Eko kompozitlerin üretimi ve karakterizasyonu
Manufacturing and characterization of eco copmposites
- Tez No: 575531
- Danışmanlar: PROF. DR. TAMER SINMAZÇELİK
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Ekolojik Kompozit, Ekonomik Kompozit, Mekanik ve Tribolojik Özellikler, Partikül Takviyeli Kompozit, Ecologic Composites, Economic Composites, Mechanical and Tribological Properties, Particle Reinforced Composites
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Kocaeli Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 180
Özet
Son yıllarda; polimer malzemelerin özelliklerinin iyileştirilmesi ve bitmiş ürün maliyetinin düşürülmesi amacı ile takviye malzemesi olarak partikül malzemelerinin kullanımı giderek yaygınlaşmaktadır. Bununla birlikte son ürünlerin ekonomik olmaları kadar, çevre dostu olması yönünde yürütülen çabalar da giderek artış göstermektedir. Bu çerçevede takviye elemanı olarak farklı organik kökenli (fındık, fıstık ve ceviz kabuğu) malzemeler ile inorganik esaslı (patlatılmış perlit, olivin ve midye kabuğu) takviye partikülleri poli(fenilen sülfid) (PPS) ile polipropilen (PP) matris malzemeleri takviye edilmiştir. Üretilen numunelerin mekanik ve tribolojik özellikleri yapılan deneyler ile incelenmiştir. Midye kabuğu takviyesinin PPS'in mekanik özelliklerini olumlu yönde etkilemediği, tribolojik özellikleri açısından bakınca ise adhezif aşınmasına olumsuz etki ederken erozif aşınma ve çizilme direncine olumlu yönde etkidiği görülmüştür. Patlatılmış perlit takviyesinin PPS'nin hem mekanik özelliklerini hem de tribolojik özelliklerini iyileştirdiği görülmüştür. Aynı şekilde olivin takviyesinin PPS'nin hem mekanik hemde tribolojik özelliklerini olumlu yönde etkilediği gözelenmiştir. Öğütülmüş fındık kabuğu takviyesinin PP'nin mekanik özellikleri üzerine olumlu yönde etki ettiği gözlenmiştir. Tribolojik özellikler üzerine etkisi incelendiğinde fındık kabuğu takviyesi ile adhezif aşınma direncinin artış gösterdiği, çizilme direncinin olumsuz yönde etkilendiği, erozif aşınma direncinin ise aşındırıcı tanelerin çarpma açısına bağlı olarak düşük açılarda olumsuz etkilediği yüksek açılarda ise olumlu etkilediği gözlenmiştir. Fıstık kabuğuğu takviyesinin PP'nin hem mekanik özelliklerni hemde tribolojik özelliklerini olumlu yönde etkilediği görülmüştür. Ceviz kabuğu takviyesinin de PP'nin hem mekanik hemde tribolojik özelliklerini olumlu yönde etkilediği gözlenmiştir.
Özet (Çeviri)
In recent years; The use of particulate materials as a reinforcing material for the purpose of improving the properties of polymer materials and reducing the cost of finished products. In addition, efforts to make the end products as environmentally friendly as the economic ones are increasing. In this context, reinforcing materials of different organic origin (hazelnut, peanut and walnut shell) and inorganic based (exploded perlite, olivine and mussel shell) reinforcing particles were reinforced with poly (phenylene sulfide) (PPS) and polypropylene (PP) matrix materials. Mechanical and tribological characterization of the samples were investigated by experiments. It has been observed that the mussel shell reinforcement does not affect the mechanical properties of PPS positively and it has a positive effect on the erosive wear and çizilme resistance while it has a negative effect on adhesive wear. It has been observed that the expanded perlite reinforcement improves both the mechanical properties and tribological properties of PPS. Olivine reinforcement has been shown to affect both mechanical and tribological properties of PPS positively. It has been observed that the ground nut shell reinforcement has a positive effect on the mechanical properties of PP. When the effect on the tribological properties were examined, it was observed that the adhesive wear resistance increased with the nut shell reinforcement, the çizilme resistance was negatively affected, and depending on the particle impact angle, the erosive wear resistance was adversely affected at low impingement angles and positively affected at high impingement angles. Due to the impact angle of the abrasive grains. It has been observed that peanut shell reinforcement positively affects both the mechanical and tribological properties of PP. It has been determined that walnut shell reinforcement positively affects both mechanical and tribological properties of PP.
Benzer Tezler
- Bazı kompozitlerde elastik ve termal iletim özellikleri arasındaki ilişkinin deneysel olarak belirlenmesi
The experimental determination of the relationship between elastic properties and thermal conductivity of some composites
VİLDAN ÖZKAN
Doktora
Türkçe
2012
Fizik ve Fizik MühendisliğiEskişehir Osmangazi ÜniversitesiFizik Ana Bilim Dalı
PROF. M. SELAMİ KILIÇKAYA
YRD. DOÇ. İSMAİL HAKKI SARPÜN
- Hidromagnezit-huntit (HH) kullanarak güç tutuşur poli (laktik asit) esaslı kompozit malzeme üretimi ve sinerjik etki çalışmaları
Production of flame retardent based poly (lactid acid) composite material using hidromagnesite–huntite (HH) and synergic effect studies
AYŞEGÜL ERDEM
Doktora
Türkçe
2022
Tekstil ve Tekstil MühendisliğiErciyes ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET DOĞAN
- Biyo-reçine esaslı tekstil kompozitlerinin performans özelliklerinin incelenmesi
Investigation of performance characteristics of bio-resin based textile composites
SEMİH ÖZKÜR
Yüksek Lisans
Türkçe
2021
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ İPEK YALÇIN ENİŞ
- Çeşitli atıklardan elde edilen karbonun, tekstil üzerine uygulanarak, enerji teknolojilerinde ve elektriksel iletkenlik isteyen diğer uygulamalarda kullanımının araştırılması
Research of applying carbon derived from various wastes on textiles, their use in energy technologies, and applications requiring electrical conductivity
SEMA SERT
Doktora
Türkçe
2023
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiGüneş Enerjisi Ana Bilim Dalı
PROF. DR. AYŞEGÜL KÖRLÜ
- Yapı bileşeni olarak kullanılan yapı tekstillerinin biçimsel ve işlevsel analizi ve yapı bileşeni performansına etkisi
Formal and functional analysis of building textiles used as building components, and their effect on building components performance
NEVA KIRDAR