Soğan tasnif makinasının konstrüksiyonu ve prototipin yapımı
Onion classifiationmachine, design and prototype contruction
- Tez No: 57308
- Danışmanlar: PROF. DR. BÜLENT EKER
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Ziraat, Mechanical Engineering, Agriculture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1996
- Dil: Türkçe
- Üniversite: Trakya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 61
Özet
m SUMMARY Master of Science Thesis ONION CLASSIFICATION MACHINE, DESIGN AND PROTOTYPE CONSTRUCTION Levent GÜNAYDIN Thrace University The Institute of Natural Sciences Agricultural Machinery Supervisor: Prof. Dr. Bülent EKER. 1996, Page: 51 Jury: Prof. Dr. Bülent EKER (Supervisor) Prof. Dr. Selçuk ARIN Assoc. Prof. Dr. Bahattin AKDEMİR In the marketing of agricultural products, homogenity is the aim of standardization. Today all the agricultural products are sold accordance with the international standards. In many countries the same standards apply for domestic market. In the highly competitive international markets of today, it is almost impossible to sell products that faü to meet international standards. This facts requires developing countries to be more careful. In this study the design and construction of an onion classification machine that classifies onion according to the standards of the latest technology and marketing conditions. Onion has been an important product both regionally and nationally. The prototype is constructed at Tekirdağ Industrial and Vocational High School Workshop. For the classification of onion, a single sieve with three different sections is used. The diameters of the holes of first section is 25 mm. The seconds 40 mm. and the third 72 mm. A collection box is located under each section. For those, which do not fall into any box a forth box is located. For sieving“ crank biyel ”mechanism is employed. The system worked with an electric engine and to slow down the motor rotation a redactor is used,12 The onions loaded in a container located over the sieve dropped on the sieve via a slopping surface. Prototype machine is loaded manualley. The machine is tried in two different rotation speeds, 140 rotation / minute and 200 rotation / minute. Sieve angle is 8 and sieve stroke is 44 mm. During performance evaluation, onions in each collection box are measured equatoriaUy and wrong and right size onions in each box are counted.
Özet (Çeviri)
m SUMMARY Master of Science Thesis ONION CLASSIFICATION MACHINE, DESIGN AND PROTOTYPE CONSTRUCTION Levent GÜNAYDIN Thrace University The Institute of Natural Sciences Agricultural Machinery Supervisor: Prof. Dr. Bülent EKER. 1996, Page: 51 Jury: Prof. Dr. Bülent EKER (Supervisor) Prof. Dr. Selçuk ARIN Assoc. Prof. Dr. Bahattin AKDEMİR In the marketing of agricultural products, homogenity is the aim of standardization. Today all the agricultural products are sold accordance with the international standards. In many countries the same standards apply for domestic market. In the highly competitive international markets of today, it is almost impossible to sell products that faü to meet international standards. This facts requires developing countries to be more careful. In this study the design and construction of an onion classification machine that classifies onion according to the standards of the latest technology and marketing conditions. Onion has been an important product both regionally and nationally. The prototype is constructed at Tekirdağ Industrial and Vocational High School Workshop. For the classification of onion, a single sieve with three different sections is used. The diameters of the holes of first section is 25 mm. The seconds 40 mm. and the third 72 mm. A collection box is located under each section. For those, which do not fall into any box a forth box is located. For sieving“ crank biyel ”mechanism is employed. The system worked with an electric engine and to slow down the motor rotation a redactor is used,12 The onions loaded in a container located over the sieve dropped on the sieve via a slopping surface. Prototype machine is loaded manualley. The machine is tried in two different rotation speeds, 140 rotation / minute and 200 rotation / minute. Sieve angle is 8 and sieve stroke is 44 mm. During performance evaluation, onions in each collection box are measured equatoriaUy and wrong and right size onions in each box are counted.
Benzer Tezler
- Karadeniz bölgesinde halk arasında geleneksel olarak kullanılan bitkilerin günümüze kadar yayınlanmış literatürden derlenmesi, tasnif edilmesi ve veritabanının oluşturulması
Compiling, classifying and creating a database of plants from the literature published to date which are traditionally used by the people in the black sea region
ÖZGÜL MELEK GENÇ
Yüksek Lisans
Türkçe
2023
BotanikZonguldak Bülent Ecevit ÜniversitesiBiyoloji Ana Bilim Dalı
DR. ÖĞR. ÜYESİ YASİN HAZER
- Ebû Tâlib el-Mekkî'nin (ö. 386/996) düşüncesinde dinî ilimlerin gelişimi ve tasavvuf
The development of religious sciences in the thought of Abû Tâlib el-Mekkî and sufism
MERVE SAĞAN
Yüksek Lisans
Türkçe
2018
DinYalova ÜniversitesiTemel İslam Bilimleri Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HACI BAYRAM BAŞER
- Modern selefî söylemde Mâtürîdîlik eleştirisi
The critique of Māturīdism in modern salafi discourse
SEMA ATİK
Yüksek Lisans
Türkçe
2022
DinHitit ÜniversitesiTemel İslam Bilimleri Ana Bilim Dalı
PROF. DR. MEHMET EVKURAN
- 1946 - 1960 arası (VIII-IX-X-XI. Dönem) TBMM Yozgat milletvekilleri ve faaliyetleri
The Yozgat Deputies of Turkish Grand National Assembly between 1946-1960 (VIII-IX-X-XI. period) and their activities
HALİL İBRAHİM YILMAZ
Yüksek Lisans
Türkçe
2017
TarihNevşehir Hacı Bektaş Veli ÜniversitesiTarih Ana Bilim Dalı
YRD. DOÇ. DR. HÜSEYİN KALEMLİ
- İstihbaratın demokratik gözetimi
Democratic surveillance of intelligence
NEVİN ÇİFCİ
Yüksek Lisans
Türkçe
2019
Kamu YönetimiKütahya Dumlupınar ÜniversitesiKamu Yönetimi Ana Bilim Dalı
DOÇ. DR. FATİH KIRIŞIK