Seramik kaplamalarda ara malzeme ve porozitenin termal şok üzerine etkisi
Influence of inter layer and porosity on thermal shock in ceramic coatings
- Tez No: 68242
- Danışmanlar: YRD. DOÇ. DR. ABDULLAH MİMAROĞLU
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Finite element technique, thermal barrier coatings, thermal shock, inter layer, porosity, thermal stresses, Surface preparation techniques such as, plasma spraying, physical vapor deposition (PVD), chemical vapor deposition (CVD), detonation gun, flames spraying
- Yıl: 1997
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 95
Özet
temperatures are usually unstable. Whereas ceramic coatings are thermodynamically stable. On the other hand they are easily damaged under the action of thermomechanical stresses. This is due to the mismatch of their thermal expansion coefficients with those of metallic substrates. Finite element technique is a computerized technique for engineering analysis. This technique is widely used for solutions to design challenges in the aerospace, automotive, power, consumer machinery, biomechanics and electrical/electronics industries. In this study, thermal shock analyses were carried out for MgO.Zr02 ceramic coating, NiAl, NiCrAlY and NiCoCrAlY bond coatings and spreodial cast iron substrate materials. In all models, the thickness of MgO.Zr02 coating and substrate were 0,4 and 4 mm, respectively. In the bond coats analysis, NiAL, NiCrAlY and NiCoCrAlY bond coatings were used. The thickness of bond coats was chosen as 0,1, 0,2 and 0,3 mm. Furthermore, the porosity in coating layer was also modelled. The results showed that the thermal stresses are highly influence by bond coating material, bond thickness and with percentage of porosity in coatings. xvi
Özet (Çeviri)
SUMMARY INFLUENCE OF INTER LAYER AND POROSITY ON THERMAL SHOCK IN CERAMIC COATINGS
Benzer Tezler
- Sustainable utilization of chromium mining waste in sodium borosilicate glass-ceramic coating systems
Sodyum borosilikat cam-seramik kaplama sistemlerinde krom madencilik atığının sürdürülebilir kullanımı
KUMRU KARAMAN ÜNLÜTÜRK
Yüksek Lisans
İngilizce
2024
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. BUĞRA ÇİÇEK
- Seramik kaplamalarda sonlu elemanlar yöntemi ile termal şok analizi
Finite element analysis of thermal shock in ceramic coatings
AYŞEGÜL ÇELEBİ
Yüksek Lisans
Türkçe
1996
Metalurji MühendisliğiSakarya ÜniversitesiMetalurji Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. ABDULLAH MİMAROĞLU
- Effect of post treatments on microstructure and mechanical properties of zirconium oxide coatings produced by plasma spraying method
Plazma püskürtme yöntemi ile üretilen zirkonyum oksit kaplamaların mikroyapı ve mekanik özellikleri üzerine son yüzey işlemlerin etkisi
GÖRKEM DEĞİRMENCİ
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiKastamonu ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERKAN ISLAK
- Thermal and mechanical behaviour of plasma-sprayed oxide ceramic coatings on steels
Başlık çevirisi yok
MURAT VURAL
- Uygulanan farklı hızlandırma voltajı türlerinin KA-FBB yöntemi ile üretilen Ti ve TiAlN kaplamaların korozyon davranışları üzerindeki etkisinin incelenmesi
Investigation of the effect of different bias modes applications on the corrosion behavior of Ti and TiAlN coatings produced by CA-PVD technique
DİLAN ER
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KAMİL ÜRGEN