Geri Dön

Toz toplama sisteminin tasarımı ve analizi

Dust collection system design and analysis

  1. Tez No: 682707
  2. Yazar: ŞEYDA BEYPAZARLI
  3. Danışmanlar: PROF. DR. MUSTAFA AKTAŞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Energy
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Enerji Sistemleri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 83

Özet

Kontrolsüz olarak atmosfere bırakılan tozlar ve gazlar hava kirliliğinin en önemli etmenidir. Hava kirletici gazlar üretim sırasında ortaya çıktıklarında belirli limitin üzerinde ise dış ortama egzoz edilemezler. Hava içerisindeki toz, duman gaz gibi hava kirleticiler toz toplama sistemiyle emilir ve filtre edilerek dış ortama aktarılır. Malzemenin başka proseslere gönderilmesi, ezilmesi, karıştırılması ve paketlenmesi gibi endüstriyel işlerin fazla miktarda toz üretmesi insan sağlığını ve çevreyi olumsuz etkilemektedir. Bu ortamlarda hava kirletici miktarının zarar vermeyecek seviyelere getirilmesi için toz toplama sistemleri kullanılmaktadır. Bu tez çalışmasında ilk bölümde toz toplama sistemleri türleri araştırılmıştır. Toz toplama sisteminin performansına etki eden parametreler incelenmiştir. Araştırmalar sonucunda bütünleşik iki kademeli bir toz toplama sistemi tasarımı yapılmıştır. Tasarım analiz edilerek klasik bir toz toplama sistemi ile karşılaştırılmıştır. İki sistemin hesaplamalı akışkanlar dinamiği analizleri yapılmıştır. Klasik sistemde hava girişi toz toplama ünitesinin altından, hava çıkışı üst kısmından gerçekleştirilir ve filtreler dikey konumlandırılmıştır. Yeni sistemde bütünleşik iki kademeli bir toz toplama sistemi tasarlanmıştır. Tasarlanan toz toplama sisteminde hava girişi üst kısımdan gerçekleştirilerek ön filtreleme mekanizmasına yönlendirilmiştir. Analizler sonucunda toz toplama sistemindeki filtre iç merkez hava hızları klasik sistemde 7,38 m/s, yeni tasarlanan sistemde 6,69 m/s olduğu görülmektedir.

Özet (Çeviri)

The most important factors of air pollution are uncontrolled dust and gases released into the atmosphere. The air pollutant gases when they occur during production above certain limits cannot be exhaust to the outside. Air pollutants such as dust and smoke in the air are absorbed and filtered by the dust collection system and transferred to the outside environment. The large amount of dust produced by industrial works such as sending the material to other processes, crushing, mixing and packaging adversely affects human health and the environment. Dust collection systems are used in these environments to bring the amount of air pollutants to non-harmful levels. In this thesis, the types of dust collection systems were investigated in the first chapter. The parameters affecting the performance of the dust collection system were examined. As a result of the researches, a combined two-stage dust collection system was designed. The design was analyzed and compared to a classical dust collection system. Computational fluid dynamics analysis of the two systems were made. In the classical system of the dust collection unit, the air inlet is from the bottom, the air outlet is from the upper part, and the filters are positioned vertically. In the new system, an integrated two-stage dust collection system is designed. In this dust collection system, the air intake is made from the upper part and is directed to the pre-filtering mechanism. As a result of the analyzes, it is seen that the filter inner center air velocities in the dust collection system are 7.38 m/s in the classical system and 6.69 m/s in the newly designed system.

Benzer Tezler

  1. Yangın riski taşıyan açık alanlar için CBS tabanlı, bulut altyapılı, yüksek hassasiyetli, nanofotonik erken yangın tespit sistemi tasarımı ve uygulaması

    Design and implementation of a GIS based, cloud substructured, high sensitive, nanophotonic early fire detection system for fire risk areas

    YÜCEL GÜLLÜCE

    Doktora

    Türkçe

    Türkçe

    2019

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Bilişim Uygulamaları Ana Bilim Dalı

    PROF. DR. RAHMİ NURHAN ÇELİK

  2. Synthesis and characterization of UV-curable and ceramic slurry-loaded epoxy acrylate resin for 3D printing application

    3D baskı uygulaması için UV ile kürlenebilen ve seramik bulamaç yüklü epoksi akrilat reçinenin sentezi ve karakterizasyonu

    İREM ŞEYMA ÖZBALAK

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. YEŞİM GÜRSEL

    DR. MERVE GÜRTEKİN SEDEN

  3. Nanogözenekli süperhidrofilik seramik membran üretimi ve geliştirilmesi

    Production and development of nanoporous superhydrophilic membrane filter

    CEM ÖZGÜR

    Doktora

    Türkçe

    Türkçe

    2009

    Seramik MühendisliğiDumlupınar Üniversitesi

    Seramik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. OSMAN ŞAN

  4. Radyal fan salyangozunun fan performansına etkilerinin HAD yardımı ile incelenmesi

    Investigation of effect of radial fans scroll housing to the performance of fan with using CFD

    MERT GÜNEY

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. LEVENT ALİ KAVURMACIOĞLU

  5. İstanbul'da eğitim donatımlarının planlanmasına ve uygulanmasına yönelik model araştırması

    Model research on planning and application of education infrastructures in Istanbul

    SUAT ÇABUK

    Doktora

    Türkçe

    Türkçe

    2003

    Şehircilik ve Bölge Planlamaİstanbul Teknik Üniversitesi

    Şehir ve Bölge Planlama Ana Bilim Dalı

    PROF. DR. YÜCEL ÜNAL