and durability were investigated. It is also anticipated that this study may be able to underpin many studies on the effects of waste polystyrene foam on the chemistry, rheology, and mechanical properties of bitumen. In this study, waste polystyrene foam was homogenized as an addictive by mixing with asphalt concrete having penetration value of 50/70 at 150 °C. The rate of use of the addictive in asphalt concrete (based on the weight of the bitumen) was 2%; 4%; 6% and 8%. The samples were subjected to the above-mentioned experiments on the prepared samples. Then, the obtained data were analyzed according to TS, ASTM and HTS specifications and the test results were evaluated. As a result, it was determined that the waste polystyrene foam had a positive effect on the asphalt concrete and the features required for the design of the road superstructure in the hot zones were determined to conform to the Highway Technical Specification (HTS).
Benzer Tezler
- Cam köpüğü-çimento-kum karışımının hafif dolgu malzemesi olarak geoteknik özellikleri
Geotechnical properties of glass foam-cement-sand mixtures as a lightweight fill material
ERMAN YİĞİT TUNCEL
Yüksek Lisans
Türkçe
2012
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. BERRAK TEYMÜR
- Suda petrol kirliliğinin atık strafor, çaylifi ve polistiren köpük sorbentleri ile giderilmesi
Removal of oil pollution in water by using waste styrofoam, tea fiber and polystyrene sorbents
EBRU LALE UĞURLU
Yüksek Lisans
Türkçe
2013
Kimya MühendisliğiGazi ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. METİN GÜRÜ
- Köpük model döküm yönteminde döküm ve model parametrelerinin incelenmesi
Investigation of casting and pattern parameters in lost pattern casting proccess
NECATİ YALÇIN
Doktora
Türkçe
2006
Kimya MühendisliğiGazi ÜniversitesiMakine Eğitimi Ana Bilim Dalı
DOÇ. DR. KADİR KOCATEPE
PROF. DR. SÜLEYMAN TEKELİ
- Optimization of polymer resin systems for tubular composites
Tübüler kompozitler için polimer reçine sistemlerinin optimizasyonu
ELMAS ŞEYDA
Yüksek Lisans
İngilizce
2018
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ALİ KILIÇ
- Atık polietilen alüminyum, ay çekirdeği kabuğu ve testere talaşı karışımından üretilen biyokompozitlerin fiziksel ve mekanik özelliklerinin araştırılması
Investigation of physical and mechanical properties of biocomposites produced from waste polyethylene aluminum, sunflower shell and sawdust mixture
BUSE NUR ERDİNÇ
Yüksek Lisans
Türkçe
2023
Ağaç İşleriİstanbul Üniversitesi-CerrahpaşaOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. NADİR AYRILMIŞ