Truncated conical shells as absorbers of impact force
Başlık çevirisi mevcut değil.
- Tez No: 583918
- Danışmanlar: Dr. PETR TOMEK
- Tez Türü: Doktora
- Konular: Mühendislik Bilimleri, Ulaşım, Engineering Sciences, Transportation
- Anahtar Kelimeler: finite element method, energy absorption, truncated cone, crashworthiness
- Yıl: 2018
- Dil: İngilizce
- Üniversite: University of Pardubice
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 131
Özet
Özet yok.
Özet (Çeviri)
In this dissertation, energy absorption capabilities of steel-based truncated conical shells with low base angle and end caps are investigated under axial dynamic loading. The numerical models of absorber were placed between two rigid plates to simulate a crush box around the absorber. In order to investigate the effect of the design parameters on the energy absorption of the conical shells, three different base conical angle (20, 25 and 30), four different impact velocity (5m/s, 10m/s, 20m/s, 30m/s), four different absorber thickness (4mm, 6mm, 8mm, 10mm) and several impact mass values were analyzed. Numerical analyses were performed by FEM software Abaqus. The simulation results were compared by means of several performance parameters such as peak reaction force Fp, mean reaction force Fm, absorbed energy EA specific energy absorption (SEA), crash force efficiency (CFE) and dynamic amplification factor (DAF). In this dissertation, also some guidelines on the design of a truncated conical shell with low base conical angle as an energy absorber are presented.
Benzer Tezler
- Enine kayma deformasyonu içeren homojen olmayan anizotrop çapraz tabakalı kesik koni kabukların değişik basınç yükleri etkisi altında burkulma davranışı
The buckling behavior of non-homogeneous anisotropic cross-ply laminated truncated conical shells including transverse shear deformation under different external loads
POLAT ÖZYİĞİT
Doktora
Türkçe
2015
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ABDULLAH AVEY
- Fonksiyonel değişimli malzemelerle ( FDM'ler ) kaplı sandviç koni kabukların serbest titreşim davranışının kayma deformasyonlu kabuk teorisi ( KDKT ) kullanarak incelenmesi
The study of free vibration behaviors of sandwich conical shells covered with functionally graded materials ( (FGM'S ) using the shear deformation shell theory ( SDST )
ERDAL OSMANÇELEBİOĞLU
Doktora
Türkçe
2018
İnşaat MühendisliğiSüleyman Demirel Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ABDULLAH AVEY
- Farklı sınır koşullarının heterojen ortotropik kesik konik kabukların stabilitesine etkisi
The effect of different boundary conditions on the stability behavior of heterogeneous orthotropic truncated conical shells
MAHMUD SİYAMİ GEVREK
Yüksek Lisans
Türkçe
2023
İnşaat MühendisliğiYozgat Bozok Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ POLAT ÖZYİĞİT
- Kompozit konik kabuğun serbest titreşimi
Başlık çevirisi yok
HASAN ÖRENEL
Yüksek Lisans
Türkçe
1996
Astronomi ve Uzay Bilimleriİstanbul Teknik ÜniversitesiDOÇ.DR. ZAHİT MECİTOĞLU
- Eğrisel kabuk yapılar, katlanmış plak ve kutu kesitli kirişlerin bilgisayar yardımı ile çözümü
Başlık çevirisi yok
CENGİZ DURAN ATIŞ