Axi-symetrical structural systems made up of straight members from geometrical, architectural and statistical view point
Doğrusal çubuk elemanlardan oluşan dönel simetrik taşıyıcı sistemlerin geometrik, mimari ve statik açıdan incelenmesi
- Tez No: 65527
- Danışmanlar: DOÇ. DR. ATİLLA ORBAY
- Tez Türü: Yüksek Lisans
- Konular: Mimarlık, Architecture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1997
- Dil: İngilizce
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 87
Özet
ÖZET Çubuk elemanların oluşturduğu 3 boyutlu strüktürel sistemlerin gelişimi 19. yy sonlarında önem kazanmıştır. Uzay strüktür olarak adlandırılan bu sistemlerin avantajı, sadece çekme ve basınç çubuklarından meydana gelmeleri, yani diğer sistemlerde görülen moment aktarımlarının bulunmamasıdır. Uzay sistemlerin gelişimi prefabrikasyon ve çelik kullanımının gelişimine paralel olmuştur. Uzay strüktürlerin kullanıma başlanmasıyla, büyük açıklıkları geçmedeki zorluk ve kısıtlamalar aşılmıştır. Bunun yanısıra bilgisayarın da devreye girmesi ve gelişmesiyle statik çözümlemeler çok daha hızlı ve doğru bir şekilde sonuçlandırılabilmektedir. Yapılan bu tezin amacı, geometrik açıdan incelendiğinde farklı tiplerde oluşturulan merkezi dönel ağ kubbelerin seri üretime ve ihtiyaca cevap veren tiplerini seçmek, strüktürel açıdan incelendiğinde ise bir bilgisayar programı yardımıyla sistemdeki çubuk kuvvetlerinin hesaplanarak, çubuk tiplerinin seçilmesi, toplam çubuk ağırlık ve uzunluklarının bulunması, çubuk tip ve sayılarının bulunup gruplanmasıdır.
Özet (Çeviri)
ABSTRACT An important stage on three dimensional structural system constructed by linear member's combination was on the last decades of 19th century. The advantage of this system called“space structure”is dominantly the use of member in compression and in tension compared to the other systems that use bending moment. The development of space structure is parallel to the use of prefabrication and steel constructions. The development that allows prefabrication in structure, begins in the 19th century with the use of members selected on defined length and sections. By the invention of space structure the disadvantage of structural span's limitation is overcome with these modern systems. Additionally the statical analysis can be accomplished rapidly with computers. The purpose of the thesis in point of geometrical view is: The design of axi-symmetrical structural system geometry prototypes, selections of a suitable system for mass production that respond defined function are the main purposes of the study. The purpose of the thesis in point of structural view is :To find member forces reacted; to select the types of members, to calculate overall weight and length of the system and to classify the type and number of members, using by computer program which will aid architect to make his decision calculating, excessive solutions about the system required on design process.
Benzer Tezler
- Hücresel yapay sinir ağları için iki öğrenme algoritması ve görüntü işleme uygulamaları
Two learning algorithms for cellular neural networks and their image processing applications
SİNAN KARAMAHMUT
Yüksek Lisans
Türkçe
1994
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiDOÇ.DR. CÜNEYT GÜZELİŞ
- Bileşik dönel yüzeysel taşıyıcı sistemlerin sonlu elemanlar hesabı ve parametrik bir çalışma
Başlık çevirisi yok
AYLA BEYAZ
Yüksek Lisans
Türkçe
1998
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiYapı Mühendisliği Ana Bilim Dalı
PROF. DR. METİN AYDOĞAN
- UO2 yakıt peletlerinin reaktör şartlarında termal ve mikro yapı özelliklerinin incelenmesi ve sıcaklık dağılımının sınır eleman yöntemiyle hesaplanması
Study on thermal and micro structure properties of UO2 fuel pellet in reactor conditions and calculation of its temperature distribution by boundary element method
FERHAN CAN
Doktora
Türkçe
2000
Nükleer Mühendislikİstanbul Teknik ÜniversitesiNükleer Mühendislik Ana Bilim Dalı
PROF. DR. HASBİ YAVUZ
- Eksenel simetrik yükler altında silindirik yapısal elemanların bilgisayar destekli tasarımı
Computer aided desing of circular cylinder structural elements under axisymetrical loading
GEBRAİL BEKDAŞ
Yüksek Lisans
Türkçe
2006
İnşaat Mühendisliğiİstanbul Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. NAMIK KEMAL ÖZTORUN