Geri Dön

Grafen oksit/polipirol/polivinil alkol nanokompozit ve türevlerinin nanofiber süperkapasitör cihaz uygulamaları

Nanofiber supercapacitor device applications of graphene oxide/polypyrrole/polyvinyl alcohol nanocomposite and their derivatives

  1. Tez No: 650226
  2. Yazar: YELİZ YÜRÜK
  3. Danışmanlar: PROF. DR. MURAT ATEŞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Nanolif, Süperkapasitör, Elektrospin, İletken polimer, Grafen, Nanofiber, Supercapacitor, Electrospinning, Conductive polymer, Graphene
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Tekirdağ Namık Kemal Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalışmada süperkapasitörler için elektrot malzemesi olarak geniş yüzey alanlarına ve yüksek spesifik kapasitans değerlerine ulaşılmak amacıyla nanolif yapıların kullanılması tercih edilmiştir. Elektrot materyali olarak kullanılacak olan bu kompozit nanolifleri üretmek için en etkin yöntem olan elektrospin yöntemi tercih edilmiştir. Bu yöntemde, hazırlanan polimer kompozit şırınganın içine yerleştirilir ve şırınga ucuna 25 kV'a kadar gerilim uygulanır. Besleyici ünitedeki şırınganın ucunda duran polimer damlası kritik bir voltaj değerine kadar küresel bir biçimde bulunur. Uygulanan potansiyel fark bir eşik değerine ulaştığı anda ise polimer damlası koni biçimini alır ve voltajdaki çok küçük bir artışla birlikte koni ucundan bir jet fışkırır. Bu jette besleme ünitesine belli bir mesafe uzağına yerleştirilen toplayıcı levhaya doğru farklı yollar izleyerek ilerler ve nanofiber yapıları oluşturulmuştur. Bu yöntemde kullanılan GO, rGO, PPy, GO/PPy/KS, rGO/PPy/KS, GO/PPy/PVA, rGO/PPy/PVA, GO/PPy/PVA/KS, rGO/PPy/PVA/KS malzemelerin sentezleri başarıyla gerçekleştirilmiş ve termogravimetrik analiz (TGA-DTA), BET yüzey analizi, taramalı elektron mikroskobu-enerji dağılımlı X ışınları analizi (SEM-EDX), Raman spektroskopi, Fourier dönüşümlü kızılötesi spektroskopisi (FTIR-ATR), X ışınları kırınımı (XRD), atomik kuvvet mikroskobu (AFM), katı iletkenlik gibi yöntemlerle karakterize edilmiştir. Ayrıca, devre modeli analizi ile devre parametreleri incelenmiştir. Sentezlenen malzemeler iki elektrot sistemli 1 M H2SO4 çözeltisi ile süperkapasitör cihaz oluşturulmuştur. Cihaz performans testleri 3 farklı methodla döngüsel voltametri (CV), galvanostatik şarj/deşarj (GCD), elektrokimyasal empedans spektroskopisi (EIS) ile test edilmiştir. Ayrıca, spesifik kapasitans (Csp), enerji ve güç yoğunlukları, süperkapasitör cihazın stabilite testlerinden sonra kapasitans koruma değerleri bu tezde raporlandı.

Özet (Çeviri)

In this study, it was preferred to use nanofiber structures as electrodes for supercapacitors to reach large surface areas and high specific capacitance values. These nanofiber structures were produced by electrospinning method, which is the most effective method for the production of polymer-based nanofibers. In this method, the prepared composite material is placed a syringe and applied to 25 kV voltage to fabricate carbon based nanofiber structures. The composite drop at the tip of the syringe in the feeder unit is found spherically up to a critical voltage value. As soon as the potential difference applied reaches a threshold value, the composite drop takes the form of a cone, and with a very small increase in voltage, a jet burst from the cone tip. In this jet, it follows different paths towards the collector plate placed a certain distance away from the feeding unit and its composite nanofiber structures are obtained. GO, rGO, PPy, GO/PPy/CB, rGO/PPy/CB, GO/PPy/PVA, rGO/PPy/PVA, GO/PPy/PVA/CB, rGO/PPy/PVA/CB materials have been successfully synthesized and characterized by thermogravimetric analysis (TGA-DTA), BET surface analysis, scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR-ATR), X-ray diffraction (XRD), atomic force microscopy (AFM) and solid state conductivity. In addition, circuit model analysis have been performed to understand circuit parameters. The composite materials have been tested in the two electrode system in 1 M H2SO4 solution via three different methods: Cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and electrochemical impedance spectroscopy (EIS). Furthermore, the specific capacitance (Csp), energy and power densities, capacitance retention values after long-term stability tests of supercapacitor devices were reported in this thesis.

Benzer Tezler

  1. Development of nanocomposite electrodes and separators for supercapacitors

    Süperkapasitörler için nanokompozit elektrotlar ve ayıraçların geliştirilmesi

    ALPTEKİN AYDINLI

    Doktora

    İngilizce

    İngilizce

    2022

    EnerjiOrta Doğu Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. HÜSNÜ EMRAH ÜNALAN

  2. İndirgenmiş grafen oksit/polipirol elektrodunun elektrokimyasal enerji depolama özelliklerinin incelenmesi

    Investigation of elektrochemical energy storage properties of reduced graphene oxide/polypyrrole electrode

    TÜLİN KOSUKOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Fizik ve Fizik MühendisliğiBursa Uludağ Üniversitesi

    Fizik Ana Bilim Dalı

    PROF. DR. AHMET PEKSÖZ

  3. Grafen kuantum nokta/ metal oksit/ iletken polimer içeren nanokompozitlerin süperkapasitör performanslarının incelenmesi

    Investigation of supercapacitor performances of nanocomposites containing graphene quantum dot/metal oxide/conductive polymer

    BERAY ALYAKUT

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Kimya MühendisliğiAnkara Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. NURAY YILDIZ

  4. Grafen oksit temelli nanokompozitlerin sentezi, karakterizasyonu ve fototermal etkinliklerinin incelenmesi

    Synthesis, characterization and examination of photothermal activities of graphene oxide based nanocomposites

    BENGÜ GETİREN

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Kimya MühendisliğiAnkara Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    PROF. DR. NURAY YILDIZ

  5. KS/MnO2/PPy VE rGO/MnO2/PTTh nanokompozitlerinin sentezi, karakterizasyonu ve süperkapasitör uygulamaları

    Synthesis, characterization and supercapacitator applications of CB/MnO2/PPy AND rGO/MnO2/PTTh nanocomposites

    ÖZGE KUZGUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    EnerjiTekirdağ Namık Kemal Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. MURAT ATEŞ